{"title":"OMGA Machines","description":"\u003cp\u003eOMGA cut-off, mitre and radial arm saws — machines only. Accessories and options are listed separately.\u003c\/p\u003e","products":[{"product_id":"omga-t-50-350","title":"OMGA T 50 350 — 14\" Precision Mitre Chop Saw, 3 HP","description":"\u003cp\u003eThe OMGA T 50 350 is a 14\" precision mitre chop saw built for shops that cut all day. Along with its compound-cutting sibling the T 53 370, it is the heaviest duty machine in OMGA's mitre chop saw line, with a solid cast iron base and head rather than the fabricated or aluminium construction found on lighter saws.\u003c\/p\u003e\n\n\u003cp\u003eThe rotating table rides on roller bearings, which is what keeps the cut accurate as the table is swung through the day. Auto-centering positive stops drop the head onto 45°, 30°, 22½°, 15° and 10° on both sides of centre, and intermediate angles lock manually. The motor is belt driven.\u003c\/p\u003e\n\n\u003cp\u003eCapacity is 6 3\/4\" across at 90° and 4 1\/8\" at 45°, with a maximum depth of cut of 4 5\/16\". The 14\" blade turns at 3,200 RPM off a 3 HP motor. OMGA machines are built in Italy by DIERREGI S.r.l. and supported from OMGA Industries in South Bend, Indiana.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power required.\u003c\/strong\u003e This machine is available in 208V, 230V or 460V three phase only — there is no single-phase version. Select your voltage above before ordering; the machine is built to the voltage you choose and it cannot be changed afterward. If your shop is on single-phase service you will need a phase converter or a rotary phase converter to run this saw.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Iron Base and Head\u003c\/strong\u003e – mass where it matters, so the machine absorbs vibration instead of transmitting it into the cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoller-Bearing Rotating Table\u003c\/strong\u003e – the table stays smooth and repeatable through thousands of angle changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-Centering Positive Stops\u003c\/strong\u003e – 45°, 30°, 22½°, 15° and 10° on both sides, so common angles are found by feel, not by squinting at a scale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual Lock for Intermediate Angles\u003c\/strong\u003e – anything between the stops is still available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt-Driven 3 HP Motor\u003c\/strong\u003e – 3,200 RPM at the arbor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 1\/8\" Dust Chute\u003c\/strong\u003e – connects to shop dust collection out of the box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced in North America from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e14\" (350 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e3 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 90°\u003c\/td\u003e\n\u003ctd\u003e6 3\/4\" (171 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 45°\u003c\/td\u003e\n\u003ctd\u003e4 1\/8\" (105 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum depth of cut\u003c\/td\u003e\n\u003ctd\u003e4 5\/16\" (110 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBevel \/ compound cutting\u003c\/td\u003e\n\u003ctd\u003eNot available on the T 50 350 — see the T 53 370\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePositive stops\u003c\/td\u003e\n\u003ctd\u003e45°, 30°, 22½°, 15°, 10° both sides of centre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable size\u003c\/td\u003e\n\u003ctd\u003e23 5\/8\" × 17 1\/8\" (600 × 435 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust chute diameter\u003c\/td\u003e\n\u003ctd\u003e3 1\/8\" (79 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003eThree phase only — 208V, 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e222 lbs (101 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e26\" × 25\" × 30\" (66 × 64 × 76 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA T 50 350 mitre chop saw, built to the voltage selected above\u003c\/li\u003e\n\u003cli\u003eMachine only. A saw blade is not listed as included — contact us before you order if you need one supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/Pqhg0nnB_Cg\" title=\"OMGA T 50 350 mitre chop saw\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eThis machine ships by freight from OMGA in South Bend, Indiana. Freight is quoted separately once we have your complete delivery address — we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"208V Three Phase","offer_id":52560451502382,"sku":"931500-208","price":7415.0,"currency_code":"USD","in_stock":true},{"title":"230V Three Phase","offer_id":52560451535150,"sku":"931500-230","price":7415.0,"currency_code":"USD","in_stock":true},{"title":"460V Three Phase","offer_id":52560451567918,"sku":"931500-460","price":7415.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/t-50-350.jpg?v=1788391117"},{"product_id":"omga-t-521-st","title":"OMGA T 521 ST — 18\" Pneumatic Up-Cut Pop-Up Saw, 6 HP","description":"\u003cp\u003eThe OMGA T 521 ST is a pneumatic up-cut pop-up saw for production length cutting and defect removal. The blade lives below the table and strokes up through the workpiece on a pneumatic feed, so the operator loads flat against a fence rather than reaching around a swinging head. It is the machine you put at the head of a line when the job is cutting stock to length all shift.\u003c\/p\u003e\n\n\u003cp\u003eBlade feed speed is adjustable, so the stroke can be tuned to the material rather than run flat out on everything. Workpiece clamping is automatic and cycles with the blade stroke, which does two jobs at once: the stock is held before the blade arrives, and the clamp itself acts as the blade guard. The operator's hands are never near the cut.\u003c\/p\u003e\n\n\u003cp\u003eCapacity is 12 5\/8\" across and 5 1\/2\" deep, driven by a 6 HP motor turning an 18\" blade at 3,200 RPM. A 20\" blade is available as an option. The machine ships complete with a Ø450 mm TCT saw blade. OMGA machines are built in Italy by DIERREGI S.r.l. and supported from OMGA Industries in South Bend, Indiana.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power required.\u003c\/strong\u003e This machine is available in 230V or 460V three phase only — there is no single-phase version and no 208V option on this model. Select your voltage above before ordering; the machine is built to the voltage you choose and it cannot be changed afterward. If your shop is on single-phase service you will need a phase converter to run this saw. \u003cstrong\u003eCompressed air is also required\u003c\/strong\u003e, since both the blade feed and the clamp are pneumatic.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp-Cut Pop-Up Design\u003c\/strong\u003e – the blade comes up through the work, so loading is flat against a fence and the blade is buried at rest\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Blade Feed Speed\u003c\/strong\u003e – tune the stroke to the material instead of running one speed on everything\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Clamping In Cycle\u003c\/strong\u003e – the workpiece is clamped by the machine, in sequence with the blade stroke, before the cut begins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp Doubles as Blade Guard\u003c\/strong\u003e – one mechanism holds the stock and shields the cut, keeping the operator clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 HP Motor, 3,200 RPM\u003c\/strong\u003e – sized for continuous production cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18\" Blade Standard, 20\" Optional\u003c\/strong\u003e – ships with a Ø450 mm TCT blade fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6\" Dust Chute\u003c\/strong\u003e – sized for the chip volume this machine actually makes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced in North America from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e18\" (450 mm) — 20\" (500 mm) optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e35 mm (1 3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e6 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum cutting width\u003c\/td\u003e\n\u003ctd\u003e12 5\/8\" (321 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum cutting depth\u003c\/td\u003e\n\u003ctd\u003e5 1\/2\" (140 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade feed\u003c\/td\u003e\n\u003ctd\u003ePneumatic, adjustable speed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamping\u003c\/td\u003e\n\u003ctd\u003eAutomatic, in cycle with blade stroke; doubles as blade guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust chute diameter\u003c\/td\u003e\n\u003ctd\u003e6\" (152 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall dimensions\u003c\/td\u003e\n\u003ctd\u003e28\" × 37\" × 39\" (71 × 94 × 99 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003eThree phase only — 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir supply\u003c\/td\u003e\n\u003ctd\u003eCompressed air required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA T 521 ST up-cut pop-up saw, built to the voltage selected above\u003c\/li\u003e\n\u003cli\u003eØ450 mm (18\") TCT saw blade, fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/ScfYsQDbt7Q\" title=\"OMGA T 521 ST up-cut pop-up saw\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eThis machine ships by freight from OMGA in South Bend, Indiana. Freight is quoted separately once we have your complete delivery address — we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"230V Three Phase","offer_id":52560452124974,"sku":"901521-230","price":18651.0,"currency_code":"USD","in_stock":true},{"title":"460V Three Phase","offer_id":52560452157742,"sku":"901521-460","price":18651.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/t-521-st_805e5ba3-c77f-4abc-84b1-6b64a3cb26bd.jpg?v=1788391151"},{"product_id":"omga-rn-series-radial-arm-saw","title":"OMGA RN Series Radial Arm Saw — RN 450, RN 700 \u0026 RN 900","description":"\u003cp\u003eThe OMGA RN series are precision radial arm saws for furniture makers, frame shops, sawmills and carpentry shops — the kind of machine that lives at the end of a bench and cuts everything that comes through the door. Three sizes share the same build: the RN 450 with a 12\" blade and 4 HP, and the larger RN 700 and RN 900 with 14\" blades and 5 HP.\u003c\/p\u003e\n\n\u003cp\u003eWhat separates these from a job-site radial arm saw is the carriage. It rides on \u003cstrong\u003eeight bearings\u003c\/strong\u003e running on interchangeable steel tracks, and each bearing carries a dust scraper so the track stays clean as the saw is pulled through cut after cut. Tracks that stay clean are tracks that stay accurate, and when they eventually wear, they are replaceable rather than terminal. The main angle positions lock by self-centering, so the common angles are repeatable without measuring.\u003c\/p\u003e\n\n\u003cp\u003eChoose the size by the cut you need. The RN 450 crosscuts 17 3\/4\" and rips 26 3\/4\". The RN 700 goes to 27 1\/2\" crosscut and 36 5\/8\" rip. The RN 900 reaches 35 5\/16\" crosscut and 44 1\/2\" rip — wide enough for sheet-width work. All three turn at 3,200 RPM with a 1\" arbor bore, bevel stops from 0 to 45° and mitre stops at 45-0-45. OMGA machines are built in Italy by DIERREGI S.r.l. and supported from OMGA Industries in South Bend, Indiana.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power required.\u003c\/strong\u003e These machines are available in 208V, 230V or 460V three phase only — there is no single-phase version. Select your model and voltage above before ordering; the machine is built to the voltage you choose and it cannot be changed afterward. If your shop is on single-phase service you will need a phase converter to run one of these saws.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-Bearing Carriage\u003c\/strong\u003e – the saw carriage rides on eight bearings rather than a sliding way, which is where the cut quality comes from\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust Scrapers on the Bearings\u003c\/strong\u003e – the steel tracks and bearings stay clean through the shift instead of packing with sawdust\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable Steel Tracks\u003c\/strong\u003e – tracks are a replaceable wear item, so the machine is rebuildable rather than disposable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Centering Angle Locking\u003c\/strong\u003e – the main angles are found and held repeatably\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBevel 0–45°, Mitre 45-0-45\u003c\/strong\u003e – positive stops on every model in the series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Capacities\u003c\/strong\u003e – 17 3\/4\", 27 1\/2\" or 35 5\/16\" crosscut, so you buy the reach you actually need\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDado Capable\u003c\/strong\u003e – 1 1\/2\" maximum dado on the RN 700 and RN 900\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced in North America from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eRN 450\u003c\/th\u003e\n\u003cth\u003eRN 700\u003c\/th\u003e\n\u003cth\u003eRN 900\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e12\" (305 mm)\u003c\/td\u003e\n\u003ctd\u003e14\" (350 mm)\u003c\/td\u003e\n\u003ctd\u003e14\" (350 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e4 HP\u003c\/td\u003e\n\u003ctd\u003e5 HP\u003c\/td\u003e\n\u003ctd\u003e5 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity\u003c\/td\u003e\n\u003ctd\u003e17 3\/4\" (451 mm)\u003c\/td\u003e\n\u003ctd\u003e27 1\/2\" (699 mm)\u003c\/td\u003e\n\u003ctd\u003e35 5\/16\" (897 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRipping capacity\u003c\/td\u003e\n\u003ctd\u003e26 3\/4\" (679 mm)\u003c\/td\u003e\n\u003ctd\u003e36 5\/8\" (930 mm)\u003c\/td\u003e\n\u003ctd\u003e44 1\/2\" (1,130 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut at 90°\u003c\/td\u003e\n\u003ctd\u003e3 1\/2\" (89 mm)\u003c\/td\u003e\n\u003ctd\u003e4 1\/2\" (114 mm)\u003c\/td\u003e\n\u003ctd\u003e4 1\/2\" (114 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut at 45°\u003c\/td\u003e\n\u003ctd\u003e2 1\/2\" (64 mm)\u003c\/td\u003e\n\u003ctd\u003e3 3\/16\" (81 mm)\u003c\/td\u003e\n\u003ctd\u003e3 3\/16\" (81 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. dado capacity\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003ctd\u003e1 1\/2\" (38 mm)\u003c\/td\u003e\n\u003ctd\u003e1 1\/2\" (38 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBevel positive stops\u003c\/td\u003e\n\u003ctd\u003e0–45°\u003c\/td\u003e\n\u003ctd\u003e0–45°\u003c\/td\u003e\n\u003ctd\u003e0–45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMitre positive stops\u003c\/td\u003e\n\u003ctd\u003e45-0-45\u003c\/td\u003e\n\u003ctd\u003e45-0-45\u003c\/td\u003e\n\u003ctd\u003e45-0-45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable size\u003c\/td\u003e\n\u003ctd\u003e27\" × 21\" (686 × 533 mm)\u003c\/td\u003e\n\u003ctd\u003e35\" × 35\" (889 × 889 mm)\u003c\/td\u003e\n\u003ctd\u003e32\" × 46\" (813 × 1,168 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall dimensions\u003c\/td\u003e\n\u003ctd\u003e27\" × 40\" (69 × 102 cm)\u003c\/td\u003e\n\u003ctd\u003e35\" × 50\" (89 × 127 cm)\u003c\/td\u003e\n\u003ctd\u003e54\" × 46\" (137 × 117 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e246 lbs (112 kg)\u003c\/td\u003e\n\u003ctd\u003e368 lbs (167 kg)\u003c\/td\u003e\n\u003ctd\u003e412 lbs (187 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e35\" × 35\" × 43\"\u003c\/td\u003e\n\u003ctd\u003e52\" × 38\" × 63\"\u003c\/td\u003e\n\u003ctd\u003e63\" × 20\" × 43\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003eThree phase only — 208V, 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA radial arm saw in the model and voltage selected above\u003c\/li\u003e\n\u003cli\u003eMachine only. A saw blade is not listed as included — contact us before you order if you need one supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/86KLolDBDSM\" title=\"OMGA RADIAL 900\/7 radial arm saw\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOMGA have not filmed the RN series on its own. The video shows the \u003ca href=\"\/products\/omga-radial-series-radial-arm-saw\"\u003eRADIAL 900\/7\u003c\/a\u003e, the heavier machine in the same family — the eight-bearing carriage, the pull-through cutting action and the angle locking are the same in principle on the RN saws.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eThis machine ships by freight from OMGA in South Bend, Indiana. Freight is quoted separately once we have your complete delivery address — we confirm the exact cost with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"RN 450 — 12\", 4 HP \/ 208V Three Phase","offer_id":52560476209454,"sku":"900290-208","price":7789.0,"currency_code":"USD","in_stock":true},{"title":"RN 450 — 12\", 4 HP \/ 230V Three Phase","offer_id":52560476242222,"sku":"900290-230","price":7789.0,"currency_code":"USD","in_stock":true},{"title":"RN 450 — 12\", 4 HP \/ 460V Three Phase","offer_id":52560476274990,"sku":"900290-460","price":7789.0,"currency_code":"USD","in_stock":true},{"title":"RN 700 — 14\", 5 HP \/ 208V Three Phase","offer_id":52560476307758,"sku":"900355-208","price":8157.0,"currency_code":"USD","in_stock":true},{"title":"RN 700 — 14\", 5 HP \/ 230V Three Phase","offer_id":52560476340526,"sku":"900355-230","price":8157.0,"currency_code":"USD","in_stock":true},{"title":"RN 700 — 14\", 5 HP \/ 460V Three Phase","offer_id":52560476373294,"sku":"900355-460","price":8157.0,"currency_code":"USD","in_stock":true},{"title":"RN 900 — 14\", 5 HP \/ 208V Three Phase","offer_id":52560476406062,"sku":"900655-208","price":8491.0,"currency_code":"USD","in_stock":true},{"title":"RN 900 — 14\", 5 HP \/ 230V Three Phase","offer_id":52560476438830,"sku":"900655-230","price":8491.0,"currency_code":"USD","in_stock":true},{"title":"RN 900 — 14\", 5 HP \/ 460V Three Phase","offer_id":52560476471598,"sku":"900655-460","price":8491.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/rn-450.jpg?v=1788392265"},{"product_id":"omga-t-53-370","title":"OMGA T 53 370 — 14\" Compound Mitre Chop Saw, 4 HP","description":"\u003cp\u003eThe OMGA T 53 370 is the compound-cutting version of OMGA's heaviest mitre chop saw. Where the T 50 350 swings left and right, the T 53 370 tilts as well, so a mitre and a bevel happen in one pass instead of two setups. For crown, casing, frame stock and anything else that meets at a corner in two planes, that is the difference between a clean job and a fussy one.\u003c\/p\u003e\n\n\u003cp\u003eUnderneath it is the same machine as the T 50 350 and built to the same standard: solid cast iron base and head, a rotating table riding on roller bearings, and auto-centering positive stops at 45°, 30°, 22½°, 15° and 10° on both sides of centre, with manual locking for anything in between. The motor is belt driven and steps up to 4 HP to carry the extra work of an angled cut.\u003c\/p\u003e\n\n\u003cp\u003eCapacity is 6 3\/4\" across at 90° and 4 1\/8\" at 45°, with a maximum depth of cut of 4 5\/16\" flat and 2\" at 45°. Bevelled cross cut reaches 6 1\/4\". The 14\" blade turns at 3,200 RPM. OMGA machines are built in Italy by DIERREGI S.r.l. and supported from OMGA Industries in South Bend, Indiana.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power required.\u003c\/strong\u003e This machine is available in 208V, 230V or 460V three phase only — there is no single-phase version. Select your voltage above before ordering; the machine is built to the voltage you choose and it cannot be changed afterward. If your shop is on single-phase service you will need a phase converter to run this saw.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompound Cutting\u003c\/strong\u003e – mitre and bevel together in a single pass, up to 6 1\/4\" bevelled cross cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Iron Base and Head\u003c\/strong\u003e – mass where it matters, so the machine absorbs vibration instead of putting it into the cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoller-Bearing Rotating Table\u003c\/strong\u003e – smooth and repeatable through thousands of angle changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-Centering Positive Stops\u003c\/strong\u003e – 45°, 30°, 22½°, 15° and 10° on both sides, found by feel rather than by squinting at a scale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual Lock for Intermediate Angles\u003c\/strong\u003e – anything between the stops is still available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt-Driven 4 HP Motor\u003c\/strong\u003e – a full horsepower over the T 50 350, to carry the angled cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 1\/8\" Dust Chute\u003c\/strong\u003e – connects to shop dust collection out of the box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced in North America from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e14\" (350 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e4 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 90°\u003c\/td\u003e\n\u003ctd\u003e6 3\/4\" (171 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 45°\u003c\/td\u003e\n\u003ctd\u003e4 1\/8\" (105 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum bevelled cross cut\u003c\/td\u003e\n\u003ctd\u003e6 1\/4\" (159 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum depth of cut\u003c\/td\u003e\n\u003ctd\u003e4 5\/16\" (110 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum depth of cut at 45°\u003c\/td\u003e\n\u003ctd\u003e2\" (51 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePositive stops\u003c\/td\u003e\n\u003ctd\u003e45°, 30°, 22½°, 15°, 10° both sides of centre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable size\u003c\/td\u003e\n\u003ctd\u003e23 5\/8\" × 17 1\/8\" (600 × 435 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust chute diameter\u003c\/td\u003e\n\u003ctd\u003e3 1\/8\" (79 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003eThree phase only — 208V, 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e255 lbs (116 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e28\" × 28\" × 33\" (71 × 71 × 84 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA T 53 370 compound mitre chop saw, built to the voltage selected above\u003c\/li\u003e\n\u003cli\u003eMachine only. A saw blade is not listed as included — contact us before you order if you need one supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/Pqhg0nnB_Cg\" title=\"OMGA T 50 350 mitre chop saw\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOMGA have not filmed the T 53 370 on its own. The video shows the \u003ca href=\"\/products\/omga-t-50-350\"\u003eT 50 350\u003c\/a\u003e — the same machine, same cast iron base, same table and stops, without the tilting head. Everything you see here applies to the T 53 370; the T 53 370 adds bevel.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eThis machine ships by freight from OMGA in South Bend, Indiana. Freight is quoted separately once we have your complete delivery address — we confirm the exact cost with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"208V Three Phase","offer_id":52560493478190,"sku":"931115-208","price":9981.0,"currency_code":"USD","in_stock":true},{"title":"230V Three Phase","offer_id":52560493510958,"sku":"931115-230","price":9981.0,"currency_code":"USD","in_stock":true},{"title":"460V Three Phase","offer_id":52560493543726,"sku":"931115-460","price":9981.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/t-53-370.jpg?v=1788393055"},{"product_id":"omga-radial-series-radial-arm-saw","title":"OMGA RADIAL Series Heavy-Duty Radial Arm Saw — 900\/7 \u0026 1250\/7","description":"\u003cp\u003eThe OMGA RADIAL series are the heavy end of OMGA's radial arm saw line — 7 HP machines on a \u003cstrong\u003ecast iron arm\u003c\/strong\u003e, built for furniture manufacturers, frame makers, sawmills and carpentry shops that need one machine to do many jobs well rather than one job quickly.\u003c\/p\u003e\n\n\u003cp\u003eWhat makes them versatile is that the head swivels \u003cem\u003eand\u003c\/em\u003e tilts on both the horizontal and vertical axes. That means compound angles, edge work and rip cuts all come off the same machine without a second setup. Both models carry positive stops for bevel from 0 to 45° and mitre at 45-0-45, take a 1 1\/2\" dado, and turn at 3,200 RPM on a 1\" arbor bore.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eRADIAL 900\/7\u003c\/strong\u003e runs an 18\" blade with 35 1\/2\" of cross cut and 43 5\/16\" of rip. The \u003cstrong\u003eRADIAL 1250\/7\u003c\/strong\u003e steps up to a 20\" blade with 49 7\/32\" cross cut and 59\" rip — wide enough to break down full sheets and long stock in one pass. OMGA machines are built in Italy by DIERREGI S.r.l. and supported from OMGA Industries in South Bend, Indiana.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power required.\u003c\/strong\u003e Both models are available in 230V or 460V three phase only — there is no single-phase version and no 208V option on this series. Select your model and voltage above before ordering; the machine is built to the voltage you choose and it cannot be changed afterward. If your shop is on single-phase service you will need a phase converter to run one of these saws.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Iron Arm\u003c\/strong\u003e – the arm is the machine on a radial saw, and cast iron is why these hold a line that a fabricated arm will not\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwivel and Tilt on Both Axes\u003c\/strong\u003e – horizontal and vertical, so compound angles and edge work come off one setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 HP Motor\u003c\/strong\u003e – sized for full-depth cuts in hardwood, all day\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositive Stops\u003c\/strong\u003e – bevel 0–45°, mitre 45-0-45 on both models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 1\/2\" Dado Capacity\u003c\/strong\u003e – grooving and housing work without a second machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Reaches\u003c\/strong\u003e – 35 1\/2\" cross cut on the 900\/7, or 49 7\/32\" on the 1250\/7 for sheet-width work\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Head Feed Available\u003c\/strong\u003e – a factory option on both models for repetitive production cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced in North America from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eRADIAL 900\/7\u003c\/th\u003e\n\u003cth\u003eRADIAL 1250\/7\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e18\" (450 mm)\u003c\/td\u003e\n\u003ctd\u003e20\" (500 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e7 HP\u003c\/td\u003e\n\u003ctd\u003e7 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity\u003c\/td\u003e\n\u003ctd\u003e35 1\/2\" (902 mm)\u003c\/td\u003e\n\u003ctd\u003e49 7\/32\" (1,250 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRipping capacity\u003c\/td\u003e\n\u003ctd\u003e43 5\/16\" (1,100 mm)\u003c\/td\u003e\n\u003ctd\u003e59\" (1,499 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArm\u003c\/td\u003e\n\u003ctd\u003eCast iron\u003c\/td\u003e\n\u003ctd\u003eCast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBevel positive stops\u003c\/td\u003e\n\u003ctd\u003e0–45°\u003c\/td\u003e\n\u003ctd\u003e0–45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMitre positive stops\u003c\/td\u003e\n\u003ctd\u003e45-0-45\u003c\/td\u003e\n\u003ctd\u003e45-0-45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. dado capacity\u003c\/td\u003e\n\u003ctd\u003e1 1\/2\" (38 mm)\u003c\/td\u003e\n\u003ctd\u003e1 1\/2\" (38 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut at 90°\u003c\/td\u003e\n\u003ctd\u003e5 7\/8\" (149 mm)\u003c\/td\u003e\n\u003ctd\u003eConfirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut at 45°\u003c\/td\u003e\n\u003ctd\u003e4 3\/16\" (106 mm)\u003c\/td\u003e\n\u003ctd\u003eConfirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable size\u003c\/td\u003e\n\u003ctd\u003e47\" × 39\" (1,194 × 991 mm)\u003c\/td\u003e\n\u003ctd\u003eConfirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall dimensions\u003c\/td\u003e\n\u003ctd\u003e59\" × 48\" (150 × 122 cm)\u003c\/td\u003e\n\u003ctd\u003eConfirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e800 lbs (363 kg)\u003c\/td\u003e\n\u003ctd\u003eConfirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e63\" × 19\" × 43\"\u003c\/td\u003e\n\u003ctd\u003eConfirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eThree phase only — 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eA note on the 1250\/7 figures marked \"confirmed at order\": the manufacturer's published data sheet for the 1250\/7 currently repeats the 900\/7's dimensions, which cannot be right for a larger machine. Rather than print numbers we cannot stand behind, we confirm those dimensions with OMGA in writing before your order is placed. Blade size, motor, cross cut and rip capacity above are the manufacturer's own stated figures for the 1250\/7.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA RADIAL radial arm saw in the model and voltage selected above\u003c\/li\u003e\n\u003cli\u003eMachine only. A saw blade is not listed as included — contact us before you order if you need one supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/86KLolDBDSM\" title=\"OMGA RADIAL 900\/7 radial arm saw\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVideo shows the RADIAL 900\/7.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eThis machine ships by freight from OMGA in South Bend, Indiana. At 800 lbs and up these are strapped to a pallet and move on a full LTL lane. Freight is quoted separately once we have your complete delivery address — we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"RADIAL 900\/7 — 18\", 7 HP \/ 230V Three Phase","offer_id":52560494493998,"sku":"900209-230","price":16555.0,"currency_code":"USD","in_stock":true},{"title":"RADIAL 900\/7 — 18\", 7 HP \/ 460V Three Phase","offer_id":52560494526766,"sku":"900209-460","price":16555.0,"currency_code":"USD","in_stock":true},{"title":"RADIAL 1250\/7 — 20\", 7 HP \/ 230V Three Phase","offer_id":52560494559534,"sku":"900245-230","price":18526.0,"currency_code":"USD","in_stock":true},{"title":"RADIAL 1250\/7 — 20\", 7 HP \/ 460V Three Phase","offer_id":52560494592302,"sku":"900245-460","price":18526.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/radial-900-7_22d49595-7fed-4086-8403-5c3d2e377df0.jpg?v=1788393158"},{"product_id":"omga-radial-600-p3s","title":"OMGA RADIAL 600 P3S — 14\" Radial Arm Saw, 5 HP, Cast Iron Arm","description":"\u003cp\u003eThe RADIAL 600 P3S sits between OMGA's RN series and the heavy RADIAL 900\/7 — a cast-iron-arm machine at a price much closer to the RN range. If the RN 900 is not quite enough machine but a $16,555 RADIAL 900\/7 is more than the work needs, this is the one in the middle.\u003c\/p\u003e\n\n\u003cp\u003eThe carriage rides on \u003cstrong\u003eeight bearings running on inserted steel tracks\u003c\/strong\u003e, and locking is self-centering at the main angle positions of the arm, the motor and the carriage, with every intermediate angle available under manual lock. Overload protection is standard. It is compact enough to suit feed automation, which is why OMGA points it at furniture makers, sawmills and carpentry shops running repetitive work rather than one-off cuts.\u003c\/p\u003e\n\n\u003cp\u003eCapacity is 24\" of cross cut and 32 5\/16\" of rip, cutting 4 1\/2\" deep at 90° and 3 3\/16\" at 45°, with a 1 1\/2\" dado capacity. The 14\" blade turns at 3,200 RPM off a 5 HP motor. OMGA machines are built in Italy by DIERREGI S.r.l. and supported from OMGA Industries in South Bend, Indiana.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power required.\u003c\/strong\u003e Available in 230V or 460V three phase only — there is no single-phase version and no 208V option on this model. Select your voltage above before ordering; the machine is built to the voltage you choose and it cannot be changed afterward. If your shop is on single-phase service you will need a phase converter to run this saw.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Iron Arm\u003c\/strong\u003e – the same construction as OMGA's heaviest radial saws, at a mid-range price\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-Bearing Carriage on Inserted Steel Tracks\u003c\/strong\u003e – where the cut accuracy comes from, and the tracks are a replaceable wear item\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Centering Locking\u003c\/strong\u003e – at the main angles of the arm, motor and carriage; intermediate angles lock manually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Overload Protection\u003c\/strong\u003e – included, not an option\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Footprint\u003c\/strong\u003e – 35\" × 46\" overall, and suited to feed automation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 1\/2\" Dado Capacity\u003c\/strong\u003e – grooving and housing work on the same machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Head Feed Available\u003c\/strong\u003e – a factory option for repetitive production cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced in North America from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e14\" (350 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e5 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity\u003c\/td\u003e\n\u003ctd\u003e24\" (610 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRipping capacity\u003c\/td\u003e\n\u003ctd\u003e32 5\/16\" (821 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut at 90°\u003c\/td\u003e\n\u003ctd\u003e4 1\/2\" (114 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut at 45°\u003c\/td\u003e\n\u003ctd\u003e3 3\/16\" (81 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. dado capacity\u003c\/td\u003e\n\u003ctd\u003e1 1\/2\" (38 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBevel positive stops\u003c\/td\u003e\n\u003ctd\u003e0–45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMitre positive stops\u003c\/td\u003e\n\u003ctd\u003e45-0-45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArm\u003c\/td\u003e\n\u003ctd\u003eCast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable size\u003c\/td\u003e\n\u003ctd\u003e35\" × 31\" (889 × 787 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall dimensions\u003c\/td\u003e\n\u003ctd\u003e35\" × 46\" (89 × 117 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003eThree phase only — 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e400 lbs (181 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e48\" × 37\" × 35\" (122 × 94 × 89 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA RADIAL 600 P3S radial arm saw, built to the voltage selected above\u003c\/li\u003e\n\u003cli\u003eStandard overload protection\u003c\/li\u003e\n\u003cli\u003eMachine only. A saw blade is not listed as included — contact us before you order if you need one supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/86KLolDBDSM\" title=\"OMGA RADIAL 900\/7 radial arm saw\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOMGA have not filmed the 600 P3S on its own. The video shows the \u003ca href=\"\/products\/omga-radial-series-radial-arm-saw\"\u003eRADIAL 900\/7\u003c\/a\u003e, the larger machine in the same family — same cast iron arm, same eight-bearing carriage on inserted steel tracks, same pull-through cutting action.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eThis machine ships by freight from OMGA in South Bend, Indiana. Freight is quoted separately once we have your complete delivery address — we confirm the exact cost with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"230V Three Phase","offer_id":52560525132078,"sku":"900008-230","price":11185.0,"currency_code":"USD","in_stock":true},{"title":"460V Three Phase","offer_id":52560525164846,"sku":"900008-460","price":11185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/radial-600-p3s_ed088d55-f511-4235-8a93-8d11b8c7ff82.jpg?v=1788395832"},{"product_id":"omga-trf-527-double-mitre-saw","title":"OMGA TRF 527 — 8.5\" Twin-Head Double Mitre Saw for Small Profiles","description":"\u003cp\u003eThe TRF 527 is a twin-head double mitre saw built for small profiles — glass beading strip, thin mouldings, light framing stock. Two heads cut both ends of a piece in one operation, so a length comes off the machine finished at both ends rather than needing a second setup and a second measurement.\u003c\/p\u003e\n\n\u003cp\u003eOne head is fixed and the other traverses on a manual transmission, driven by a hand wheel through a toothed belt so the operator can set the distance between blades quickly and repeat it. Positive locking holds 90° and 45°. Maximum distance between the saws is 7'10\", down to 6 1\/4\" at the short end, on 8.5\" blades turning at 3,200 RPM from two 1.5 HP motors.\u003c\/p\u003e\n\n\u003cp\u003eThis is the small machine in OMGA's double mitre line. If you are cutting structural or furniture stock rather than beading, the TR 2A, TR 2B and TR 2B I take the same idea up to 6 3\/4\" of cross cut.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power and compressed air required.\u003c\/strong\u003e Available in 230V or 460V three phase only — there is no single-phase version. Clamping is pneumatic, so the machine needs a compressed air supply. Select your version and voltage above before ordering; the machine is built to the voltage you choose.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Version\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRF 527\u003c\/strong\u003e – the standard machine. Distance between blades is set by hand wheel and read off the machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRF 527 VIS\u003c\/strong\u003e – adds a \u003cstrong\u003edigital display\u003c\/strong\u003e of the distance between saw blades, so the operator dials in a length instead of eyeballing it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRF 527 NC\u003c\/strong\u003e – adds an \u003cstrong\u003eNC positioner\u003c\/strong\u003e that drives the head to the programmed distance automatically, and includes \u003cstrong\u003etwo horizontal pneumatic clamps\u003c\/strong\u003e not fitted to the other versions. This is the version for repetitive production runs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Heads, One Operation\u003c\/strong\u003e – both ends of a piece cut to a set length in a single cycle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand Wheel and Toothed Belt Traverse\u003c\/strong\u003e – length changes are quick and repeatable, not a fight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositive Locking at 90° and 45°\u003c\/strong\u003e – the two angles this machine spends its life on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for Small Section Stock\u003c\/strong\u003e – glass beading and thin mouldings, where a big double mitre is the wrong tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePneumatic Clamping Included\u003c\/strong\u003e – vertical clamps and centre support come as standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaw Blades Included\u003c\/strong\u003e – the machine ships with blades fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e8.5\" (220 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e2 × 1.5 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. distance between saws\u003c\/td\u003e\n\u003ctd\u003e7'10\" (2,390 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. distance between saws\u003c\/td\u003e\n\u003ctd\u003e6 1\/4\" (159 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. distance between saws at 45°\u003c\/td\u003e\n\u003ctd\u003e6 1\/4\" (159 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 90°\u003c\/td\u003e\n\u003ctd\u003e2 5\/32\" (55 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 45°\u003c\/td\u003e\n\u003ctd\u003e1 9\/16\" (40 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum depth of cut\u003c\/td\u003e\n\u003ctd\u003e1 9\/16\" (40 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBevel \/ compound cutting\u003c\/td\u003e\n\u003ctd\u003eNot available — see the TR 2B I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust chute\u003c\/td\u003e\n\u003ctd\u003e2 × 3 1\/8\" (2 × 79 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003eThree phase only — 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir supply\u003c\/td\u003e\n\u003ctd\u003eCompressed air required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. shipping weight\u003c\/td\u003e\n\u003ctd\u003e650 lbs (295 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e137\" × 27\" × 59\" (348 × 69 × 150 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA TRF 527 in the version and voltage selected above\u003c\/li\u003e\n\u003cli\u003eSaw blades, fitted\u003c\/li\u003e\n\u003cli\u003eMagnetic starter with overload protection\u003c\/li\u003e\n\u003cli\u003eAir filter and regulator\u003c\/li\u003e\n\u003cli\u003eVertical pneumatic clamps and centre support\u003c\/li\u003e\n\u003cli\u003eNC version only: two additional horizontal pneumatic clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/ps5NTa9_KZI\" title=\"OMGA TRF 527 NC double mitre saw\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe video shows the TRF 527 NC — the version with the automatic positioner. The standard and VIS versions are the same machine with the head set by hand wheel instead.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eAt 650 lbs and 137\" crated, this machine ships by freight from OMGA in South Bend, Indiana. Freight is quoted separately once we have your complete delivery address — we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"Standard \/ 230V Three Phase","offer_id":52560563831086,"sku":"900527-230","price":32081.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ 460V Three Phase","offer_id":52560563863854,"sku":"900527-460","price":32081.0,"currency_code":"USD","in_stock":true},{"title":"VIS — Digital Display \/ 230V Three Phase","offer_id":52560563896622,"sku":"900538-230","price":34307.0,"currency_code":"USD","in_stock":true},{"title":"VIS — Digital Display \/ 460V Three Phase","offer_id":52560563929390,"sku":"900538-460","price":34307.0,"currency_code":"USD","in_stock":true},{"title":"NC — Positioner \/ 230V Three Phase","offer_id":52560563962158,"sku":"931118-230","price":44634.0,"currency_code":"USD","in_stock":true},{"title":"NC — Positioner \/ 460V Three Phase","offer_id":52560563994926,"sku":"931118-460","price":44634.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/trf-527.jpg?v=1788398851"},{"product_id":"omga-tr-2a-double-mitre-saw","title":"OMGA TR 2A — 12\" Twin-Head Double Mitre Saw, 2 × 3 HP","description":"\u003cp\u003eThe TR 2A is a twin-head double mitre saw for furniture, frame and millwork shops cutting to length in volume. Both ends of a piece are cut in one cycle, mitred or square, so stock comes off the machine finished rather than going back for a second setup.\u003c\/p\u003e\n\n\u003cp\u003eThe left head is fixed and the right head traverses, with positive locking at 90° and 45° right and left and manual locking anywhere in between. Distance between the saws runs from 8 3\/4\" out to 9'2\", which covers everything from short rail stock to full-length frame members. Two 3 HP motors turn 12\" blades at 3,200 RPM.\u003c\/p\u003e\n\n\u003cp\u003eThe TR 2A is the 12\" machine in the family. Step up to the \u003ca href=\"\/products\/omga-tr-2b-double-mitre-saw\"\u003eTR 2B\u003c\/a\u003e for 14\" blades and 6 1\/2\" of cross cut, or the \u003ca href=\"\/products\/omga-tr-2b-i-double-mitre-saw\"\u003eTR 2B I\u003c\/a\u003e if you need tilting heads for compound work.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power and compressed air required.\u003c\/strong\u003e Available in 230V or 460V three phase only — there is no single-phase version. Clamping is pneumatic, so the machine needs a compressed air supply. Select your version and voltage above before ordering; the machine is built to the voltage you choose.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Version\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTR 2A\u003c\/strong\u003e – the standard machine, head positioned by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTR 2A VIS\u003c\/strong\u003e – adds a \u003cstrong\u003edigital display\u003c\/strong\u003e of the distance between saw blades, so the operator dials in a length rather than measuring it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTR 2A NC\u003c\/strong\u003e – adds an \u003cstrong\u003eNC positioner\u003c\/strong\u003e that drives the head to the programmed distance automatically, and includes \u003cstrong\u003etwo horizontal pneumatic clamps\u003c\/strong\u003e not fitted to the other versions. This is the version for repetitive production.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Heads, One Cycle\u003c\/strong\u003e – both ends cut to a set length in a single operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed Left Head, Traversing Right Head\u003c\/strong\u003e – one reference face stays put, so length is the only variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositive Locking at 90° and 45° Both Sides\u003c\/strong\u003e – with manual locking on intermediate angles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9'2\" Maximum Between Saws\u003c\/strong\u003e – full-length frame and furniture stock in one pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × 3 HP on 12\" Blades\u003c\/strong\u003e – 3,200 RPM at both arbors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePneumatic Clamping and Centre Support Included\u003c\/strong\u003e – not an upsell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaw Blades Included\u003c\/strong\u003e – ships with blades fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e12\" (305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e2 × 3 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. distance between saws\u003c\/td\u003e\n\u003ctd\u003e9'2\" (2,794 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. distance between saws\u003c\/td\u003e\n\u003ctd\u003e8 3\/4\" (222 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. distance between saws at 45°\u003c\/td\u003e\n\u003ctd\u003e15 1\/8\" (384 mm), or 6 11\/16\" (170 mm) with options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 90°\u003c\/td\u003e\n\u003ctd\u003e5 1\/2\" (140 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 45°\u003c\/td\u003e\n\u003ctd\u003e4\" (102 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum depth of cut\u003c\/td\u003e\n\u003ctd\u003e3 1\/2\" (89 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBevel \/ compound cutting\u003c\/td\u003e\n\u003ctd\u003eNot available — see the TR 2B I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust chute\u003c\/td\u003e\n\u003ctd\u003e2 × 3 1\/8\" (2 × 79 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003eThree phase only — 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir supply\u003c\/td\u003e\n\u003ctd\u003eCompressed air required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. shipping weight\u003c\/td\u003e\n\u003ctd\u003e1,438 lbs (652 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e150\" × 39\" × 44\" (381 × 99 × 112 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA TR 2A in the version and voltage selected above\u003c\/li\u003e\n\u003cli\u003eSaw blades, fitted\u003c\/li\u003e\n\u003cli\u003eMagnetic starter with overload protection\u003c\/li\u003e\n\u003cli\u003eAir filter and regulator\u003c\/li\u003e\n\u003cli\u003eVertical pneumatic clamps and centre support\u003c\/li\u003e\n\u003cli\u003eNC version only: two additional horizontal pneumatic clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/mmQHUITNK70\" title=\"OMGA TR Series double mitre saws\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOMGA's TR Series overview — it covers the TR 2A, TR 2B and TR 2B I together, since all three share the same twin-head design.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eAt 1,438 lbs and 150\" crated, this machine ships by freight from OMGA in South Bend, Indiana. It is a full LTL lane and will need a forklift or a loading dock at delivery. Freight is quoted separately once we have your complete delivery address — we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"Standard \/ 230V Three Phase","offer_id":52560564322606,"sku":"901310-230","price":37909.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ 460V Three Phase","offer_id":52560564355374,"sku":"901310-460","price":37909.0,"currency_code":"USD","in_stock":true},{"title":"VIS — Digital Display \/ 230V Three Phase","offer_id":52560564388142,"sku":"901311-230","price":40758.0,"currency_code":"USD","in_stock":true},{"title":"VIS — Digital Display \/ 460V Three Phase","offer_id":52560564420910,"sku":"901311-460","price":40758.0,"currency_code":"USD","in_stock":true},{"title":"NC — Positioner \/ 230V Three Phase","offer_id":52560564453678,"sku":"931312-230","price":52628.0,"currency_code":"USD","in_stock":true},{"title":"NC — Positioner \/ 460V Three Phase","offer_id":52560564486446,"sku":"931312-460","price":52628.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/tr-2a.jpg?v=1788398909"},{"product_id":"omga-tr-2b-double-mitre-saw","title":"OMGA TR 2B — 14\" Twin-Head Double Mitre Saw, 2 × 3 HP","description":"\u003cp\u003eThe TR 2B is the 14\" machine in OMGA's twin-head double mitre line — the same idea as the TR 2A with a bigger blade and a full inch more cross cut. Both ends of a piece are cut in one cycle, mitred or square, so stock leaves the machine finished at both ends.\u003c\/p\u003e\n\n\u003cp\u003eThe left head is fixed and the right head traverses, with positive locking at 90° and 45° right and left, and manual locking on intermediate angles. Distance between the saws runs from 13 3\/16\" out to 9'2\". Two 3 HP motors turn 14\" blades at 3,200 RPM, cutting 6 1\/2\" wide at 90° and 4 1\/2\" at 45°.\u003c\/p\u003e\n\n\u003cp\u003eIf your stock is smaller, the \u003ca href=\"\/products\/omga-tr-2a-double-mitre-saw\"\u003eTR 2A\u003c\/a\u003e does the same job on 12\" blades for less money. If you need to mitre and bevel at once, the \u003ca href=\"\/products\/omga-tr-2b-i-double-mitre-saw\"\u003eTR 2B I\u003c\/a\u003e adds tilting heads.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power and compressed air required.\u003c\/strong\u003e Available in 230V or 460V three phase only — there is no single-phase version. Clamping is pneumatic, so the machine needs a compressed air supply. Select your version and voltage above before ordering; the machine is built to the voltage you choose.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Version\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTR 2B\u003c\/strong\u003e – the standard machine, head positioned by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTR 2B VIS\u003c\/strong\u003e – adds a \u003cstrong\u003edigital display\u003c\/strong\u003e of the distance between saw blades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTR 2B NC\u003c\/strong\u003e – adds an \u003cstrong\u003eNC positioner\u003c\/strong\u003e that drives the head to the programmed distance automatically, plus \u003cstrong\u003etwo horizontal pneumatic clamps\u003c\/strong\u003e not fitted to the other versions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Heads, One Cycle\u003c\/strong\u003e – both ends cut to a set length in a single operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 1\/2\" Cross Cut at 90°\u003c\/strong\u003e – a full inch more than the TR 2A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed Left Head, Traversing Right Head\u003c\/strong\u003e – one reference face stays put\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositive Locking at 90° and 45° Both Sides\u003c\/strong\u003e – manual locking on intermediate angles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9'2\" Maximum Between Saws\u003c\/strong\u003e – full-length stock in one pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 HP Motor Upgrade Available\u003c\/strong\u003e – a factory option on this model\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePneumatic Clamping and Centre Support Included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaw Blades Included\u003c\/strong\u003e – ships with blades fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e14\" (350 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e2 × 3 HP (4 HP available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. distance between saws\u003c\/td\u003e\n\u003ctd\u003e9'2\" (2,794 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. distance between saws\u003c\/td\u003e\n\u003ctd\u003e13 3\/16\" (335 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. distance between saws at 45°\u003c\/td\u003e\n\u003ctd\u003e18 1\/8\" (460 mm), or 9 7\/16\" (240 mm) with options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 90°\u003c\/td\u003e\n\u003ctd\u003e6 1\/2\" (165 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 45°\u003c\/td\u003e\n\u003ctd\u003e4 1\/2\" (114 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum depth of cut\u003c\/td\u003e\n\u003ctd\u003e4 1\/4\" (108 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBevel \/ compound cutting\u003c\/td\u003e\n\u003ctd\u003eNot available — see the TR 2B I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust chute\u003c\/td\u003e\n\u003ctd\u003e2 × 3 1\/8\" (2 × 79 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003eThree phase only — 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir supply\u003c\/td\u003e\n\u003ctd\u003eCompressed air required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. shipping weight\u003c\/td\u003e\n\u003ctd\u003e1,573 lbs (713 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e150\" × 39\" × 53\" (381 × 99 × 135 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA TR 2B in the version and voltage selected above\u003c\/li\u003e\n\u003cli\u003eSaw blades, fitted\u003c\/li\u003e\n\u003cli\u003eMagnetic starter with overload protection\u003c\/li\u003e\n\u003cli\u003eAir filter and regulator\u003c\/li\u003e\n\u003cli\u003eVertical pneumatic clamps and centre support\u003c\/li\u003e\n\u003cli\u003eNC version only: two additional horizontal pneumatic clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/mmQHUITNK70\" title=\"OMGA TR Series double mitre saws\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOMGA's TR Series overview — it covers the TR 2A, TR 2B and TR 2B I together, since all three share the same twin-head design.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eAt 1,573 lbs and 150\" crated, this machine ships by freight from OMGA in South Bend, Indiana. It is a full LTL lane and will need a forklift or a loading dock at delivery. Freight is quoted separately once we have your complete delivery address — we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"Standard \/ 230V Three Phase","offer_id":52560567042350,"sku":"901313-230","price":38949.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ 460V Three Phase","offer_id":52560567075118,"sku":"901313-460","price":38949.0,"currency_code":"USD","in_stock":true},{"title":"VIS — Digital Display \/ 230V Three Phase","offer_id":52560567107886,"sku":"901314-230","price":41559.0,"currency_code":"USD","in_stock":true},{"title":"VIS — Digital Display \/ 460V Three Phase","offer_id":52560567140654,"sku":"901314-460","price":41559.0,"currency_code":"USD","in_stock":true},{"title":"NC — Positioner \/ 230V Three Phase","offer_id":52560567173422,"sku":"931315-230","price":54090.0,"currency_code":"USD","in_stock":true},{"title":"NC — Positioner \/ 460V Three Phase","offer_id":52560567206190,"sku":"931315-460","price":54090.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/tr-2b.jpg?v=1788398963"},{"product_id":"omga-tr-2b-i-double-mitre-saw","title":"OMGA TR 2B I — 15\" Compound Twin-Head Double Mitre Saw, 2 × 4 HP","description":"\u003cp\u003eThe TR 2B I is the top of OMGA's double mitre line and the only one whose heads \u003cstrong\u003etilt\u003c\/strong\u003e. Everything else in the family mitres; this one mitres and bevels in the same cycle, on both ends of the piece at once. For anything that meets at a corner in two planes — angled frame work, splayed casework, architectural millwork — that is the difference between one operation and four.\u003c\/p\u003e\n\n\u003cp\u003eIt runs the largest blades in the family at 370 mm (roughly 15\") on two 4 HP motors, cutting 6 3\/4\" wide at 90° and a full 6 3\/4\" on a bevelled cross cut. Distance between the saws runs from 23 5\/8\" to 9'2\". The left head is fixed and the right traverses, with positive locking at 90° and 45° and manual locking in between.\u003c\/p\u003e\n\n\u003cp\u003eThis is a heavy machine at 1,753 lbs. If you do not need compound capability, the \u003ca href=\"\/products\/omga-tr-2b-double-mitre-saw\"\u003eTR 2B\u003c\/a\u003e gives you nearly the same cross cut for considerably less.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power and compressed air required.\u003c\/strong\u003e Available in 230V or 460V three phase only — there is no single-phase version. Clamping is pneumatic, so the machine needs a compressed air supply. Select your version and voltage above before ordering; the machine is built to the voltage you choose.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Version\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTR 2B I INT VIS\u003c\/strong\u003e – includes a \u003cstrong\u003edigital display\u003c\/strong\u003e of the distance between saw blades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTR 2B I INT NC\u003c\/strong\u003e – includes an \u003cstrong\u003eNC positioner\u003c\/strong\u003e that drives the head to the programmed distance automatically, plus \u003cstrong\u003etwo horizontal pneumatic clamps\u003c\/strong\u003e not fitted to the VIS version.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no hand-positioned version of this model — both builds come with length measurement as standard.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilting Heads for Compound Cuts\u003c\/strong\u003e – mitre and bevel together, both ends, one cycle. The only model in the family that does this\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 3\/4\" Bevelled Cross Cut\u003c\/strong\u003e – the same capacity bevelled as square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e370 mm Blades on 2 × 4 HP\u003c\/strong\u003e – the largest and most powerful in the line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9'2\" Maximum Between Saws\u003c\/strong\u003e – full-length architectural stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositive Locking at 90° and 45°\u003c\/strong\u003e – manual locking on intermediate angles\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePneumatic Clamping and Centre Support Included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaw Blades Included\u003c\/strong\u003e – ships with blades fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e370 mm (15\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e2 × 4 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. distance between saws\u003c\/td\u003e\n\u003ctd\u003e9'2\" (2,794 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. distance between saws\u003c\/td\u003e\n\u003ctd\u003e23 5\/8\" (600 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. distance between saws at 45°\u003c\/td\u003e\n\u003ctd\u003e23 5\/8\" (600 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 90°\u003c\/td\u003e\n\u003ctd\u003e6 3\/4\" (171 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 45°\u003c\/td\u003e\n\u003ctd\u003e4 1\/2\" (114 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum bevelled cross cut\u003c\/td\u003e\n\u003ctd\u003e6 3\/4\" (171 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum depth of cut\u003c\/td\u003e\n\u003ctd\u003e4 1\/4\" (108 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead tilt\u003c\/td\u003e\n\u003ctd\u003eYes — compound cutting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust chute\u003c\/td\u003e\n\u003ctd\u003e2 × 3 1\/8\" (2 × 79 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003eThree phase only — 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir supply\u003c\/td\u003e\n\u003ctd\u003eCompressed air required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. shipping weight\u003c\/td\u003e\n\u003ctd\u003e1,753 lbs (795 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e152\" × 45\" × 65\" (386 × 114 × 165 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA TR 2B I in the version and voltage selected above\u003c\/li\u003e\n\u003cli\u003eSaw blades, fitted\u003c\/li\u003e\n\u003cli\u003eMagnetic starter with overload protection\u003c\/li\u003e\n\u003cli\u003eAir filter and regulator\u003c\/li\u003e\n\u003cli\u003eVertical pneumatic clamps and centre support\u003c\/li\u003e\n\u003cli\u003eNC version only: two additional horizontal pneumatic clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/mmQHUITNK70\" title=\"OMGA TR Series double mitre saws\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOMGA's TR Series overview — it covers the TR 2A, TR 2B and TR 2B I together, since all three share the same twin-head design.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eAt 1,753 lbs and 152\" crated, this is the heaviest machine in the line and ships by freight from OMGA in South Bend, Indiana. It will need a forklift or a loading dock at delivery. Freight is quoted separately once we have your complete delivery address — we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"INT VIS — Digital Display \/ 230V Three Phase","offer_id":52560567501102,"sku":"901189-230","price":56806.0,"currency_code":"USD","in_stock":true},{"title":"INT VIS — Digital Display \/ 460V Three Phase","offer_id":52560567533870,"sku":"901189-460","price":56806.0,"currency_code":"USD","in_stock":true},{"title":"INT NC — Positioner \/ 230V Three Phase","offer_id":52560567566638,"sku":"931186-230","price":63837.0,"currency_code":"USD","in_stock":true},{"title":"INT NC — Positioner \/ 460V Three Phase","offer_id":52560567599406,"sku":"931186-460","price":63837.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/tr-2b-i-int-vis.jpg?v=1788399006"},{"product_id":"omga-ras-series-radial-arm-saw","title":"OMGA RAS Series Heavy-Duty Radial Arm Saw — RAS 900 \u0026 RAS 1250, 7.5 HP","description":"\u003cp\u003eThe RAS series is the largest radial arm saw OMGA builds — bigger tables, more reach and more power than the RADIAL series, on the same cast iron arm. Where the RADIAL 900\/7 gives you 35 1\/2\" of cross cut, the RAS 1250 gives you 44\", on a table nearly eight feet wide.\u003c\/p\u003e\n\n\u003cp\u003eLike the rest of the line, the head swivels and tilts on both the horizontal and vertical axes, so compound angles, edge work and rip cuts all come off one setup. Both models carry positive bevel stops from 0 to 45° and mitre stops at 45-0-45. The arbor turns at \u003cstrong\u003e3,400 RPM\u003c\/strong\u003e — faster than the RADIAL and RN series — driven by a 7.5 HP motor.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eRAS 900\u003c\/strong\u003e runs an 18\" blade, cutting 32 1\/4\" across and ripping 45\", on a 77\" × 50\" table. The \u003cstrong\u003eRAS 1250\u003c\/strong\u003e steps up to a 20\" blade, 44\" of cross cut and 56\" of rip on a 94\" × 62\" table, and takes a deeper cut at 6 3\/4\". Both are floor-standing machines that need real space around them.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power required.\u003c\/strong\u003e Available in 230V, 460V or 480V three phase — there is no single-phase version. Select your model and voltage above before ordering; the machine is built to the voltage you choose and it cannot be changed afterward. If your shop is on single-phase service you will need a phase converter to run one of these saws.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Iron Arm\u003c\/strong\u003e – the arm is what holds the cut square, and cast iron is why these do it over years rather than months\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.5 HP at 3,400 RPM\u003c\/strong\u003e – the most powerful and fastest-turning radial arm saw OMGA makes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 44\" Cross Cut, 56\" Rip\u003c\/strong\u003e – the RAS 1250 breaks down full sheet stock in one pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwivel and Tilt on Both Axes\u003c\/strong\u003e – compound angles and edge work without a second machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge Integrated Tables\u003c\/strong\u003e – 77\" × 50\" on the 900, 94\" × 62\" on the 1250, so stock is supported before and after the cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositive Stops\u003c\/strong\u003e – bevel 0–45°, mitre 45-0-45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e480V Option\u003c\/strong\u003e – this series is the only OMGA line offering 480V alongside 230V and 460V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eRAS 900\u003c\/th\u003e\n\u003cth\u003eRAS 1250\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e18\" (450 mm)\u003c\/td\u003e\n\u003ctd\u003e20\" (500 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e7.5 HP\u003c\/td\u003e\n\u003ctd\u003e7.5 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,400 RPM\u003c\/td\u003e\n\u003ctd\u003e3,400 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity\u003c\/td\u003e\n\u003ctd\u003e32 1\/4\" (819 mm)\u003c\/td\u003e\n\u003ctd\u003e44\" (1,118 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRipping capacity\u003c\/td\u003e\n\u003ctd\u003e45\" (1,143 mm)\u003c\/td\u003e\n\u003ctd\u003e56\" (1,422 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut at 90°\u003c\/td\u003e\n\u003ctd\u003e5 3\/4\" (146 mm)\u003c\/td\u003e\n\u003ctd\u003e6 3\/4\" (171 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut at 45°\u003c\/td\u003e\n\u003ctd\u003e4\" (102 mm)\u003c\/td\u003e\n\u003ctd\u003e4 3\/4\" (121 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBevel positive stops\u003c\/td\u003e\n\u003ctd\u003e0–45°\u003c\/td\u003e\n\u003ctd\u003e0–45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMitre positive stops\u003c\/td\u003e\n\u003ctd\u003e45-0-45\u003c\/td\u003e\n\u003ctd\u003e45-0-45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArm\u003c\/td\u003e\n\u003ctd\u003eCast iron\u003c\/td\u003e\n\u003ctd\u003eCast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable size\u003c\/td\u003e\n\u003ctd\u003e77\" × 50\" (196 × 127 cm)\u003c\/td\u003e\n\u003ctd\u003e94\" × 62\" (239 × 157 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall dimensions\u003c\/td\u003e\n\u003ctd\u003e77\" × 50\" (196 × 127 cm)\u003c\/td\u003e\n\u003ctd\u003e94\" × 62\" (239 × 157 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eThree phase only — 230V, 460V or 480V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e907 lbs (411 kg)\u003c\/td\u003e\n\u003ctd\u003e1,012 lbs (459 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e64\" × 30\" × 49\"\u003c\/td\u003e\n\u003ctd\u003e96\" × 30\" × 49\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA RAS radial arm saw in the model and voltage selected above\u003c\/li\u003e\n\u003cli\u003eMachine only. A saw blade is not listed as included — contact us before you order if you need one supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/86KLolDBDSM\" title=\"OMGA RADIAL 900\/7 radial arm saw\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOMGA have not filmed the RAS series on its own. The video shows the \u003ca href=\"\/products\/omga-radial-series-radial-arm-saw\"\u003eRADIAL 900\/7\u003c\/a\u003e — the same cast iron arm and eight-bearing carriage, one size down. The RAS runs a bigger blade, a bigger table and a faster arbor, but the machine works the same way.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eAt 907 to 1,012 lbs, and 96\" crated on the RAS 1250, these ship by freight from OMGA in South Bend, Indiana and need a forklift or a loading dock at delivery. Freight is quoted separately once we have your complete delivery address — we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"RAS 900 — 18\", 32 1\/4\" Cross Cut \/ 230V Three Phase","offer_id":52560594534702,"sku":"OMGA-RAS900-230","price":15591.0,"currency_code":"USD","in_stock":true},{"title":"RAS 900 — 18\", 32 1\/4\" Cross Cut \/ 460V Three Phase","offer_id":52560594567470,"sku":"OMGA-RAS900-460","price":15591.0,"currency_code":"USD","in_stock":true},{"title":"RAS 900 — 18\", 32 1\/4\" Cross Cut \/ 480V Three Phase","offer_id":52560594600238,"sku":"OMGA-RAS900-480","price":15591.0,"currency_code":"USD","in_stock":true},{"title":"RAS 1250 — 20\", 44\" Cross Cut \/ 230V Three Phase","offer_id":52560594633006,"sku":"OMGA-RAS1250-230","price":17605.0,"currency_code":"USD","in_stock":true},{"title":"RAS 1250 — 20\", 44\" Cross Cut \/ 460V Three Phase","offer_id":52560594665774,"sku":"OMGA-RAS1250-460","price":17605.0,"currency_code":"USD","in_stock":true},{"title":"RAS 1250 — 20\", 44\" Cross Cut \/ 480V Three Phase","offer_id":52560594698542,"sku":"OMGA-RAS1250-480","price":17605.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/radial-1250-7_ec5b83ae-f35c-4d92-874a-726b14d84b44.jpg?v=1788399932"},{"product_id":"omga-stop-nc-positioner","title":"OMGA Stop — NC Programmable Length Positioner, 6' to 22' Traverse","description":"\u003cp\u003eThe OMGA Stop is a numerically controlled length positioner that \u003cstrong\u003eretrofits onto machines you already own\u003c\/strong\u003e. It is not a saw. It is the fence stop that drives itself to the next programmed length, so the operator loads, cuts, and the stop has already moved before they look up.\u003c\/p\u003e\n\n\u003cp\u003eIt works with up-cut saws, radial arm saws, table saws, drills, mitre saws and double mitre saws. If you are running a cut list by hand with a tape and a clamp-on stop, this is the piece that turns that station into a production cell — and it does it without replacing the machine.\u003c\/p\u003e\n\n\u003cp\u003eA brushless motor drives the carriage at up to 200 feet per minute along a precision linear encoder, holding position to \u003cstrong\u003e±0.004\"\u003c\/strong\u003e. The controller stores up to 500 programs and ships with three software packages: Pusher Basic, Advanced Pusher and Picture Frame. Connectivity is unusually generous for shop equipment — two USB, two RS232 and an RJ45 Ethernet port, so cut lists can come off a network or a memory stick rather than being keyed in.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThis is the one OMGA machine that does not need three-phase power.\u003c\/strong\u003e It runs on \u003cstrong\u003e110V or 220V single phase\u003c\/strong\u003e, which means almost any shop can take one regardless of service.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing a Size and Hand\u003c\/h3\u003e\n\u003cp\u003eThe number is the \u003cstrong\u003euseable traverse in feet\u003c\/strong\u003e — the longest piece the stop can position. Choose the hand by which side of your machine the infeed runs: the stop mounts to the left or the right of the cutting head, and they are not interchangeable. If you are unsure, send us a photo of your setup and we will confirm before ordering.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eUseable traverse\u003c\/th\u003e\n\u003cth\u003eTypical use\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOMGA Stop 6\u003c\/td\u003e\n\u003ctd\u003e6'\u003c\/td\u003e\n\u003ctd\u003eShort parts, frame stock, small shop footprint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOMGA Stop 10\u003c\/td\u003e\n\u003ctd\u003e10'\u003c\/td\u003e\n\u003ctd\u003eGeneral cabinet and millwork lengths\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOMGA Stop 13\u003c\/td\u003e\n\u003ctd\u003e13'\u003c\/td\u003e\n\u003ctd\u003eLong millwork and trim runs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOMGA Stop 16\u003c\/td\u003e\n\u003ctd\u003e16'\u003c\/td\u003e\n\u003ctd\u003eFull-length stock without repositioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOMGA Stop 22\u003c\/td\u003e\n\u003ctd\u003e22'\u003c\/td\u003e\n\u003ctd\u003eTimber, architectural and structural lengths\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetrofits Existing Machines\u003c\/strong\u003e – up-cut, radial arm, table, mitre and double mitre saws, and drills. Your saw stays; the stop does the measuring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e±0.004\" Positioning Accuracy\u003c\/strong\u003e – on a precision linear encoder, not a counted belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 FPM Traverse\u003c\/strong\u003e – the stop is in position before the operator is ready for the next cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 Programs Stored\u003c\/strong\u003e – recurring cut lists get recalled, not re-entered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Software Packages Included\u003c\/strong\u003e – Pusher Basic, Advanced Pusher and Picture Frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB and Ethernet\u003c\/strong\u003e – 2 × USB, 2 × RS232, 1 × RJ45, so cut lists load from a network or a stick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Phase\u003c\/strong\u003e – 110V or 220V, unlike every other OMGA machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrushless Motor\u003c\/strong\u003e – 0.66 kW (0.9 HP), no brushes to service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUseable traverse\u003c\/td\u003e\n\u003ctd\u003e6', 10', 13', 16' or 22' depending on model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003eBrushless, 0.66 kW (0.9 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum traversing speed\u003c\/td\u003e\n\u003ctd\u003e200 FPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePositioning accuracy\u003c\/td\u003e\n\u003ctd\u003e± 0.004\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasuring system\u003c\/td\u003e\n\u003ctd\u003ePrecision linear encoder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware included\u003c\/td\u003e\n\u003ctd\u003ePusher Basic, Advanced Pusher, Picture Frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum programs\u003c\/td\u003e\n\u003ctd\u003e500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection ports\u003c\/td\u003e\n\u003ctd\u003e2 × USB, 2 × RS232, 1 × RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemovable media\u003c\/td\u003e\n\u003ctd\u003eUSB port, Ethernet port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003e110V or 220V \u003cstrong\u003esingle phase\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHand\u003c\/td\u003e\n\u003ctd\u003eRight hand or left hand — not interchangeable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA Stop in the traverse length and hand selected above\u003c\/li\u003e\n\u003cli\u003ePrecision linear encoder system\u003c\/li\u003e\n\u003cli\u003ePusher Basic, Advanced Pusher and Picture Frame software\u003c\/li\u003e\n\u003cli\u003eMounting brackets and the table\/legs stand are \u003cstrong\u003eseparate\u003c\/strong\u003e — see below\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Also Need\u003c\/h3\u003e\n\u003cp\u003eThe Stop on its own is a carriage and a controller. To put it to work you need three things: a \u003cstrong\u003etable\u003c\/strong\u003e for it to travel on, a \u003cstrong\u003ebracket\u003c\/strong\u003e that ties that table to your machine, and a \u003cstrong\u003elink kit\u003c\/strong\u003e that wires the two together safely.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/omga-stop-table-and-legs\"\u003eTable and Legs\u003c\/a\u003e — 6', 10', 13', 16' or 22'. \u003cstrong\u003eMatch it to your Stop's length.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/omga-stop-basic-bracket\"\u003eBasic Bracket with Shock Absorber\u003c\/a\u003e — the pusher head that touches your workpiece. Right or left hand\u003c\/li\u003e\n\u003cli\u003eThen \u003cstrong\u003eone\u003c\/strong\u003e machine bracket: \u003ca href=\"\/products\/omga-stop-bracket-mitre-saw\"\u003efor mitre chop saws\u003c\/a\u003e · \u003ca href=\"\/products\/omga-stop-bracket-radial-arm-saw\"\u003efor radial arm saws\u003c\/a\u003e · \u003ca href=\"\/products\/omga-stop-bracket-v-235\"\u003e45° bracket for the V 235\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/omga-stop-safety-link-kit\"\u003eSafety \u0026amp; Link Kit\u003c\/a\u003e — mitre, up-cut or generic. 🔑 The V 235 bracket already includes one\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional Extras\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/omga-stop-tail-clamp\"\u003eTail Clamp Attachment\u003c\/a\u003e — vertical or horizontal, holds the far end of long stock\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/omga-stop-bar-code-reader\"\u003eBar Code Reader\u003c\/a\u003e — scan a work order straight into the controller\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/omga-stop-label-printer\"\u003eLabel Printer\u003c\/a\u003e — peel-off part labels at the saw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure which bracket or kit your machine takes? Tell us the machine and we will confirm it with OMGA before anything ships. Ordering everything together also puts it all on one freight quote, which is far cheaper than shipping small parts separately.\u003c\/p\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/OGpT9SRjRAE\" title=\"OMGA Stop NC programmable length positioner\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eThese are long items — a 22' unit is exactly that — and ship by freight from OMGA in South Bend, Indiana. Freight is quoted separately once we have your complete delivery address, and we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"6' — Stop 6 \/ Right Hand","offer_id":52560594960686,"sku":"OMGA-STOP6-RH","price":9348.0,"currency_code":"USD","in_stock":true},{"title":"6' — Stop 6 \/ Left Hand","offer_id":52560594993454,"sku":"OMGA-STOP6-LH","price":9348.0,"currency_code":"USD","in_stock":true},{"title":"10' — Stop 10 \/ Right Hand","offer_id":52560595026222,"sku":"OMGA-STOP10-RH","price":9571.0,"currency_code":"USD","in_stock":true},{"title":"10' — Stop 10 \/ Left Hand","offer_id":52560595058990,"sku":"OMGA-STOP10-LH","price":9571.0,"currency_code":"USD","in_stock":true},{"title":"13' — Stop 13 \/ Right Hand","offer_id":52560595091758,"sku":"OMGA-STOP13-RH","price":10067.0,"currency_code":"USD","in_stock":true},{"title":"13' — Stop 13 \/ Left Hand","offer_id":52560595124526,"sku":"OMGA-STOP13-LH","price":10067.0,"currency_code":"USD","in_stock":true},{"title":"16' — Stop 16 \/ Right Hand","offer_id":52560595157294,"sku":"OMGA-STOP16-RH","price":15848.0,"currency_code":"USD","in_stock":true},{"title":"16' — Stop 16 \/ Left Hand","offer_id":52560595190062,"sku":"OMGA-STOP16-LH","price":15848.0,"currency_code":"USD","in_stock":true},{"title":"22' — Stop 22 \/ Right Hand","offer_id":52560595222830,"sku":"OMGA-STOP22-RH","price":17637.0,"currency_code":"USD","in_stock":true},{"title":"22' — Stop 22 \/ Left Hand","offer_id":52560595255598,"sku":"OMGA-STOP22-LH","price":17637.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/omga-stop-22-rh.jpg?v=1788400012"},{"product_id":"omga-v-235-vertical-double-mitre-saw","title":"OMGA V 235 — Vertical Double Mitre Saw for V-Cutting \u0026 Picture Frames","description":"\u003cp\u003eThe V 235 is OMGA's vertical double mitre saw, built specifically for \u003cstrong\u003eV-cutting and picture frame work\u003c\/strong\u003e. The blades come up from below through the moulding, which is what lets it cut a clean mitre on delicate profiles without the tear-out a horizontal saw leaves on the exit side.\u003c\/p\u003e\n\n\u003cp\u003eOMGA describe it as the result of thirty years in this field, and it carries their patented \u003cstrong\u003eProfilBlock clamping system\u003c\/strong\u003e — the mechanism that holds a shaped moulding by its profile rather than crushing it against a flat fence. On gilded, veneered or fine hardwood frame stock, that is the difference between a saleable frame and firewood.\u003c\/p\u003e\n\n\u003cp\u003eTwo 350 mm blades run at 3,200 RPM from a pair of 2 HP motors, cutting up to 3 9\/16\" wide and 3\" high with mitre stops at 45°. It is a compact machine at 59\" × 30\" × 63\", so it fits a framing shop rather than demanding a mill floor.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power required.\u003c\/strong\u003e Available in 208V, 230V or 460V three phase only — there is no single-phase version. Select your voltage above before ordering; the machine is built to the voltage you choose and it cannot be changed afterward.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Cutting Action\u003c\/strong\u003e – blades rise through the moulding, so the visible face is cut cleanly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfilBlock Clamping\u003c\/strong\u003e – OMGA's patented system holds shaped profiles by their form, not by crushing them flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-Built for Frames\u003c\/strong\u003e – V-cutting and picture framing is what this machine is for, not a compromise setting on a general saw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 350 mm Blades at 3,200 RPM\u003c\/strong\u003e – both mitres cut in one cycle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Footprint\u003c\/strong\u003e – 59\" × 30\" × 63\", sized for a framing shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThirty Years of Development\u003c\/strong\u003e – the current generation of a machine OMGA has refined since the 1990s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e350 mm (14\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e2 × 2 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cutting width\u003c\/td\u003e\n\u003ctd\u003e3 9\/16\" (90 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cutting height\u003c\/td\u003e\n\u003ctd\u003e3\" (76 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMitre positioning stops\u003c\/td\u003e\n\u003ctd\u003e45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatic mitre positioning\u003c\/td\u003e\n\u003ctd\u003eNot available — see the V 235 NC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamping\u003c\/td\u003e\n\u003ctd\u003eProfilBlock system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust chute\u003c\/td\u003e\n\u003ctd\u003e2 × 3\" (2 × 76 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall dimensions\u003c\/td\u003e\n\u003ctd\u003e59\" × 30\" × 63\" (150 × 76 × 160 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e62\" × 35\" × 67\" (157 × 89 × 170 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003eThree phase only — 208V, 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA V 235 vertical double mitre saw, built to the voltage selected above\u003c\/li\u003e\n\u003cli\u003eProfilBlock clamping system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/rwTFOHKemmw\" title=\"OMGA V 235 vertical double mitre saw\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eShips by freight from OMGA in South Bend, Indiana, crated at 62\" × 35\" × 67\". Freight is quoted separately once we have your complete delivery address — we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"208V Three Phase","offer_id":52560596140334,"sku":"OMGA-V235-208","price":22019.0,"currency_code":"USD","in_stock":true},{"title":"230V Three Phase","offer_id":52560596173102,"sku":"OMGA-V235-230","price":22019.0,"currency_code":"USD","in_stock":true},{"title":"460V Three Phase","offer_id":52560596205870,"sku":"OMGA-V235-460","price":22019.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/v-235.jpg?v=1788400093"}],"url":"https:\/\/www.fullforceequipment.com\/collections\/omga-machines.oembed","provider":"FullForce Equipment","version":"1.0","type":"link"}