{"title":"Shears \u0026 Notchers","description":"\u003cp\u003eHydraulic shears, foot shears, throatless and pneumatic shears, and corner notchers for cutting sheet and plate to size.\u003c\/p\u003e","products":[{"product_id":"baileigh-sn-f11-an-pneumatic-corner-notcher-11-gauge-mild-steel-5-x-5-in-notch","title":"Baileigh SN-F11-AN Pneumatic Corner Notcher, 11 Gauge Mild Steel, 5 x 5 In. Notch","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e11\u003ci\u003ega.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003ePneumatic Corner Notcher\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMax Notch\u003c\/span\u003e\u003cb\u003e5 x 5 in.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eAir\u003c\/span\u003e\u003cb\u003e115 psi \/ 4.4 CFM\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SN-F11-AN Pneumatic Corner Notcher, 11 Gauge Mild Steel, 5 x 5 In. Notch\u003c\/h2\u003e\n\u003cp\u003eThe SN-F11-AN is an air-operated corner notcher that cuts fixed 90-degree notches in sheet metal. It is rated for 11 ga. (0.118 in.) mild steel and 15 ga. (0.067 in.) stainless steel, with a maximum notch of 5 x 5 in.\u003c\/p\u003e\n\u003cp\u003eIt runs on shop compressed air at a 115 psi working pressure and a 4.4 CFM maximum flow rate, so it needs no electrical service for the notching action. The rated speed is 50 strokes per minute, and the work table measures 18 x 23.5 in.\u003c\/p\u003e\n\u003ch4\u003eFoot Pedal Control\u003c\/h4\u003e\n\u003cp\u003eA foot control pedal starts each notching cycle, leaving both hands free to position the sheet.\u003c\/p\u003e\n\u003ch4\u003eProduction Table With Squares\u003c\/h4\u003e\n\u003cp\u003eThe 18 x 23.5 in. table carries left and right squares for repeatable notch placement on production runs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/BA9-1007236_IMG_DET1.jpg?v=1793125833\u0026amp;width=1200\" alt=\"Baileigh SN-F11-AN pneumatic corner notcher detail 1\" loading=\"lazy\" width=\"1200\" height=\"1200\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e11 ga. mild steel\u003c\/b\u003e\u003cspan\u003e15 ga. stainless steel capacity\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e90-degree fixed notch\u003c\/b\u003e\u003cspan\u003eUp to 5 x 5 in. notch size\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir powered\u003c\/b\u003e\u003cspan\u003e115 psi working pressure, 4.4 CFM max flow\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e50 strokes per minute\u003c\/b\u003e\u003cspan\u003eRated cycle speed\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e18 x 23.5 in. table\u003c\/b\u003e\u003cspan\u003eLeft and right squares for setup\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFoot control pedal\u003c\/b\u003e\u003cspan\u003eHands-free cycle start\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManual blade gap adjustment\u003c\/b\u003e\u003cspan\u003eSet the clearance for the material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir control unit included\u003c\/b\u003e\u003cspan\u003eMachine ships complete on its stand\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eCorner notcher specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSN-F11-AN \/ BA9-1007236\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003ePneumatic (compressed air), 115 psi working pressure; never connect to an air source that can exceed 120 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Air Flow\u003c\/td\u003e\n\u003ctd\u003e4.4 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir Hose\u003c\/td\u003e\n\u003ctd\u003e3\/8 in. I.D. minimum with quick-connect coupler, 10 ft. maximum length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Thickness, Mild Steel\u003c\/td\u003e\n\u003ctd\u003e11 ga. (0.118 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Thickness, Stainless Steel\u003c\/td\u003e\n\u003ctd\u003e15 ga. (0.067 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Notch Size\u003c\/td\u003e\n\u003ctd\u003e5 x 5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotch Angle\u003c\/td\u003e\n\u003ctd\u003e90 degrees (fixed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Gap Adjustment\u003c\/td\u003e\n\u003ctd\u003eManual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per Minute\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable Size\u003c\/td\u003e\n\u003ctd\u003e18 x 23.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e500 lb.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e60 x 44 x 68 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eMachine on stand with air control unit, cutters, table, left and right squares, safety cover, hoses, foot control pedal, 5 mm Allen wrench\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003ctd\u003eScrap collecting box; stainless steel cutters are optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325414738\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/7f8dd375b4908802\/original\/SN-F11-AN-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SN-F11-AN Corner Notcher Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec ffx-vid\"\u003e\n\u003ch3\u003eSee it in action\u003c\/h3\u003e\n\u003cdiv class=\"ffx-vids\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/YWvVy5_XyI8\" title=\"Baileigh Industrial SN-F11AN Pneumatic Sheet Metal Corner Notcher\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen loading=\"lazy\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003eBaileigh video: Baileigh Industrial SN-F11AN Pneumatic Sheet Metal Corner Notcher.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh corner notcher questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SN-F11-AN need?\u003c\/summary\u003e\u003cp\u003eIt is air operated. The manual lists a 115 psi working pressure and 4.4 CFM maximum flow, and warns never to connect it to an air source that can exceed 120 psi. Use a clean, water-free supply through a hose of at least 3\/8 in. I.D.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow thick a sheet can it notch?\u003c\/summary\u003e\u003cp\u003eUp to 11 ga. (0.118 in.) mild steel or 15 ga. (0.067 in.) stainless steel, with a maximum notch of 5 x 5 in. at a fixed 90 degrees.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it notch stainless steel?\u003c\/summary\u003e\u003cp\u003eYes, up to 15 ga. Baileigh also lists optional stainless steel cutters for this model.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs a scrap box included?\u003c\/summary\u003e\u003cp\u003eNo. The manual lists the scrap collecting box as not included.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67854293500206,"sku":"BA9-1007236","price":5994.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/BA9-1007236_IMG_MAIN.jpg?v=1793125833"},{"product_id":"baileigh-sn-f09-ms-hydraulic-corner-notcher-9-gauge-mild-steel-3-hp-220v-3ph","title":"Baileigh SN-F09-MS Hydraulic Corner Notcher, 9 Gauge Mild Steel, 3 HP 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e9\u003ci\u003ega.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Corner Notcher\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMax Notch\u003c\/span\u003e\u003cb\u003e7-3\/4 x 7-3\/4 in.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMotor\u003c\/span\u003e\u003cb\u003e3 HP, 220V 3-Phase\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SN-F09-MS Hydraulic Corner Notcher, 9 Gauge Mild Steel, 3 HP 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe SN-F09-MS is a hydraulic corner notcher that cuts fixed 90-degree notches in sheet metal. It is rated for 9 ga. (0.1495 in.) mild steel and 13 ga. (0.0937 in.) stainless steel, with a maximum notch of 7-3\/4 x 7-3\/4 in.\u003c\/p\u003e\n\u003cp\u003eA 3 HP motor drives the hydraulic system on 220V, 60 Hz, three-phase power. The machine is rated at 50 strokes per minute and has a 27 x 23.5 in. work table.\u003c\/p\u003e\n\u003ch4\u003eFoot Pedal Operation\u003c\/h4\u003e\n\u003cp\u003eThe notching cycle is started from a foot pedal, so the operator can hold and guide the sheet with both hands.\u003c\/p\u003e\n\u003ch4\u003eResharpenable Blades\u003c\/h4\u003e\n\u003cp\u003eBaileigh states the 7-3\/4 in. blades can be resharpened, and blade gap is set manually for the material.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/1007231__sn_f09ms_web2_jpg.jpg?v=1793125909\u0026amp;width=1200\" alt=\"Baileigh SN-F09-MS hydraulic corner notcher view 1\" loading=\"lazy\" width=\"1200\" height=\"1200\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e9 ga. mild steel\u003c\/b\u003e\u003cspan\u003e13 ga. stainless steel capacity\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e90-degree fixed notch\u003c\/b\u003e\u003cspan\u003eUp to 7-3\/4 x 7-3\/4 in.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e3 HP hydraulic drive\u003c\/b\u003e\u003cspan\u003e220V, 60 Hz, 3-phase\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e50 strokes per minute\u003c\/b\u003e\u003cspan\u003eRated cycle speed\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e27 x 23.5 in. table\u003c\/b\u003e\u003cspan\u003eGuides for material positioning\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFoot pedal control\u003c\/b\u003e\u003cspan\u003eHands-free cycle start\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManual blade gap adjustment\u003c\/b\u003e\u003cspan\u003eSet clearance to the material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShips complete\u003c\/b\u003e\u003cspan\u003eIn one crate\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eCorner notcher specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSN-F09-MS \/ BA9-1007231\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e3 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e220V, 60 Hz, 3-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Thickness, Mild Steel\u003c\/td\u003e\n\u003ctd\u003e9 ga. (0.1495 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Thickness, Stainless Steel\u003c\/td\u003e\n\u003ctd\u003e13 ga. (0.0937 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Notch Size\u003c\/td\u003e\n\u003ctd\u003e7-3\/4 x 7-3\/4 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotch Angle\u003c\/td\u003e\n\u003ctd\u003e90 degrees (fixed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Gap Adjustment\u003c\/td\u003e\n\u003ctd\u003eManual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per Minute\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable Size\u003c\/td\u003e\n\u003ctd\u003e27 x 23.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic Reservoir\u003c\/td\u003e\n\u003ctd\u003eAbout 20 liters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e905 lb.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1,100 lb.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e60 x 44 x 68 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eComplete machine, shipped in one crate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325414707\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/73c527dbb8514660\/original\/SN-F09-MS-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SN-F09-MS Corner Notcher Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec ffx-vid\"\u003e\n\u003ch3\u003eSee it in action\u003c\/h3\u003e\n\u003cdiv class=\"ffx-vids\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/MSbt8AZXJDc\" title=\"Sheet Metal Notcher SN-F09-MS\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen loading=\"lazy\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003eBaileigh video: Sheet Metal Notcher SN-F09-MS.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh corner notcher questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SN-F09-MS need?\u003c\/summary\u003e\u003cp\u003eThe manual lists 220V, 60 Hz, three-phase power for the 3 HP motor. Have the machine wired by a qualified electrician to a properly grounded supply.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow thick a sheet can it notch?\u003c\/summary\u003e\u003cp\u003eUp to 9 ga. (0.1495 in.) mild steel or 13 ga. (0.0937 in.) stainless steel, with a maximum notch of 7-3\/4 x 7-3\/4 in. at a fixed 90 degrees.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat hydraulic oil does it use?\u003c\/summary\u003e\u003cp\u003eThe manual calls for about 20 liters of hydraulic oil, filled to about 4\/5 of the oil indicator: MOBILE-25, AGIP-46, SHELL-46, ESSO-46 or TOTAL-46, or an equivalent.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67854319124782,"sku":"BA9-1007231","price":13639.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/1007231__sn_f09ms_web2_jpg.jpg?v=1793125909"},{"product_id":"baileigh-sn-f04-ms-hydraulic-corner-notcher-4-gauge-6-mm-capacity-4-hp-220v-3ph","title":"Baileigh SN-F04-MS Hydraulic Corner Notcher, 4 Gauge (6 mm) Capacity, 4 HP 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e6\u003ci\u003emm\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Corner Notcher\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMax Notch\u003c\/span\u003e\u003cb\u003e8-1\/2 x 8-1\/2 in.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMotor\u003c\/span\u003e\u003cb\u003e4 HP, 220V 3-Phase\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SN-F04-MS Hydraulic Corner Notcher, 4 Gauge (6 mm) Capacity, 4 HP 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe SN-F04-MS is a hydraulic corner notcher for fixed 90-degree notches in heavy sheet and plate. Its maximum capacity is 6 mm (0.237 in.), listed by Baileigh as 4 ga. mild steel, and it cuts notches up to 8-1\/2 x 8-1\/2 in.\u003c\/p\u003e\n\u003cp\u003eA 4 HP motor powers the hydraulic system on 220V, three-phase, 60 Hz service. The machine is rated at 15 strokes per minute and has a 25.5 x 25.5 in. work table.\u003c\/p\u003e\n\u003ch4\u003eFoot Pedal Control\u003c\/h4\u003e\n\u003cp\u003eEach notching stroke is triggered from a foot pedal, keeping the operator's hands on the workpiece.\u003c\/p\u003e\n\u003ch4\u003ePlug or Hard-Wire Installation\u003c\/h4\u003e\n\u003cp\u003eThe manual allows either a UL\/CSA listed 3-pole, 4-wire grounding plug rated for 220V or hard-wiring to a panel with a disconnect switch.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/BA9-1007213_IMG_MAIN.png?v=1793125969\u0026amp;width=1200\" alt=\"Baileigh SN-F04-MS hydraulic corner notcher main view\" loading=\"lazy\" width=\"1200\" height=\"1089\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e6 mm (0.237 in.) capacity\u003c\/b\u003e\u003cspan\u003e4 ga. mild steel\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e90-degree fixed notch\u003c\/b\u003e\u003cspan\u003eUp to 8-1\/2 x 8-1\/2 in.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e8-1\/2 in. blades\u003c\/b\u003e\u003cspan\u003eFixed at 90 degrees\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e4 HP hydraulic drive\u003c\/b\u003e\u003cspan\u003e220V, 3-phase, 60 Hz\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e15 strokes per minute\u003c\/b\u003e\u003cspan\u003eRated cycle speed\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e25.5 x 25.5 in. table\u003c\/b\u003e\u003cspan\u003eGuides for material placement\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFoot pedal control\u003c\/b\u003e\u003cspan\u003eHands-free stroke\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e5.3 gal. hydraulic tank\u003c\/b\u003e\u003cspan\u003eShips without oil\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eCorner notcher specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSN-F04-MS \/ BA9-1007213\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e4 HP (2.98 kW)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e220V, 3-phase, 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Capacity\u003c\/td\u003e\n\u003ctd\u003e6 mm (0.237 in.); 4 ga. mild steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Notch Size\u003c\/td\u003e\n\u003ctd\u003e8-1\/2 x 8-1\/2 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotch Angle\u003c\/td\u003e\n\u003ctd\u003e90 degrees (fixed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Length\u003c\/td\u003e\n\u003ctd\u003e8-1\/2 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Gap Adjustment\u003c\/td\u003e\n\u003ctd\u003eManual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per Minute\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable Size\u003c\/td\u003e\n\u003ctd\u003e25.5 x 25.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic Tank\u003c\/td\u003e\n\u003ctd\u003e5.3 gal. (20 liters), #32 or #64 hydraulic oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1,200 lb.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e60 x 44 x 68 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eComplete machine, shipped in one crate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003ctd\u003eHydraulic oil (machine is supplied without oil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325414530\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/6ff5b4a4ced2787\/original\/SN-F04-MS-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SN-F04-MS Corner Notcher Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh corner notcher questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SN-F04-MS need?\u003c\/summary\u003e\u003cp\u003e220V, three-phase, 60 Hz. It can be fitted with a UL\/CSA listed 3-pole, 4-wire grounding plug rated for 220V, or hard-wired to a panel with a disconnect switch. Protect the circuit with a time-delay fuse or breaker rated slightly above the machine's full load current.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it come with hydraulic oil?\u003c\/summary\u003e\u003cp\u003eNo. The manual states the machine is supplied without oil. The tank holds 5.3 gal. (20 liters) of #32 or #64 hydraulic oil.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow large a notch can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 8-1\/2 x 8-1\/2 in. at a fixed 90 degrees, in material up to 6 mm (0.237 in.).\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67854348845358,"sku":"BA9-1007213","price":13804.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/BA9-1007213_IMG_MAIN.png?v=1793125969"},{"product_id":"baileigh-sn-v04-ms-variable-angle-hydraulic-notcher-6-mm-capacity-30-140-degree-4-hp-220v-3ph","title":"Baileigh SN-V04-MS Variable-Angle Hydraulic Notcher, 6 mm Capacity, 30-140 Degree, 4 HP 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e30-140\u003ci\u003edeg.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eVariable-Angle Hydraulic Notcher\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e6 mm (0.237 in.)\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMotor\u003c\/span\u003e\u003cb\u003e4 HP, 220V 3-Phase\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SN-V04-MS Variable-Angle Hydraulic Notcher, 6 mm Capacity, 30-140 Degree, 4 HP 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe SN-V04-MS is a hydraulic sheet metal notcher with a blade angle that adjusts anywhere from 30 to 140 degrees. It notches mild steel up to 6 mm (0.237 in.) and cuts notches as large as 8-1\/2 x 8-1\/2 in.\u003c\/p\u003e\n\u003cp\u003eA 4 HP motor drives the hydraulics on 220V, three-phase power. It is rated at 15 strokes per minute, works on a 27 x 23.5 in. table, and uses manual blade gap adjustment.\u003c\/p\u003e\n\u003ch4\u003eHandwheel Angle Adjustment\u003c\/h4\u003e\n\u003cp\u003eThe notch angle is set by handwheel, and the table carries guides and miter blocks for positioning the sheet.\u003c\/p\u003e\n\u003ch4\u003eBlade Choice Sets Thickness\u003c\/h4\u003e\n\u003cp\u003eThe manual rates 6 mm cutting with the 30-degree blade and 3 mm with the 15-degree blade.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/1007269__snv04ms_notcher_png.png?v=1793126028\u0026amp;width=1200\" alt=\"Baileigh SN-V04-MS variable-angle hydraulic notcher main view\" loading=\"lazy\" width=\"1200\" height=\"1400\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e30 to 140 degree notches\u003c\/b\u003e\u003cspan\u003eVariable blade angle\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e6 mm (0.237 in.) mild steel\u003c\/b\u003e\u003cspan\u003eWith the 30-degree blade\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e8-1\/2 x 8-1\/2 in. max notch\u003c\/b\u003e\u003cspan\u003e8-1\/2 in. blades with negative rake\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e4 HP hydraulic drive\u003c\/b\u003e\u003cspan\u003e220V, 3-phase\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e15 strokes per minute\u003c\/b\u003e\u003cspan\u003eRated cycle speed\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e27 x 23.5 in. table\u003c\/b\u003e\u003cspan\u003eGuides and miter blocks\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFoot pedal stroke\u003c\/b\u003e\u003cspan\u003eHandwheel angle setting\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManual blade gap adjustment\u003c\/b\u003e\u003cspan\u003eSet clearance to the material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eNotcher specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSN-V04-MS \/ BA9-1007269\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e4 HP (3 kW)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e220V, 3-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Capacity, Mild Steel\u003c\/td\u003e\n\u003ctd\u003e6 mm (0.237 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Cutting Thickness by Blade\u003c\/td\u003e\n\u003ctd\u003e6 mm with 30-degree blade; 3 mm with 15-degree blade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Notch Size\u003c\/td\u003e\n\u003ctd\u003e8-1\/2 x 8-1\/2 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotch Angle\u003c\/td\u003e\n\u003ctd\u003e30 to 140 degrees, variable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Length\u003c\/td\u003e\n\u003ctd\u003e8-1\/2 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Gap Adjustment\u003c\/td\u003e\n\u003ctd\u003eManual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per Minute\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable Size\u003c\/td\u003e\n\u003ctd\u003e27 x 23.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1,100 lb.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e60 x 44 x 68 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eComplete machine, shipped in one crate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003ctd\u003eSpecial-made blades are required for cutting stainless steel at 2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325415018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/612acf2e69830b31\/original\/SN-V04-MS-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SN-V04-MS Notcher Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh notcher questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SN-V04-MS need?\u003c\/summary\u003e\u003cp\u003e220V, three-phase. The manual calls for a UL\/CSA listed 3-pole, 4-wire grounding plug or hard-wiring through a disconnect, installed by a qualified electrician.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat angles can it notch?\u003c\/summary\u003e\u003cp\u003eAny angle from 30 to 140 degrees, set by handwheel.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow thick can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 6 mm (0.237 in.) mild steel with the 30-degree blade, or 3 mm with the 15-degree blade. Cutting stainless steel at 2 mm requires special-made blades.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat hydraulic oil does it use?\u003c\/summary\u003e\u003cp\u003eThe manual lists MOBILE-25, AGIP-46, SHELL-46, ESSO-46 or TOTAL-46, or an equivalent hydraulic oil. Fill the reservoir to about 4\/5 on the indicator before first use.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67854377025838,"sku":"BA9-1007269","price":25189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/1007269__snv04ms_notcher_png.png?v=1793126028"},{"product_id":"baileigh-sn-f16-fn-foot-operated-corner-notcher-16-ga-mild-steel-3-1-x-3-1-in-notch","title":"Baileigh SN-F16-FN Foot-Operated Corner Notcher, 16 Ga. Mild Steel, 3.1 x 3.1 in. Notch","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e16\u003ci\u003ega. mild steel\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eFoot-Operated Corner Notcher\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eNotch\u003c\/span\u003e\u003cb\u003e3.1 x 3.1 in. x 90°\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eShear Force\u003c\/span\u003e\u003cb\u003e4 tons\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SN-F16-FN Foot-Operated Corner Notcher, 16 Ga. Mild Steel, 3.1 x 3.1 in. Notch\u003c\/h2\u003e\n\u003cp\u003eThe SN-F16-FN is a floor-standing corner notcher worked by a foot pedal, so no power hookup is needed. It cuts 90-degree corner notches up to 3.1 x 3.1 in. in mild steel up to 16 gauge.\u003c\/p\u003e\n\u003cp\u003eIt delivers 4 tons of shearing force over a 3\/4 in. stroke and handles stainless steel up to 20 gauge. Work rests on a 10 x 10 in. table.\u003c\/p\u003e\n\u003ch4\u003eHands Free to Hold the Work\u003c\/h4\u003e\n\u003cp\u003ePedal operation leaves both hands available to position and hold the sheet against the blades.\u003c\/p\u003e\n\u003ch4\u003eResharpenable Tool-Steel Blades\u003c\/h4\u003e\n\u003cp\u003eThe notching blades are hardened, precision-ground alloy tool steel and can be sharpened on a surface grinder.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/1007258__sn_f16_fn_web2_jpg.jpg?v=1793126413\u0026amp;width=1200\" alt=\"Baileigh SN-F16-FN corner notcher view 1\" loading=\"lazy\" width=\"1200\" height=\"1200\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e16 ga. mild steel capacity\u003c\/b\u003e\u003cspan\u003e20 ga. stainless steel\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e3.1 x 3.1 in. notch\u003c\/b\u003e\u003cspan\u003efixed 90-degree angle\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e4-ton shearing force\u003c\/b\u003e\u003cspan\u003e3\/4 in. stroke\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFoot pedal operation\u003c\/b\u003e\u003cspan\u003eno electrical connection required\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e10 x 10 in. table\u003c\/b\u003e\u003cspan\u003esupports the sheet while notching\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustable blade gap\u003c\/b\u003e\u003cspan\u003eset for different sheet thicknesses\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAlloy tool-steel blades\u003c\/b\u003e\u003cspan\u003ehardened, precision ground, resharpenable\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eCorner notcher specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSN-F16-FN \/ BA9-1007258\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation\u003c\/td\u003e\n\u003ctd\u003eManual, foot pedal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eNone required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShearing Force\u003c\/td\u003e\n\u003ctd\u003e4 tons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity, Mild Steel\u003c\/td\u003e\n\u003ctd\u003e16 ga. (1.6 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity, Stainless Steel\u003c\/td\u003e\n\u003ctd\u003e20 ga. (0.912 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotch Size\u003c\/td\u003e\n\u003ctd\u003e3.1 x 3.1 in. x 90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStroke\u003c\/td\u003e\n\u003ctd\u003e3\/4 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable Size\u003c\/td\u003e\n\u003ctd\u003e10 x 10 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlades\u003c\/td\u003e\n\u003ctd\u003eHardened, precision-ground alloy tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e60 x 44 x 48 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e310 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325414936\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/10a192c65f1e9eac\/original\/SN-F16-FN-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SN-F16-FN Corner Notcher Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec ffx-vid\"\u003e\n\u003ch3\u003eSee it in action\u003c\/h3\u003e\n\u003cdiv class=\"ffx-vids\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/pmLdEvhv_gw\" title=\"Baileigh SN-F16-FN Foot Operated Sheet Metal Corner Notcher Shear 16 Gauge Capacity\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen loading=\"lazy\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003eBaileigh video: Baileigh SN-F16-FN Foot Operated Sheet Metal Corner Notcher Shear 16 Gauge Capacity.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh corner notcher questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the SN-F16-FN need power?\u003c\/summary\u003e\u003cp\u003eNo. It is a manual notcher operated by a foot pedal, with no electrical connection.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the largest notch it cuts?\u003c\/summary\u003e\u003cp\u003e3.1 x 3.1 in. at a fixed 90 degrees, in mild steel up to 16 gauge or stainless steel up to 20 gauge.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow is it installed?\u003c\/summary\u003e\u003cp\u003eThe manual calls for a level concrete floor at least 4 in. thick (6 in. preferred), anchored through the holes in the stand base, with shims if the unit rocks.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan the blades be sharpened?\u003c\/summary\u003e\u003cp\u003eYes. The blades are hardened, precision-ground alloy tool steel and can be sharpened on a surface grinder.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67854479491374,"sku":"BA9-1007258","price":1451.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/1007258__sn_f16_fn_web2_jpg.jpg?v=1793126413"},{"product_id":"baileigh-sn-f16-hn-hand-operated-corner-notcher-16-ga-mild-steel-6-x-6-in-notch","title":"Baileigh SN-F16-HN Hand-Operated Corner Notcher, 16 Ga. Mild Steel, 6 x 6 in. Notch","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e6 x 6\u003ci\u003ein. notch\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHand-Operated Corner Notcher\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e16 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eShear Force\u003c\/span\u003e\u003cb\u003e4 tons\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SN-F16-HN Hand-Operated Corner Notcher, 16 Ga. Mild Steel, 6 x 6 in. Notch\u003c\/h2\u003e\n\u003cp\u003eThe SN-F16-HN is a stand-mounted corner notcher worked by a hand lever, with no power required. It cuts 90-degree notches up to 6 x 6 in. in mild steel up to 16 gauge.\u003c\/p\u003e\n\u003cp\u003eIt produces 4 tons of shearing force over a 3\/4 in. stroke and handles stainless steel up to 20 gauge. An 18 x 12 in. table carries two angle gauges and two rules for locating each notch.\u003c\/p\u003e\n\u003ch4\u003eNotch Corners or Edges\u003c\/h4\u003e\n\u003cp\u003eThe table gauges let you place a notch at a corner or at any point along the edge of the sheet.\u003c\/p\u003e\n\u003ch4\u003eLong-Life Blades\u003c\/h4\u003e\n\u003cp\u003eThe upper blade is reversible, and each lower blade has four cutting edges and can be resharpened on a surface grinder.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/1007260__sn_f16hn_web1_jpg.jpg?v=1793126489\u0026amp;width=1200\" alt=\"Baileigh SN-F16-HN corner notcher view 1\" loading=\"lazy\" width=\"1200\" height=\"1200\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e6 x 6 in. notch\u003c\/b\u003e\u003cspan\u003efixed 90-degree angle\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e16 ga. mild steel capacity\u003c\/b\u003e\u003cspan\u003e20 ga. stainless steel\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e4-ton shearing force\u003c\/b\u003e\u003cspan\u003e3\/4 in. stroke\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHand lever operation\u003c\/b\u003e\u003cspan\u003eno electrical connection required\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e18 x 12 in. work table\u003c\/b\u003e\u003cspan\u003etwo angle gauges and two rules\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReversible upper blade\u003c\/b\u003e\u003cspan\u003efour-edge lower blades\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAlloy tool-steel blades\u003c\/b\u003e\u003cspan\u003ehardened, precision ground, resharpenable\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eCorner notcher specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSN-F16-HN \/ BA9-1007260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation\u003c\/td\u003e\n\u003ctd\u003eManual, hand lever\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eNone required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShearing Force\u003c\/td\u003e\n\u003ctd\u003e4 tons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity, Mild Steel\u003c\/td\u003e\n\u003ctd\u003e16 ga. (1.6 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity, Stainless Steel\u003c\/td\u003e\n\u003ctd\u003e20 ga. (0.912 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotch Size\u003c\/td\u003e\n\u003ctd\u003e6 x 6 in. x 90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStroke\u003c\/td\u003e\n\u003ctd\u003e3\/4 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable Size\u003c\/td\u003e\n\u003ctd\u003e18 x 12 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlades\u003c\/td\u003e\n\u003ctd\u003eHardened, precision-ground alloy tool steel; reversible upper blade, four-edge lower blades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eStand mounted, anchored to a solid floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e60 x 44 x 48 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e275 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325414950\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/613ddd81412699a7\/original\/SN-F16-HN-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SN-F16-HN Corner Notcher Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh corner notcher questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the SN-F16-HN need power?\u003c\/summary\u003e\u003cp\u003eNo. It is operated by pulling the handle forward and down, with no electrical connection.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the largest notch it cuts?\u003c\/summary\u003e\u003cp\u003e6 x 6 in. at a fixed 90 degrees, in mild steel up to 16 gauge or stainless steel up to 20 gauge.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it bench or stand mounted?\u003c\/summary\u003e\u003cp\u003eThe manual shows the notcher bolted to a stand, anchored to a solid floor at least 4 in. thick (6 in. preferred).\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it notch along an edge, not just a corner?\u003c\/summary\u003e\u003cp\u003eYes. The table gauges let you locate a notch at a corner or at any position along the edge of the material.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67854494368046,"sku":"BA9-1007260","price":1682.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/1007260__sn_f16hn_web1_jpg.jpg?v=1793126489"},{"product_id":"baileigh-sh-5203-hd-52-inch-hydraulic-sheet-metal-shear-1-4-inch-mild-steel-15-hp-220v-3ph","title":"Baileigh SH-5203-HD 52-Inch Hydraulic Sheet Metal Shear, 1\/4-Inch Mild Steel, 15 HP 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e52\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e1\/4 in.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStainless\u003c\/span\u003e\u003cb\u003e7 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-5203-HD 52-Inch Hydraulic Sheet Metal Shear, 1\/4-Inch Mild Steel, 15 HP 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-5203-HD is a hydraulic shear with a 52 in. maximum shearing length, rated for up to 1\/4 in. mild steel and 7 gauge stainless steel. A 15 HP motor running on 220V 3-phase power drives the hydraulic system.\u003c\/p\u003e\n\u003cp\u003eThe machine cycles at 16 to 24 strokes per minute and handles material down to 24 gauge. It comes with a manual back gauge, a 39.37 in. front squaring arm with a material stop, and a front support arm, and it ships at 5,720 lb.\u003c\/p\u003e\n\u003ch4\u003eHydraulic Hold-Downs\u003c\/h4\u003e\n\u003cp\u003eHold-downs with rubber pads clamp the sheet ahead of the blade before each cut.\u003c\/p\u003e\n\u003ch4\u003eShadow Line Lighting\u003c\/h4\u003e\n\u003cp\u003eA 4 ft. fluorescent light and a wire along the top blade cast a shadow line on the material so the cut can be lined up by eye.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH5203HD_IMG_MAIN.jpg?v=1793161157\u0026amp;width=1200\" alt=\"Baileigh SH-5203-HD hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"1057\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e52 in. shearing length\u003c\/b\u003e\u003cspan\u003e1,321 mm maximum cut length\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1\/4 in. mild steel\u003c\/b\u003e\u003cspan\u003erated on 64,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7 ga. stainless steel\u003c\/b\u003e\u003cspan\u003erated on 100,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e16 to 24 strokes per minute\u003c\/b\u003e\u003cspan\u003ehydraulic drive from a 15 HP motor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBlade angle 1\/2 to 2 degrees\u003c\/b\u003e\u003cspan\u003eblade clearance set with a manual lever\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSingle, inch or auto mode\u003c\/b\u003e\u003cspan\u003echosen with a selector switch\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFoot control pedestal\u003c\/b\u003e\u003cspan\u003ewith an E-stop, and it can be moved where the operator needs it\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCycle counter with reset\u003c\/b\u003e\u003cspan\u003eplus a timer to set the cut length\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic Shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-5203-HD \/ BA9-1007087\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e15 HP (11.2 kW), 220V \/ 3-phase \/ 60 Hz, 27 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower requirements\u003c\/td\u003e\n\u003ctd\u003e220V 3-phase 60 Hz; power cord supplied by the customer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shearing length\u003c\/td\u003e\n\u003ctd\u003e52 in. (1,321 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMild steel capacity\u003c\/td\u003e\n\u003ctd\u003e1\/4 in. (6.35 mm), based on 64,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless steel capacity\u003c\/td\u003e\n\u003ctd\u003e7 ga. (4.55 mm), based on 100,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum material thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga. (0.607 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e16 to 24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gauge length\u003c\/td\u003e\n\u003ctd\u003e39.37 in. (1,000 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge length\u003c\/td\u003e\n\u003ctd\u003e23.62 in. (600 mm), manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle\u003c\/td\u003e\n\u003ctd\u003e1\/2° to 2°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade clearance\u003c\/td\u003e\n\u003ctd\u003eManual adjustment lever\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlades\u003c\/td\u003e\n\u003ctd\u003eHigh carbon, high chromium, multiple cutting edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e34 gal. (128.7 L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e91 x 54 x 65 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e5,720 lb (2,600 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eManual back gauge, squaring arm with material stop, front support arm with material stop, foot control pedestal, toolbox (grease gun, adjustable wrench, Phillips screwdriver, hex wrench set, touch-up paint), 4 leveling pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325413403\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/3de66b61fb366ddd\/original\/SH_5203HD_1of2_11_2018_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-5203-HD Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-5203-HD need?\u003c\/summary\u003e\u003cp\u003eIt runs on 220V 3-phase 60 Hz power. The 15 HP motor draws 27 A, and the manual calls for a time-delay fuse or breaker. The power cord is supplied by the customer and wired to code.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow thick a sheet can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 1\/4 in. mild steel or 7 gauge stainless steel across the 52 in. length, and down to 24 gauge.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the back gauge manual or NC?\u003c\/summary\u003e\u003cp\u003eThis model uses a manual back gauge with a 23.62 in. length. It is attached to the back of the shear during setup.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow much does it weigh to ship?\u003c\/summary\u003e\u003cp\u003eThe shipping weight is 5,720 lb, and the shipping dimensions are 91 x 54 x 65 in.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat warranty does it carry?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861499412782,"sku":"BA9-1007087","price":43999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH5203HD_IMG_MAIN.jpg?v=1793161157"},{"product_id":"baileigh-sh-8003-hd-80-inch-hydraulic-sheet-metal-shear-1-4-inch-mild-steel-15-hp-220v-3ph","title":"Baileigh SH-8003-HD 80-Inch Hydraulic Sheet Metal Shear, 1\/4-Inch Mild Steel, 15 HP 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e80\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e1\/4 in.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStainless\u003c\/span\u003e\u003cb\u003e7 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-8003-HD 80-Inch Hydraulic Sheet Metal Shear, 1\/4-Inch Mild Steel, 15 HP 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-8003-HD is a hydraulic shear with an 80 in. maximum shearing length, rated for up to 1\/4 in. mild steel and 7 gauge stainless steel. A 15 HP motor running on 220V 3-phase power drives the hydraulic system.\u003c\/p\u003e\n\u003cp\u003eThe machine cycles at 16 to 24 strokes per minute. It comes with a manual back gauge, a 39.37 in. front squaring arm with a material stop, and a front support arm, and it ships at 7,260 lb.\u003c\/p\u003e\n\u003ch4\u003eHydraulic Hold-Downs\u003c\/h4\u003e\n\u003cp\u003eHold-downs with rubber pads clamp the sheet ahead of the blade before each cut.\u003c\/p\u003e\n\u003ch4\u003eShadow Line Lighting\u003c\/h4\u003e\n\u003cp\u003eA 4 ft. fluorescent light and a wire along the top blade cast a shadow line on the material so the cut can be lined up by eye.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ba9-1012272_img_main_1.jpg?v=1793161306\u0026amp;width=1200\" alt=\"Baileigh SH-8003-HD hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"1200\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e80 in. shearing length\u003c\/b\u003e\u003cspan\u003e2,032 mm maximum cut length\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1\/4 in. mild steel\u003c\/b\u003e\u003cspan\u003erated on 64,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7 ga. stainless steel\u003c\/b\u003e\u003cspan\u003erated on 100,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e16 to 24 strokes per minute\u003c\/b\u003e\u003cspan\u003ehydraulic drive from a 15 HP motor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBlade angle 1\/2 to 2 degrees\u003c\/b\u003e\u003cspan\u003eblade clearance set with a manual lever\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSingle, inch or auto mode\u003c\/b\u003e\u003cspan\u003echosen with a selector switch\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFoot control pedestal\u003c\/b\u003e\u003cspan\u003ewith an E-stop, and it can be moved where the operator needs it\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCycle counter with reset\u003c\/b\u003e\u003cspan\u003eplus a timer to set the cut length\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic Shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-8003-HD \/ BA9-1012272\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e15 HP (11.2 kW), 220V \/ 3-phase \/ 60 Hz, 46 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower requirements\u003c\/td\u003e\n\u003ctd\u003e220V 3-phase 60 Hz; power cord supplied by the customer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shearing length\u003c\/td\u003e\n\u003ctd\u003e80 in. (2,032 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMild steel capacity\u003c\/td\u003e\n\u003ctd\u003e1\/4 in. (6.35 mm), based on 64,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless steel capacity\u003c\/td\u003e\n\u003ctd\u003e7 ga. (4.55 mm), based on 100,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e16 to 24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gauge length\u003c\/td\u003e\n\u003ctd\u003e39.37 in. (1,000 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge length\u003c\/td\u003e\n\u003ctd\u003e23.62 in. (600 mm), manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle\u003c\/td\u003e\n\u003ctd\u003e1\/2° to 2°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade clearance\u003c\/td\u003e\n\u003ctd\u003eManual adjustment lever\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlades\u003c\/td\u003e\n\u003ctd\u003eHigh carbon, high chromium, multiple cutting edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e28 gal. (106 L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e130 x 48 x 65 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e7,260 lb (3,300 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eManual back gauge, squaring arm with material stop, front support arm with material stop, foot control pedestal, toolbox (grease gun, adjustable wrench, Phillips screwdriver, hex wrench set, touch-up paint), 4 leveling pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e019907775744\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/7a90e600c093b410\/original\/SH_8003HD-Manual-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-8003-HD Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-8003-HD need?\u003c\/summary\u003e\u003cp\u003eIt runs on 220V 3-phase 60 Hz power. The 15 HP motor draws 46 A, and the manual calls for a time-delay fuse or breaker. The power cord is supplied by the customer and wired to code.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow thick a sheet can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 1\/4 in. mild steel or 7 gauge stainless steel across the full 80 in. length.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the back gauge manual or NC?\u003c\/summary\u003e\u003cp\u003eThis model uses a manual back gauge with a 23.62 in. length. It is set with a hand wheel, scale and indicator.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow much does it weigh to ship?\u003c\/summary\u003e\u003cp\u003eThe shipping weight is 7,260 lb, and the shipping dimensions are 130 x 48 x 65 in.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat warranty does it carry?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861510947118,"sku":"BA9-1012272","price":46216.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ba9-1012272_img_main_1.jpg?v=1793161306"},{"product_id":"baileigh-sh-5203-hd-nc-52-inch-hydraulic-shear-with-nc-back-gauge-1-4-inch-mild-steel-220v-3ph","title":"Baileigh SH-5203-HD-NC 52-Inch Hydraulic Shear with NC Back Gauge, 1\/4-Inch Mild Steel, 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e52\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear, NC Back Gauge\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e1\/4 in.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStainless\u003c\/span\u003e\u003cb\u003e7 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-5203-HD-NC 52-Inch Hydraulic Shear with NC Back Gauge, 1\/4-Inch Mild Steel, 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-5203-HD-NC is a 52 in. hydraulic shear with a numerically controlled back gauge, rated for up to 1\/4 in. mild steel and 7 gauge stainless steel. A 15 HP motor on 220V 3-phase power drives the hydraulics.\u003c\/p\u003e\n\u003cp\u003eIt cycles at 16 to 24 strokes per minute and cuts material as thin as 24 gauge. The back gauge runs on a ball screw driven by its own 1\/2 HP motor, with an encoder reading its position, and the machine ships at 5,720 lb.\u003c\/p\u003e\n\u003ch4\u003eNC Back Gauge\u003c\/h4\u003e\n\u003cp\u003eBack gauge positions are entered at the NC controller, and limit switches mark the front and rear ends of travel.\u003c\/p\u003e\n\u003ch4\u003ePushbutton Rake Adjustment\u003c\/h4\u003e\n\u003cp\u003eThe rake angle is changed with increase and decrease pushbuttons, and indicator lights show the material gauge setting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH5203HDNC_IMG_MAIN.jpg?v=1793161435\u0026amp;width=1200\" alt=\"Baileigh SH-5203-HD-NC hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"1146\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e52 in. shearing length\u003c\/b\u003e\u003cspan\u003e1,321 mm maximum cut length\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1\/4 in. mild steel\u003c\/b\u003e\u003cspan\u003erated on 64,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7 ga. stainless steel\u003c\/b\u003e\u003cspan\u003erated on 100,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e16 to 24 strokes per minute\u003c\/b\u003e\u003cspan\u003ehydraulic drive from a 15 HP motor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBall screw back gauge\u003c\/b\u003e\u003cspan\u003e1\/2 HP drive motor with encoder feedback\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e8 hydraulic hold-downs\u003c\/b\u003e\u003cspan\u003ealong the length of the blade\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShadow line lighting\u003c\/b\u003e\u003cspan\u003egreen lamp and wire along the top blade to line up the cut\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSingle, inch or auto mode\u003c\/b\u003e\u003cspan\u003ecycled from a foot switch\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic Shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-5203-HD-NC \/ BA9-1007095\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e15 HP (11.2 kW), 220V \/ 3-phase \/ 60 Hz, 48 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower requirements\u003c\/td\u003e\n\u003ctd\u003e220V 3-phase 60 Hz; power cord supplied by the customer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shearing length\u003c\/td\u003e\n\u003ctd\u003e52 in. (1,321 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMild steel capacity\u003c\/td\u003e\n\u003ctd\u003e1\/4 in. (6.35 mm), based on 64,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless steel capacity\u003c\/td\u003e\n\u003ctd\u003e7 ga. (4.55 mm), based on 100,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum material thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga. (0.607 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e16 to 24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gauge length\u003c\/td\u003e\n\u003ctd\u003e39.37 in. (1,000 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge length\u003c\/td\u003e\n\u003ctd\u003e23.62 in. (600 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge drive\u003c\/td\u003e\n\u003ctd\u003eNC controlled, ball screw, 1\/2 HP (0.37 kW) motor, encoder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle\u003c\/td\u003e\n\u003ctd\u003e1\/2° to 2°, pushbutton rake adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade clearance\u003c\/td\u003e\n\u003ctd\u003eManual adjustment lever\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold-downs\u003c\/td\u003e\n\u003ctd\u003e8 hydraulic cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e34 gal. (128.7 L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e91 x 54 x 65 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e5,720 lb (2,600 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eNC back gauge, squaring arm, material support arm, ball transfer tables, foot switch, shadow line light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer); replacement blades are sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325413465\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/ab94279a9aea262\/original\/SH_5203HD_NC_1of2_08_2018_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-5203-HD-NC Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec ffx-vid\"\u003e\n\u003ch3\u003eSee it in action\u003c\/h3\u003e\n\u003cdiv class=\"ffx-vids\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/RO0uhltKwTM\" title=\"Baileigh Industrial SH-5203-HD-NC Hydraulic Shear\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen loading=\"lazy\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003eBaileigh video: Baileigh Industrial SH-5203-HD-NC Hydraulic Shear.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-5203-HD-NC need?\u003c\/summary\u003e\u003cp\u003e220V 3-phase 60 Hz. The 15 HP motor draws 48 A, and the manual calls for a time-delay fuse or breaker sized just above full-load current. The customer supplies the power cord.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow is the back gauge set?\u003c\/summary\u003e\u003cp\u003ePositions are entered at the NC back gauge controller. A 1\/2 HP motor drives the gauge on a ball screw, and an encoder tracks where it is.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 1\/4 in. mild steel or 7 gauge stainless steel over 52 in., and down to 24 gauge.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow is it shipped?\u003c\/summary\u003e\u003cp\u003eShipping weight is 5,720 lb, with shipping dimensions of 91 x 54 x 65 in.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat warranty does it carry?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861515043118,"sku":"BA9-1007095","price":52579.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH5203HDNC_IMG_MAIN.jpg?v=1793161435"},{"product_id":"baileigh-sh-70250-hd-96-inch-hydraulic-shear-with-nc-back-gauge-1-4-inch-mild-steel-10-hp-220v-3ph","title":"Baileigh SH-70250-HD 96-Inch Hydraulic Shear with NC Back Gauge, 1\/4-Inch Mild Steel, 10 HP 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e96\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear, NC Back Gauge\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e1\/4 in.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStainless\u003c\/span\u003e\u003cb\u003e0.177 in.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-70250-HD 96-Inch Hydraulic Shear with NC Back Gauge, 1\/4-Inch Mild Steel, 10 HP 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-70250-HD is a hydraulic shear with a 96 in. shear length, rated for 1\/4 in. mild steel and 0.177 in. (4.5 mm) stainless steel. Its 10 HP main motor runs on 220V 3-phase power.\u003c\/p\u003e\n\u003cp\u003eIt makes 14 to 45 strokes per minute with up to 32,597 lbf of cutting force. A motorized back gauge, run by a YSD6000s numerical control, positions from 0.4 to 23.62 in., and the shear ships at 10,362 lb.\u003c\/p\u003e\n\u003ch4\u003eProgrammable Back Gauge\u003c\/h4\u003e\n\u003cp\u003eSingle-step and multi-step programs (up to 25 steps) are stored in numbered folders, and a variable frequency drive slows the gauge as it nears the target.\u003c\/p\u003e\n\u003ch4\u003eRake and Gap Adjustment\u003c\/h4\u003e\n\u003cp\u003eThe blade rake is set with pushbuttons and read on a digital display, and the blade gap is set with a hand wheel and pointer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH70250HD_IMG_MAIN.jpg?v=1793161543\u0026amp;width=1200\" alt=\"Baileigh SH-70250-HD hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"843\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e96 in. shear length\u003c\/b\u003e\u003cspan\u003e2,440 mm cut\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1\/4 in. mild steel\u003c\/b\u003e\u003cspan\u003erated on 64,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e0.177 in. stainless steel\u003c\/b\u003e\u003cspan\u003erated on 100,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e14 to 45 strokes per minute\u003c\/b\u003e\u003cspan\u003e5.39 in. maximum ram travel\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e32,597 lbf cutting force\u003c\/b\u003e\u003cspan\u003e2,175 PSI maximum hydraulic pressure\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMotorized NC back gauge\u003c\/b\u003e\u003cspan\u003e0.4 to 23.62 in. range\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHand wheel blade gap\u003c\/b\u003e\u003cspan\u003e0.002 to 0.024 in. clearance\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSafety equipment\u003c\/b\u003e\u003cspan\u003elight curtain on the rear guards, E-stop and front safety bar switch\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic Shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-70250-HD \/ BA9-1007179\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain motor\u003c\/td\u003e\n\u003ctd\u003e10 HP (7.5 kW), 220V \/ 3-phase \/ 60 Hz, 28 A at 1,740 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge motor\u003c\/td\u003e\n\u003ctd\u003e0.5 HP (0.37 kW), 220V \/ 3-phase \/ 60 Hz, 2 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower requirements\u003c\/td\u003e\n\u003ctd\u003e220V 3-phase 60 Hz; power cord supplied by the customer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear length\u003c\/td\u003e\n\u003ctd\u003e96 in. (2,440 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMild steel capacity\u003c\/td\u003e\n\u003ctd\u003e0.25 in. (6.35 mm), based on 64,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless steel capacity\u003c\/td\u003e\n\u003ctd\u003e0.177 in. (4.5 mm), based on 100,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum material thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga. (0.607 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e14 to 45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum ram travel\u003c\/td\u003e\n\u003ctd\u003e5.39 in. (137 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum cutting force\u003c\/td\u003e\n\u003ctd\u003e32,597 lbf (140 kN)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eMotorized, YSD6000s NC control, 0.4 to 23.62 in. (10 to 600 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade clearance\u003c\/td\u003e\n\u003ctd\u003e0.002 to 0.024 in. (0.05 to 0.60 mm), manual hand wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRake angle\u003c\/td\u003e\n\u003ctd\u003ePushbutton adjustment with digital readout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum hydraulic pressure\u003c\/td\u003e\n\u003ctd\u003e2,175 PSI (15 MPa)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic pump flow\u003c\/td\u003e\n\u003ctd\u003e10 GPM (38 L\/min)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic reservoir\u003c\/td\u003e\n\u003ctd\u003e25 gal. (94.6 L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions\u003c\/td\u003e\n\u003ctd\u003e136 x 112.5 x 69 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e10,362 lb (4,700 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eFoot pedal, squaring arm, left and right back guards with support pads, light curtain emitters and reflectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325414240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/5510aef6428e455a\/original\/SH_70250_HD_1_of_2_10_2019_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-70250-HD Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-70250-HD need?\u003c\/summary\u003e\u003cp\u003e220V 3-phase 60 Hz. The 10 HP main motor draws 28 A and the back gauge motor 2 A. The manual calls for a time-delay fuse or breaker, and the customer supplies the power cord.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow does the back gauge work?\u003c\/summary\u003e\u003cp\u003eIt is motorized and run by a YSD6000s numerical control, with a range of 0.4 to 23.62 in. It can run single-step or multi-step programs of up to 25 steps.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow thick a sheet can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 1\/4 in. mild steel or 0.177 in. stainless steel across 96 in., and down to 24 gauge.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow is it shipped?\u003c\/summary\u003e\u003cp\u003eShipping weight is 10,362 lb, and the shipping dimensions are 136 x 112.5 x 69 in.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat warranty does it carry?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861517140270,"sku":"BA9-1007179","price":55749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH70250HD_IMG_MAIN.jpg?v=1793161543"},{"product_id":"baileigh-sh-5214-52-inch-hydraulic-sheet-metal-shear-14-gauge-mild-steel-220v-1ph","title":"Baileigh SH-5214 52-Inch Hydraulic Sheet Metal Shear, 14-Gauge Mild Steel, 220V 1Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e52\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e14 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStrokes\/Min\u003c\/span\u003e\u003cb\u003e35\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-5214 52-Inch Hydraulic Sheet Metal Shear, 14-Gauge Mild Steel, 220V 1Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-5214 is a hydraulic sheet metal shear with a 52 in. maximum shear length. It cuts up to 14 ga. mild steel or 18 ga. stainless steel and runs on 220V single-phase power through a 3 HP motor.\u003c\/p\u003e\n\u003cp\u003eIt cycles at 35 strokes per minute and handles material down to 24 ga. Front and back gate lengths are both 24 in., the blade angle is 1 degree, and the hydraulic system holds 17 gal. of oil.\u003c\/p\u003e\n\u003ch4\u003eThree Operating Modes\u003c\/h4\u003e\n\u003cp\u003eA selector switches between single stroke, inch (step-down) and auto, where the blade keeps cycling while the foot pedal is held down.\u003c\/p\u003e\n\u003ch4\u003eMulti-Edge Blades\u003c\/h4\u003e\n\u003cp\u003eThe blades are high carbon, high chrome alloy tool steel. The top blade has two usable edges and the bottom blade has four, so they can be turned before replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH5214_IMG_MAIN.jpg?v=1793161561\u0026amp;width=1200\" alt=\"Baileigh SH-5214 hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"962\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e52 in. shear length\u003c\/b\u003e\u003cspan\u003ecuts sheets up to 52 in. wide\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e14 ga. mild steel\u003c\/b\u003e\u003cspan\u003e18 ga. stainless, 24 ga. minimum\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e3 HP, 220V 1Ph\u003c\/b\u003e\u003cspan\u003e18 amp motor, no three-phase supply needed\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e35 strokes per minute\u003c\/b\u003e\u003cspan\u003esingle, inch and auto cycle modes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpring-loaded hold-downs\u003c\/b\u003e\u003cspan\u003eurethane pads clamp the sheet during the cut\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManual back gauge\u003c\/b\u003e\u003cspan\u003ehand wheel with scale and dial indicator\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo E-stop buttons\u003c\/b\u003e\u003cspan\u003eon the control enclosure and the foot pedestal\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront material supports\u003c\/b\u003e\u003cspan\u003ewith front gauge and side gauge for square cuts\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-5214 \/ BA9-1007148\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e3 HP (2.23 kW), 220V \/ 1Ph \/ 60Hz, 18 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shear length\u003c\/td\u003e\n\u003ctd\u003e52 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, mild steel\u003c\/td\u003e\n\u003ctd\u003e14 ga. (based on 64,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, stainless steel\u003c\/td\u003e\n\u003ctd\u003e18 ga. (based on 100,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle\u003c\/td\u003e\n\u003ctd\u003e1°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold-downs\u003c\/td\u003e\n\u003ctd\u003eSpring-loaded with urethane pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eManual, hand wheel with scale and dial indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e17 gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e75 x 36 x 53 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e3,000 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003ePedestal with foot pedal and E-stop switch, manual back gauge with mounting washers and bolts, front material supports, toolbox (lever grease gun, 300 mm adjustable wrench, 6 x 100 mm Phillips screwdriver, 10-piece metric hex wrench set from 1.5 to 10 mm, 3 cans of touch-up paint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer, per the manual); replacement blades are sold by Baileigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325413960\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/6d420a9163a2780a\/original\/SH_5214_12_2018_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-5214 Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-5214 need?\u003c\/summary\u003e\u003cp\u003eIt runs on 220V, single phase, 60Hz. The motor is 3 HP and draws 18 amps. The manual says the customer supplies the power cord, and the machine should be on a grounded circuit with a time-delay fuse or breaker.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the cutting capacity?\u003c\/summary\u003e\u003cp\u003eUp to 14 ga. mild steel or 18 ga. stainless steel across the full 52 in. length, and down to 24 ga. material.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat comes with it?\u003c\/summary\u003e\u003cp\u003eThe foot pedal pedestal with E-stop, the manual back gauge, the front material supports and a toolbox with a grease gun, wrenches, screwdriver, hex keys and touch-up paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year from Baileigh. Hydraulic components carry their manufacturer's warranty, and included die sets, tooling and blades are covered for 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861517500718,"sku":"BA9-1007148","price":12249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH5214_IMG_MAIN.jpg?v=1793161561"},{"product_id":"baileigh-sh-6014-60-inch-hydraulic-sheet-metal-shear-14-gauge-mild-steel-220v-3ph","title":"Baileigh SH-6014 60-Inch Hydraulic Sheet Metal Shear, 14-Gauge Mild Steel, 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e60\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e14 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStrokes\/Min\u003c\/span\u003e\u003cb\u003e30\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-6014 60-Inch Hydraulic Sheet Metal Shear, 14-Gauge Mild Steel, 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-6014 is a hydraulic sheet metal shear with a 60 in. maximum shear length. It cuts up to 14 ga. mild steel or 18 ga. stainless steel and is powered by a 3 HP motor on 220V three-phase power.\u003c\/p\u003e\n\u003cp\u003eIt runs at 30 strokes per minute and takes material as thin as 24 ga. Front and back gates are 24 in. long, the blade angle is 1 degree, and the hydraulic reservoir holds 17 gal.\u003c\/p\u003e\n\u003ch4\u003eThree Operating Modes\u003c\/h4\u003e\n\u003cp\u003eChoose single stroke, inch (step-down) or auto, which keeps cycling the blade while the foot pedal is held.\u003c\/p\u003e\n\u003ch4\u003eMulti-Edge Blades\u003c\/h4\u003e\n\u003cp\u003eHigh carbon, high chrome alloy tool steel blades: the top blade has two usable edges and the bottom blade has four.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH6014_IMG_MAIN.jpg?v=1793161586\u0026amp;width=1200\" alt=\"Baileigh SH-6014 hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"896\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e60 in. shear length\u003c\/b\u003e\u003cspan\u003efor sheets up to 5 ft wide\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e14 ga. mild steel\u003c\/b\u003e\u003cspan\u003e18 ga. stainless, 24 ga. minimum\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e3 HP, 220V 3Ph\u003c\/b\u003e\u003cspan\u003e12 amp motor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e30 strokes per minute\u003c\/b\u003e\u003cspan\u003esingle, inch and auto modes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpring-loaded hold-downs\u003c\/b\u003e\u003cspan\u003epads hold the sheet flat for the cut\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManual back gauge\u003c\/b\u003e\u003cspan\u003ehand wheel, scale and indicator\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eE-stop on the foot pedestal\u003c\/b\u003e\u003cspan\u003estops all machine functions\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront material supports\u003c\/b\u003e\u003cspan\u003eincluded with the machine\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-6014 \/ BA9-1007176\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e3 HP (2.23 kW), 220V \/ 3Ph \/ 60Hz, 12 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shear length\u003c\/td\u003e\n\u003ctd\u003e60 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, mild steel\u003c\/td\u003e\n\u003ctd\u003e14 ga. (based on 64,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, stainless steel\u003c\/td\u003e\n\u003ctd\u003e18 ga. (based on 100,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle\u003c\/td\u003e\n\u003ctd\u003e1°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold-downs\u003c\/td\u003e\n\u003ctd\u003eSpring-loaded with adjustable spring screws and pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eManual, hand wheel with scale and indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e17 gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e84 x 36 x 56 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e3,200 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003ePedestal with foot pedal and E-stop switch, manual back gauge with mounting washers and bolts, front material supports, toolbox (lever grease gun, 300 mm adjustable wrench, 6 x 100 mm Phillips screwdriver, 10-piece metric hex wrench set from 1.5 to 10 mm, 3 cans of touch-up paint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer, per the manual); replacement blades are sold by Baileigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325414226\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/195fe526e58cb75b\/original\/SH_6014_02_2018_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-6014 Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-6014 need?\u003c\/summary\u003e\u003cp\u003e220V, three phase, 60Hz. The 3 HP motor draws 12 amps. The customer supplies the power cord, per the manual.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow thick a sheet can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 14 ga. mild steel or 18 ga. stainless steel over the full 60 in. length, and as thin as 24 ga.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is included?\u003c\/summary\u003e\u003cp\u003eThe foot pedal pedestal with E-stop, manual back gauge, front material supports and a toolbox with a grease gun, wrenches, screwdriver, hex keys and touch-up paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year from Baileigh. Hydraulic components carry their manufacturer's warranty, and included die sets, tooling and blades are covered for 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861518582062,"sku":"BA9-1007176","price":16004.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH6014_IMG_MAIN.jpg?v=1793161586"},{"product_id":"baileigh-sh-5210-52-inch-hydraulic-sheet-metal-shear-10-gauge-mild-steel-220v-1ph","title":"Baileigh SH-5210 52-Inch Hydraulic Sheet Metal Shear, 10-Gauge Mild Steel, 220V 1Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e52\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e10 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStrokes\/Min\u003c\/span\u003e\u003cb\u003e28\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-5210 52-Inch Hydraulic Sheet Metal Shear, 10-Gauge Mild Steel, 220V 1Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-5210 is a hydraulic sheet metal shear with a 52 in. maximum shear length, rated for 10 ga. mild steel or 13 ga. stainless steel. It runs on 220V single-phase power, so it suits shops without a three-phase supply.\u003c\/p\u003e\n\u003cp\u003eIt cycles at 28 strokes per minute and handles material down to 24 ga. Front and back gates are 24 in., the blade angle is 1 degree, and the hydraulic oil capacity is 17 gal.\u003c\/p\u003e\n\u003ch4\u003eThree Operating Modes\u003c\/h4\u003e\n\u003cp\u003eSingle stroke, inch (step-down) and auto, which repeats the cut while the foot pedal is held.\u003c\/p\u003e\n\u003ch4\u003eMulti-Edge Blades\u003c\/h4\u003e\n\u003cp\u003eThe high carbon, high chrome alloy tool steel blades give two usable edges on the top blade and four on the bottom blade.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH5210_IMG_MAIN.jpg?v=1793161603\u0026amp;width=1200\" alt=\"Baileigh SH-5210 hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"1030\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e52 in. shear length\u003c\/b\u003e\u003cspan\u003efor sheets up to 52 in. wide\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e10 ga. mild steel\u003c\/b\u003e\u003cspan\u003e13 ga. stainless, 24 ga. minimum\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e220V single phase\u003c\/b\u003e\u003cspan\u003e60Hz supply\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e28 strokes per minute\u003c\/b\u003e\u003cspan\u003esingle, inch and auto modes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpring-loaded hold-downs\u003c\/b\u003e\u003cspan\u003ewith urethane pads\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManual back gauge\u003c\/b\u003e\u003cspan\u003ehand wheel, scale and dial indicator\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFoot pedal with E-stop\u003c\/b\u003e\u003cspan\u003eon a separate pedestal\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront material supports\u003c\/b\u003e\u003cspan\u003eincluded with the machine\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-5210 \/ BA9-1007100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower requirements\u003c\/td\u003e\n\u003ctd\u003e220V \/ 1Ph \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shear length\u003c\/td\u003e\n\u003ctd\u003e52 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, mild steel\u003c\/td\u003e\n\u003ctd\u003e10 ga. (based on 64,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, stainless steel\u003c\/td\u003e\n\u003ctd\u003e13 ga. (based on 100,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle\u003c\/td\u003e\n\u003ctd\u003e1°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold-downs\u003c\/td\u003e\n\u003ctd\u003eSpring-loaded with urethane pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eManual, hand wheel with scale and dial indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e17 gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e75 x 36 x 53 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e3,000 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003ePedestal with foot pedal and E-stop switch, manual back gauge with mounting washers and bolts, front material supports, toolbox (lever grease gun, 300 mm adjustable wrench, 6 x 100 mm Phillips screwdriver, 10-piece metric hex wrench set from 1.5 to 10 mm, 3 cans of touch-up paint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer, per the manual); replacement blades are sold by Baileigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325413502\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/c9e6cb56a1e8223\/original\/SH_5210_10_2020_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-5210 Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-5210 need?\u003c\/summary\u003e\u003cp\u003e220V, single phase, 60Hz. The customer supplies the power cord, and the manual requires the machine to be properly grounded.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the cutting capacity?\u003c\/summary\u003e\u003cp\u003eUp to 10 ga. mild steel or 13 ga. stainless steel across 52 in., down to 24 ga.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is included?\u003c\/summary\u003e\u003cp\u003eThe foot pedal pedestal with E-stop, manual back gauge, front material supports and a toolbox with a grease gun, wrenches, screwdriver, hex keys and touch-up paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year from Baileigh. Hydraulic components carry their manufacturer's warranty, and included die sets, tooling and blades are covered for 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861518778670,"sku":"BA9-1007100","price":16799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH5210_IMG_MAIN.jpg?v=1793161603"},{"product_id":"baileigh-sh-8014-80-inch-compact-hydraulic-shear-14-gauge-mild-steel-3-hp-220v-3ph","title":"Baileigh SH-8014 80-Inch Compact Hydraulic Shear, 14-Gauge Mild Steel, 3 HP 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e80\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e14 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStrokes\/Min\u003c\/span\u003e\u003cb\u003e26\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-8014 80-Inch Compact Hydraulic Shear, 14-Gauge Mild Steel, 3 HP 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-8014 is a compact hydraulic shear with an 80 in. maximum shear length. It cuts up to 14 ga. mild steel or 18 ga. stainless steel and is driven by a 3 HP motor on 220V three-phase power.\u003c\/p\u003e\n\u003cp\u003eIt runs at 26 strokes per minute and accepts material down to 24 ga. Front and back gates are each 24 in., the blade angle is 1 degree, and the hydraulic system holds 17 gal. of oil.\u003c\/p\u003e\n\u003ch4\u003eThree Operating Modes\u003c\/h4\u003e\n\u003cp\u003eInch mode steps the blade down gradually, single mode makes one cut per pedal press, and auto mode keeps cycling while the pedal is held.\u003c\/p\u003e\n\u003ch4\u003eMulti-Edge Blades\u003c\/h4\u003e\n\u003cp\u003eHigh carbon, high chrome alloy tool steel blades. The top blade has two usable edges and the bottom blade has four.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH8014_IMG_MAIN.jpg?v=1793161620\u0026amp;width=1200\" alt=\"Baileigh SH-8014 hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"845\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e80 in. shear length\u003c\/b\u003e\u003cspan\u003ehandles sheets up to 80 in. wide\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e14 ga. mild steel\u003c\/b\u003e\u003cspan\u003e18 ga. stainless, 24 ga. minimum\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e3 HP, 220V 3Ph\u003c\/b\u003e\u003cspan\u003e12 amp motor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e26 strokes per minute\u003c\/b\u003e\u003cspan\u003esingle, inch and auto modes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHold-downs with pads\u003c\/b\u003e\u003cspan\u003eclamp the sheet before the blade cuts\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManual back gauge\u003c\/b\u003e\u003cspan\u003ehand wheel with scale and indicator\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFoot pedal with E-stop\u003c\/b\u003e\u003cspan\u003eon its own pedestal\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront material supports\u003c\/b\u003e\u003cspan\u003eincluded with the machine\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-8014 \/ BA9-1007207\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e3 HP (2.23 kW), 220V \/ 3Ph \/ 60Hz, 12 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shear length\u003c\/td\u003e\n\u003ctd\u003e80 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, mild steel\u003c\/td\u003e\n\u003ctd\u003e14 ga. (based on 64,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, stainless steel\u003c\/td\u003e\n\u003ctd\u003e18 ga. (based on 100,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle\u003c\/td\u003e\n\u003ctd\u003e1°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eManual, hand wheel with scale and indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e17 gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e104 x 36 x 53 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e4,000 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003ePedestal with foot pedal and E-stop switch, manual back gauge with mounting washers and bolts, front material supports, toolbox (lever grease gun, 300 mm adjustable wrench, 6 x 100 mm Phillips screwdriver, 10-piece metric hex wrench set from 1.5 to 10 mm, 3 cans of touch-up paint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer, per the manual); replacement blades are sold by Baileigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325414509\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/133999277874ac0d\/original\/SH_8014_12_2018_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-8014 Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-8014 need?\u003c\/summary\u003e\u003cp\u003e220V, three phase, 60Hz. The 3 HP motor draws 12 amps, and the power cord is supplied by the customer.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow much can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 14 ga. mild steel or 18 ga. stainless steel over 80 in., and material as thin as 24 ga.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is included?\u003c\/summary\u003e\u003cp\u003eThe foot pedal pedestal with E-stop, manual back gauge, front material supports and a toolbox with a grease gun, wrenches, screwdriver, hex keys and touch-up paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year from Baileigh. Hydraulic components carry their manufacturer's warranty, and included die sets, tooling and blades are covered for 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861519139118,"sku":"BA9-1007207","price":22692.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH8014_IMG_MAIN.jpg?v=1793161620"},{"product_id":"baileigh-sh-6010-60-inch-compact-hydraulic-sheet-metal-shear-10-gauge-mild-steel-220v-3ph","title":"Baileigh SH-6010 60-Inch Compact Hydraulic Sheet Metal Shear, 10-Gauge Mild Steel, 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e60\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e10 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStrokes\/Min\u003c\/span\u003e\u003cb\u003e26\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-6010 60-Inch Compact Hydraulic Sheet Metal Shear, 10-Gauge Mild Steel, 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-6010 is a compact hydraulic sheet metal shear with a 60 in. maximum shear length. It is rated for 10 ga. mild steel or 13 ga. stainless steel and runs on 220V three-phase power.\u003c\/p\u003e\n\u003cp\u003eIt cycles at 26 strokes per minute and takes material down to 24 ga. Front and back gates are 24 in. long, the blade angle is 1 degree, and the hydraulic reservoir holds 17 gal.\u003c\/p\u003e\n\u003ch4\u003eThree Operating Modes\u003c\/h4\u003e\n\u003cp\u003eSingle stroke, inch (step-down with automatic return at the bottom) and auto, which repeats while the foot pedal is held.\u003c\/p\u003e\n\u003ch4\u003eGuarded Hold-Downs\u003c\/h4\u003e\n\u003cp\u003eSpring-loaded hold-downs with urethane pads sit under a protective cover with a clear plastic finger guard.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH6010_IMG_MAIN.jpg?v=1793161636\u0026amp;width=1200\" alt=\"Baileigh SH-6010 hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"1200\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e60 in. shear length\u003c\/b\u003e\u003cspan\u003efor sheets up to 5 ft wide\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e10 ga. mild steel\u003c\/b\u003e\u003cspan\u003e13 ga. stainless, 24 ga. minimum\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e220V three phase\u003c\/b\u003e\u003cspan\u003e60Hz supply\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e26 strokes per minute\u003c\/b\u003e\u003cspan\u003esingle, inch and auto modes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMulti-edge blades\u003c\/b\u003e\u003cspan\u003e2 usable edges on top, 4 on the bottom blade\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManual back gauge\u003c\/b\u003e\u003cspan\u003ehand wheel, scale and dial indicator\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFoot pedal with E-stop\u003c\/b\u003e\u003cspan\u003eon a separate pedestal\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront material supports\u003c\/b\u003e\u003cspan\u003eincluded with the machine\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-6010 \/ BA9-1007167\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower requirements\u003c\/td\u003e\n\u003ctd\u003e220V \/ 3Ph \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shear length\u003c\/td\u003e\n\u003ctd\u003e60 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, mild steel\u003c\/td\u003e\n\u003ctd\u003e10 ga. (based on 64,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, stainless steel\u003c\/td\u003e\n\u003ctd\u003e13 ga. (based on 100,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle\u003c\/td\u003e\n\u003ctd\u003e1°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold-downs\u003c\/td\u003e\n\u003ctd\u003eSpring-loaded with urethane pads, clear finger guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eManual, hand wheel with scale and dial indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e17 gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e84 x 36 x 56 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e3,200 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003ePedestal with foot pedal and E-stop switch, manual back gauge with mounting washers and bolts, front material supports, toolbox (lever grease gun, 300 mm adjustable wrench, 6 x 100 mm Phillips screwdriver, 10-piece metric hex wrench set from 1.5 to 10 mm, 3 cans of touch-up paint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer, per the manual); replacement blades are sold by Baileigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325414141\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/3f699600b3578859\/original\/SH_6010_02_2018_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-6010 Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-6010 need?\u003c\/summary\u003e\u003cp\u003e220V, three phase, 60Hz. The customer supplies the power cord, and the manual requires the machine to be properly grounded.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the cutting capacity?\u003c\/summary\u003e\u003cp\u003eUp to 10 ga. mild steel or 13 ga. stainless steel over the full 60 in. length, and down to 24 ga.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is included?\u003c\/summary\u003e\u003cp\u003eThe foot pedal pedestal with E-stop, manual back gauge, front material supports and a toolbox with a grease gun, wrenches, screwdriver, hex keys and touch-up paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year from Baileigh. Hydraulic components carry their manufacturer's warranty, and included die sets, tooling and blades are covered for 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861520843054,"sku":"BA9-1007167","price":24089.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH6010_IMG_MAIN.jpg?v=1793161636"},{"product_id":"baileigh-sh-8010-80-inch-compact-hydraulic-shear-10-gauge-mild-steel-5-hp-220v-3ph","title":"Baileigh SH-8010 80-Inch Compact Hydraulic Shear, 10-Gauge Mild Steel, 5 HP 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e80\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e10 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMotor\u003c\/span\u003e\u003cb\u003e5 HP\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-8010 80-Inch Compact Hydraulic Shear, 10-Gauge Mild Steel, 5 HP 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-8010 is a compact hydraulic shear with an 80 in. maximum shear length. It is rated for 10 ga. mild steel or 13 ga. stainless steel and is driven by a 5 HP motor on 220V three-phase power.\u003c\/p\u003e\n\u003cp\u003eIt runs at 24 strokes per minute and handles material down to 24 ga. Front and back gates are 24 in., the blade angle is 1 degree, and the hydraulic system holds 26.4 gal. of oil.\u003c\/p\u003e\n\u003ch4\u003eThree Operating Modes\u003c\/h4\u003e\n\u003cp\u003eInch, single and auto modes are chosen on the control panel; auto keeps cycling while the foot pedal is held.\u003c\/p\u003e\n\u003ch4\u003eMulti-Edge Blades\u003c\/h4\u003e\n\u003cp\u003eThe blades are high carbon, high chrome alloy tool steel, with two usable edges on the top blade and four on the bottom.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/1007197__hydraulic_shear_sh8010_jpg.jpg?v=1793161653\u0026amp;width=1200\" alt=\"Baileigh SH-8010 hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"940\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e80 in. shear length\u003c\/b\u003e\u003cspan\u003efor sheets up to 80 in. wide\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e10 ga. mild steel\u003c\/b\u003e\u003cspan\u003e13 ga. stainless, 24 ga. minimum\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e5 HP, 220V 3Ph\u003c\/b\u003e\u003cspan\u003e22.5 amp motor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e24 strokes per minute\u003c\/b\u003e\u003cspan\u003esingle, inch and auto modes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHold-downs with pads\u003c\/b\u003e\u003cspan\u003espring-assisted hold-down assembly\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManual back gauge\u003c\/b\u003e\u003cspan\u003ehand wheel with scale on the gauge rod\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFoot pedal with E-stop\u003c\/b\u003e\u003cspan\u003eon a separate pedestal\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront material supports\u003c\/b\u003e\u003cspan\u003eincluded with the machine\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-8010 \/ BA9-1007197\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e5 HP (3.67 kW), 220V \/ 3Ph \/ 60Hz, 22.5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shear length\u003c\/td\u003e\n\u003ctd\u003e80 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, mild steel\u003c\/td\u003e\n\u003ctd\u003e10 ga. (based on 64,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, stainless steel\u003c\/td\u003e\n\u003ctd\u003e13 ga. (based on 100,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle\u003c\/td\u003e\n\u003ctd\u003e1°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eManual, hand wheel with scale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e26.4 gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e104 x 36 x 53 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e4,000 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003ePedestal with foot pedal and E-stop switch, manual back gauge with mounting washers and bolts, front material supports, toolbox (lever grease gun, 300 mm adjustable wrench, 6 x 100 mm Phillips screwdriver, 10-piece metric hex wrench set from 1.5 to 10 mm, 3 cans of touch-up paint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer, per the manual); replacement blades are sold by Baileigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325414417\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/503ce306fa52815e\/original\/SH-8010-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-8010 Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-8010 need?\u003c\/summary\u003e\u003cp\u003e220V, three phase, 60Hz. The 5 HP motor draws 22.5 amps. The customer supplies the power cord.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow much can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 10 ga. mild steel or 13 ga. stainless steel across 80 in., and as thin as 24 ga.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is included?\u003c\/summary\u003e\u003cp\u003eThe foot pedal pedestal with E-stop, manual back gauge, front material supports and a toolbox with a grease gun, wrenches, screwdriver, hex keys and touch-up paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year from Baileigh. Hydraulic components carry their manufacturer's warranty, and included die sets, tooling and blades are covered for 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861522743598,"sku":"BA9-1007197","price":26069.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/1007197__hydraulic_shear_sh8010_jpg.jpg?v=1793161653"},{"product_id":"baileigh-sh-12014-120-inch-hydraulic-sheet-metal-shear-14-gauge-mild-steel-7-5-hp-220v-3ph","title":"Baileigh SH-12014 120-Inch Hydraulic Sheet Metal Shear, 14-Gauge Mild Steel, 7.5 HP 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e120\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e14 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMotor\u003c\/span\u003e\u003cb\u003e7.5 HP\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-12014 120-Inch Hydraulic Sheet Metal Shear, 14-Gauge Mild Steel, 7.5 HP 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-12014 is a hydraulic sheet metal shear with a 120 in. (10 ft) maximum shear length. It cuts up to 14 ga. mild steel or 18 ga. stainless steel and is driven by a 7.5 HP motor on 220V three-phase power.\u003c\/p\u003e\n\u003cp\u003eIt runs at 20 strokes per minute and takes material down to 24 ga. Front and back gates are 24 in. long, the blade angle is 2 degrees, and the hydraulic oil capacity is 17 gal.\u003c\/p\u003e\n\u003ch4\u003eThree Operating Modes\u003c\/h4\u003e\n\u003cp\u003eSingle stroke, inch (step-down) and auto, where the blade cycles continuously while the foot pedal is held.\u003c\/p\u003e\n\u003ch4\u003eMulti-Edge Blades\u003c\/h4\u003e\n\u003cp\u003eHigh carbon, high chrome alloy tool steel blades, with two usable edges on the top blade and four on the bottom blade.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH12014_IMG_MAIN.jpg?v=1793161674\u0026amp;width=1200\" alt=\"Baileigh SH-12014 hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"725\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e120 in. shear length\u003c\/b\u003e\u003cspan\u003ecuts full 10 ft sheets\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e14 ga. mild steel\u003c\/b\u003e\u003cspan\u003e18 ga. stainless, 24 ga. minimum\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7.5 HP, 220V 3Ph\u003c\/b\u003e\u003cspan\u003e27.5 amp motor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e20 strokes per minute\u003c\/b\u003e\u003cspan\u003esingle, inch and auto modes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHold-downs with urethane pads\u003c\/b\u003e\u003cspan\u003eclamp the sheet for the cut\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManual back gauge\u003c\/b\u003e\u003cspan\u003ehand wheel, scale with pointer and locking handle\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo E-stop buttons\u003c\/b\u003e\u003cspan\u003eon the enclosure and the foot pedestal\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClear finger guards\u003c\/b\u003e\u003cspan\u003efitted for operator safety\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-12014 \/ BA9-1007071\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e7.5 HP (5.59 kW), 220V \/ 3Ph \/ 60Hz, 27.5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shear length\u003c\/td\u003e\n\u003ctd\u003e120 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, mild steel\u003c\/td\u003e\n\u003ctd\u003e14 ga. (based on 64,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, stainless steel\u003c\/td\u003e\n\u003ctd\u003e18 ga. (based on 100,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle\u003c\/td\u003e\n\u003ctd\u003e2°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold-downs\u003c\/td\u003e\n\u003ctd\u003eUrethane pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eManual, hand wheel with scale and locking handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e17 gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e145 x 45 x 60 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e6,600 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003ePedestal with foot pedal and E-stop switch, manual back gauge with mounting washers and bolts, front material supports, toolbox (lever grease gun, 300 mm adjustable wrench, 6 x 100 mm Phillips screwdriver, 10-piece metric hex wrench set from 1.5 to 10 mm, 3 cans of touch-up paint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer, per the manual); replacement blades are sold by Baileigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325413311\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/61fcdd22102f0bd5\/original\/SH_12014_12_2018_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-12014 Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-12014 need?\u003c\/summary\u003e\u003cp\u003e220V, three phase, 60Hz, on a dedicated circuit. The 7.5 HP motor draws 27.5 amps, and the customer supplies the power cord.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the cutting capacity?\u003c\/summary\u003e\u003cp\u003eUp to 14 ga. mild steel or 18 ga. stainless steel across the full 120 in., and down to 24 ga.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat floor does it need?\u003c\/summary\u003e\u003cp\u003eThe manual calls for a solid concrete floor at least 4 in. thick, with 6 in. preferred.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is included?\u003c\/summary\u003e\u003cp\u003eThe foot pedal pedestal with E-stop, manual back gauge, front material supports and a toolbox with a grease gun, wrenches, screwdriver, hex keys and touch-up paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year from Baileigh. Hydraulic components carry their manufacturer's warranty, and included die sets, tooling and blades are covered for 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861523366190,"sku":"BA9-1007071","price":24999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH12014_IMG_MAIN.jpg?v=1793161674"},{"product_id":"baileigh-sh-10010-100-inch-hydraulic-sheet-metal-shear-10-gauge-mild-steel-7-5-hp-220v-3ph","title":"Baileigh SH-10010 100-Inch Hydraulic Sheet Metal Shear, 10-Gauge Mild Steel, 7.5 HP 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e100\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e10 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMotor\u003c\/span\u003e\u003cb\u003e7.5 HP\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-10010 100-Inch Hydraulic Sheet Metal Shear, 10-Gauge Mild Steel, 7.5 HP 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-10010 is a hydraulic sheet metal shear with a 100 in. maximum shear length. It is rated for 10 ga. mild steel or 13 ga. stainless steel and is powered by a 7.5 HP motor on 220V three-phase power.\u003c\/p\u003e\n\u003cp\u003eIt cycles at 22 strokes per minute and accepts material down to 24 ga. Front and back gates are 24 in. long, the blade angle is 2 degrees, and the hydraulic system holds 17 gal.\u003c\/p\u003e\n\u003ch4\u003eThree Operating Modes\u003c\/h4\u003e\n\u003cp\u003eSingle cycle per pedal press, inch (step-down with automatic return) and auto, which keeps cutting while the pedal is held.\u003c\/p\u003e\n\u003ch4\u003eMulti-Edge Blades\u003c\/h4\u003e\n\u003cp\u003eHigh carbon, high chrome alloy tool steel blades: two usable edges on the top blade, four on the bottom.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH10010_IMG_MAIN.jpg?v=1793161675\u0026amp;width=1200\" alt=\"Baileigh SH-10010 hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"832\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e100 in. shear length\u003c\/b\u003e\u003cspan\u003efor sheets up to 100 in. wide\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e10 ga. mild steel\u003c\/b\u003e\u003cspan\u003e13 ga. stainless, 24 ga. minimum\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7.5 HP, 220V 3Ph\u003c\/b\u003e\u003cspan\u003e27.5 amp motor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e22 strokes per minute\u003c\/b\u003e\u003cspan\u003esingle, inch and auto modes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHold-downs with urethane pads\u003c\/b\u003e\u003cspan\u003espring-assisted, with finger guard\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManual back gauge\u003c\/b\u003e\u003cspan\u003ehand wheel with scale and indicator\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo E-stop buttons\u003c\/b\u003e\u003cspan\u003eon the cabinet and the foot pedestal\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial support arms\u003c\/b\u003e\u003cspan\u003ewith front and side gauges\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-10010 \/ BA9-1007037\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e7.5 HP (5.59 kW), 220V \/ 3Ph \/ 60Hz, 27.5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shear length\u003c\/td\u003e\n\u003ctd\u003e100 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, mild steel\u003c\/td\u003e\n\u003ctd\u003e10 ga. (based on 64,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, stainless steel\u003c\/td\u003e\n\u003ctd\u003e13 ga. (based on 100,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gate length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle\u003c\/td\u003e\n\u003ctd\u003e2°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eManual, hand wheel with scale and indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e17 gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e125 x 45 x 60 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e6,000 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003ePedestal with foot pedal and E-stop switch, manual back gauge with mounting washers and bolts, front material supports, toolbox (lever grease gun, 300 mm adjustable wrench, 6 x 100 mm Phillips screwdriver, 10-piece metric hex wrench set from 1.5 to 10 mm, 3 cans of touch-up paint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer, per the manual); replacement blades are sold by Baileigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325412994\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/618b0f7209f53427\/original\/SH_10010_12_2018_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-10010 Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-10010 need?\u003c\/summary\u003e\u003cp\u003e220V, three phase, 60Hz, on a dedicated circuit. The 7.5 HP motor draws 27.5 amps, and the customer supplies the power cord.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the cutting capacity?\u003c\/summary\u003e\u003cp\u003eUp to 10 ga. mild steel or 13 ga. stainless steel across 100 in., down to 24 ga.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is included?\u003c\/summary\u003e\u003cp\u003eThe foot pedal pedestal with E-stop, manual back gauge, front material supports and a toolbox with a grease gun, wrenches, screwdriver, hex keys and touch-up paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year from Baileigh. Hydraulic components carry their manufacturer's warranty, and included die sets, tooling and blades are covered for 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861523398958,"sku":"BA9-1007037","price":34400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH10010_IMG_MAIN.jpg?v=1793161675"},{"product_id":"baileigh-sh-12010-120-inch-hydraulic-sheet-metal-shear-10-gauge-mild-steel-7-5-hp-220v-3ph","title":"Baileigh SH-12010 120-Inch Hydraulic Sheet Metal Shear, 10-Gauge Mild Steel, 7.5 HP 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e120\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e10 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMotor\u003c\/span\u003e\u003cb\u003e7.5 HP\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-12010 120-Inch Hydraulic Sheet Metal Shear, 10-Gauge Mild Steel, 7.5 HP 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-12010 is a hydraulic sheet metal shear with a 120 in. (10 ft) maximum shear length. It cuts up to 10 ga. mild steel or 13 ga. stainless steel and runs a 7.5 HP motor on 220V three-phase power.\u003c\/p\u003e\n\u003cp\u003eIt cycles at 20 strokes per minute and handles material down to 24 ga. The back gauge length is 24 in., the front material support extends to 21-5\/8 in., the blade angle is 2 degrees, and the hydraulic system holds 20 gal.\u003c\/p\u003e\n\u003ch4\u003eThree Operating Modes\u003c\/h4\u003e\n\u003cp\u003eA three-position selector sets single, inch or auto operation from the foot pedal.\u003c\/p\u003e\n\u003ch4\u003eMulti-Edge Blades\u003c\/h4\u003e\n\u003cp\u003eThe upper blade has two usable edges and the lower blade has four, both in high carbon, high chrome alloy tool steel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH12010_IMG_MAIN.jpg?v=1793161676\u0026amp;width=1200\" alt=\"Baileigh SH-12010 hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"1200\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e120 in. shear length\u003c\/b\u003e\u003cspan\u003ecuts full 10 ft sheets\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e10 ga. mild steel\u003c\/b\u003e\u003cspan\u003e13 ga. stainless, 24 ga. minimum\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7.5 HP, 220V 3Ph\u003c\/b\u003e\u003cspan\u003e27.5 amp motor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e20 strokes per minute\u003c\/b\u003e\u003cspan\u003esingle, inch and auto modes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManual back gauge\u003c\/b\u003e\u003cspan\u003e24 in., hand wheel with scale and dial indicator\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront material support\u003c\/b\u003e\u003cspan\u003eextends to 21-5\/8 in.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFoot pedal with E-stop\u003c\/b\u003e\u003cspan\u003eon a separate pedestal\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e20 gal. hydraulic reservoir\u003c\/b\u003e\u003cspan\u003ehydraulic oil capacity\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-12010 \/ BA9-1007063\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e7.5 HP (5.59 kW), 220V \/ 3Ph \/ 60Hz, 27.5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shear length\u003c\/td\u003e\n\u003ctd\u003e120 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, mild steel\u003c\/td\u003e\n\u003ctd\u003e10 ga. (based on 64,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, stainless steel\u003c\/td\u003e\n\u003ctd\u003e13 ga. (based on 100,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront material support (full extension)\u003c\/td\u003e\n\u003ctd\u003e21-5\/8 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge length\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle\u003c\/td\u003e\n\u003ctd\u003e2°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eManual, hand wheel with scale and dial indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e20 gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e145 x 45 x 60 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e6,600 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eBack gauge with mounting washers and bolts, pedestal with foot pedal and E-stop switch, toolbox (lever grease gun, 300 mm adjustable wrench, 6 x 100 mm Phillips screwdriver, 10-piece metric hex wrench set from 1.5 to 10 mm, 3 cans of touch-up paint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer, per the manual); replacement blades are sold by Baileigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325413243\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/f47b1e60160d01d\/original\/SH_12010_11_2020_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-12010 Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-12010 need?\u003c\/summary\u003e\u003cp\u003e220V, three phase, 60Hz. The 7.5 HP motor draws 27.5 amps. The customer supplies the power cord, and the manual calls for a time-delay fuse or breaker.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the cutting capacity?\u003c\/summary\u003e\u003cp\u003eUp to 10 ga. mild steel or 13 ga. stainless steel over the full 120 in. length, down to 24 ga.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is included?\u003c\/summary\u003e\u003cp\u003eThe back gauge with its mounting hardware, the foot pedal pedestal with E-stop and a toolbox with a grease gun, wrenches, screwdriver, hex keys and touch-up paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year from Baileigh. Hydraulic components carry their manufacturer's warranty, and included die sets, tooling and blades are covered for 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861523431726,"sku":"BA9-1007063","price":35594.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH12010_IMG_MAIN.jpg?v=1793161676"},{"product_id":"baileigh-sh-5210-hd-52-inch-heavy-duty-hydraulic-shear-10-gauge-mild-steel-7-5-hp-220v-3ph","title":"Baileigh SH-5210-HD 52-Inch Heavy-Duty Hydraulic Shear, 10-Gauge Mild Steel, 7.5 HP 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e52\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHeavy-Duty Hydraulic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e10 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStrokes\/Min\u003c\/span\u003e\u003cb\u003e35-47\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-5210-HD 52-Inch Heavy-Duty Hydraulic Shear, 10-Gauge Mild Steel, 7.5 HP 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-5210-HD is a heavy-duty hydraulic shear with a 52 in. maximum shear length. It cuts up to 10 ga. mild steel or 13 ga. stainless steel and runs a 7.5 HP motor on 220V three-phase power.\u003c\/p\u003e\n\u003cp\u003eStroke rate is 35 to 47 per minute, minimum material is 24 ga., and the hydraulic system holds 28 gal. The front gate is 39.37 in. and the back gate is 23.62 in.\u003c\/p\u003e\n\u003ch4\u003eHydraulic Hold-Downs\u003c\/h4\u003e\n\u003cp\u003eEight hydraulic hold-down cylinders run along the blade to clamp the sheet before each cut.\u003c\/p\u003e\n\u003ch4\u003eAdjustable Rake and Blade Gap\u003c\/h4\u003e\n\u003cp\u003eBlade angle is adjustable from 1\/2 to 2 degrees with pushbuttons, and blade clearance is set with a manual lever.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH5210HD_IMG_MAIN.jpg?v=1793161693\u0026amp;width=1200\" alt=\"Baileigh SH-5210-HD hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"1200\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e52 in. shear length\u003c\/b\u003e\u003cspan\u003e10 ga. mild steel, 13 ga. stainless\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7.5 HP, 220V 3Ph\u003c\/b\u003e\u003cspan\u003e20 amp motor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e35-47 strokes per minute\u003c\/b\u003e\u003cspan\u003esingle, inch and auto modes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e8 hydraulic hold-downs\u003c\/b\u003e\u003cspan\u003espaced along the blade length\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRake angle 1\/2 to 2 degrees\u003c\/b\u003e\u003cspan\u003eset by pushbuttons at the control\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBlade gap lever\u003c\/b\u003e\u003cspan\u003emanual clearance adjustment\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCut-length timer and counter\u003c\/b\u003e\u003cspan\u003eon the electrical enclosure\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSquaring arm and supports\u003c\/b\u003e\u003cspan\u003ewith scale and material stops\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-5210-HD \/ BA9-1007122\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e7.5 HP (5.59 kW), 220V \/ 3Ph \/ 60Hz, 20 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shear length\u003c\/td\u003e\n\u003ctd\u003e52 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, mild steel\u003c\/td\u003e\n\u003ctd\u003e10 ga. (based on 64,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, stainless steel\u003c\/td\u003e\n\u003ctd\u003e13 ga. (based on 100,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e35-47\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gate length\u003c\/td\u003e\n\u003ctd\u003e39.37 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gate length\u003c\/td\u003e\n\u003ctd\u003e23.62 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle (rake)\u003c\/td\u003e\n\u003ctd\u003e1\/2° to 2°, pushbutton adjusted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade clearance\u003c\/td\u003e\n\u003ctd\u003eManual adjustment lever\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold-downs\u003c\/td\u003e\n\u003ctd\u003e8 hydraulic hold-down cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eManual, hand wheel with scale and indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e28 gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e91 x 54 x 65 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e3,960 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eManual back gauge with mounting washers and bolts, squaring arm with scale and material stop, front support arm with material stop, pedestal with foot pedal and E-stop switch, 4 round leveling pads, toolbox (lever grease gun, 300 mm adjustable wrench, 6 x 100 mm Phillips screwdriver, 10-piece metric hex wrench set from 1.5 to 10 mm, 3 cans of touch-up paint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer, per the manual); replacement blades are sold by Baileigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325413700\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/71f062bd90e2a0ab\/original\/SH_5210HD_1of2_11_2018_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-5210-HD Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-5210-HD need?\u003c\/summary\u003e\u003cp\u003e220V, three phase, 60Hz. The 7.5 HP motor draws 20 amps. The customer supplies the power cord.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow is it different from the standard SH-5210?\u003c\/summary\u003e\u003cp\u003eIt adds eight hydraulic hold-downs, an adjustable rake angle (1\/2 to 2 degrees), a blade-clearance lever, a 39.37 in. front gate and a 35-47 stroke-per-minute range.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is included?\u003c\/summary\u003e\u003cp\u003eThe manual back gauge, squaring arm with scale and stop, front support arm with stop, foot pedal pedestal with E-stop, 4 leveling pads and a toolbox.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year from Baileigh. Hydraulic components carry their manufacturer's warranty, and included die sets, tooling and blades are covered for 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861524873518,"sku":"BA9-1007122","price":34199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH5210HD_IMG_MAIN.jpg?v=1793161693"},{"product_id":"baileigh-sh-120250-hd-122-inch-hydraulic-plate-shear-with-nc-back-gauge-1-4-inch-mild-steel-220v-3ph","title":"Baileigh SH-120250-HD 122-Inch Hydraulic Plate Shear with NC Back Gauge, 1\/4-Inch Mild Steel, 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e122\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear, NC Back Gauge\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e1\/4 in.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStainless\u003c\/span\u003e\u003cb\u003e0.118 in.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-120250-HD 122-Inch Hydraulic Plate Shear with NC Back Gauge, 1\/4-Inch Mild Steel, 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-120250-HD is a hydraulic plate shear with a 122 in. shear length, rated for 1\/4 in. mild steel and 0.118 in. (3 mm) stainless steel. Its 10 HP main motor runs on 220V 3-phase power.\u003c\/p\u003e\n\u003cp\u003eIt makes 14 to 45 strokes per minute with up to 32,597 lbf of cutting force. A motorized back gauge, run by a YSD6000s numerical control, positions from 0.4 to 29.5 in., and the shear ships at 14,560 lb.\u003c\/p\u003e\n\u003ch4\u003eProgrammable Back Gauge\u003c\/h4\u003e\n\u003cp\u003eThe control runs single-step or multi-step programs of up to 25 steps with a workpiece counter, and a variable frequency drive slows the gauge as it nears the target.\u003c\/p\u003e\n\u003ch4\u003eRake and Gap Adjustment\u003c\/h4\u003e\n\u003cp\u003eThe blade rake is set with pushbuttons and read on a digital display, and the blade gap is set with a hand wheel and pointer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH_120250_HD_IMG_MAIN.jpg?v=1793161698\u0026amp;width=1200\" alt=\"Baileigh SH-120250-HD hydraulic plate shear main view\" loading=\"lazy\" width=\"1200\" height=\"795\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e122 in. shear length\u003c\/b\u003e\u003cspan\u003e3,100 mm cut\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1\/4 in. mild steel\u003c\/b\u003e\u003cspan\u003erated on 64,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e0.118 in. stainless steel\u003c\/b\u003e\u003cspan\u003erated on 100,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e14 to 45 strokes per minute\u003c\/b\u003e\u003cspan\u003e8.25 in. maximum ram travel\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e32,597 lbf cutting force\u003c\/b\u003e\u003cspan\u003e2,175 PSI maximum hydraulic pressure\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMotorized NC back gauge\u003c\/b\u003e\u003cspan\u003e0.4 to 29.5 in. range\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHand wheel blade gap\u003c\/b\u003e\u003cspan\u003e0.002 to 0.024 in. clearance\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSafety equipment\u003c\/b\u003e\u003cspan\u003elight curtain on the rear guards, E-stop and front safety bar switch\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic Shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-120250-HD \/ BA9-1007078\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain motor\u003c\/td\u003e\n\u003ctd\u003e10 HP (7.5 kW), 220V \/ 3-phase \/ 60 Hz, 28 A at 1,740 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge motor\u003c\/td\u003e\n\u003ctd\u003e0.5 HP (0.37 kW), 220V \/ 3-phase \/ 60 Hz, 2 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower requirements\u003c\/td\u003e\n\u003ctd\u003e220V 3-phase 60 Hz; power cord supplied by the customer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear length\u003c\/td\u003e\n\u003ctd\u003e122 in. (3,100 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMild steel capacity\u003c\/td\u003e\n\u003ctd\u003e0.25 in. (6.35 mm), based on 64,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless steel capacity\u003c\/td\u003e\n\u003ctd\u003e0.118 in. (3 mm), based on 100,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum material thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga. (0.607 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e14 to 45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum ram travel\u003c\/td\u003e\n\u003ctd\u003e8.25 in. (210 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum cutting force\u003c\/td\u003e\n\u003ctd\u003e32,597 lbf (145 kN)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eMotorized, YSD6000s NC control, 0.4 to 29.5 in. (10 to 750 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade clearance\u003c\/td\u003e\n\u003ctd\u003e0.002 to 0.024 in. (0.05 to 0.60 mm), manual hand wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRake angle\u003c\/td\u003e\n\u003ctd\u003ePushbutton adjustment with digital readout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum hydraulic pressure\u003c\/td\u003e\n\u003ctd\u003e2,175 PSI (15 MPa)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic pump flow\u003c\/td\u003e\n\u003ctd\u003e10 GPM (38 L\/min)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic reservoir\u003c\/td\u003e\n\u003ctd\u003e29 gal. (110 L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions\u003c\/td\u003e\n\u003ctd\u003e159.25 x 112.5 x 69 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e14,560 lb (6,604 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eFoot pedal, squaring arm, left and right back guards with support pads, light curtain emitters and reflectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325413380\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/cc645459ecf7d65\/original\/SH_120250_HD_1_of_2_10_2019_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-120250-HD Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-120250-HD need?\u003c\/summary\u003e\u003cp\u003e220V 3-phase 60 Hz. The 10 HP main motor draws 28 A and the back gauge motor 2 A. The manual calls for a time-delay fuse or breaker, and the customer supplies the power cord.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow does the back gauge work?\u003c\/summary\u003e\u003cp\u003eIt is motorized and run by a YSD6000s numerical control, with a range of 0.4 to 29.5 in. It can run single-step or multi-step programs of up to 25 steps.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow thick a sheet can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 1\/4 in. mild steel or 0.118 in. stainless steel across 122 in., and down to 24 gauge.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow is it shipped?\u003c\/summary\u003e\u003cp\u003eShipping weight is 14,560 lb, and the shipping dimensions are 159.25 x 112.5 x 69 in.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat warranty does it carry?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861525102894,"sku":"BA9-1007078","price":62999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH_120250_HD_IMG_MAIN.jpg?v=1793161698"},{"product_id":"baileigh-sh-5208-hd-52-inch-heavy-duty-hydraulic-shear-8-gauge-mild-steel-220v-3ph","title":"Baileigh SH-5208-HD 52-Inch Heavy-Duty Hydraulic Shear, 8-Gauge Mild Steel, 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e52\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHeavy-Duty Hydraulic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e8 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStrokes\/Min\u003c\/span\u003e\u003cb\u003e30-42\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-5208-HD 52-Inch Heavy-Duty Hydraulic Shear, 8-Gauge Mild Steel, 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-5208-HD is a heavy-duty hydraulic shear with a 52 in. maximum shear length. It is rated for 8 ga. mild steel or 12 ga. stainless steel and runs on 220V three-phase power.\u003c\/p\u003e\n\u003cp\u003eIt cycles at 30 to 42 strokes per minute and handles material down to 24 ga. The front gate is 39.37 in., the back gate is 23.62 in., and the hydraulic system holds 28 gal.\u003c\/p\u003e\n\u003ch4\u003eHydraulic Hold-Downs\u003c\/h4\u003e\n\u003cp\u003eEight hydraulic hold-down cylinders with rubber pads clamp the sheet along the blade.\u003c\/p\u003e\n\u003ch4\u003eVariable Rake and Blade Gap\u003c\/h4\u003e\n\u003cp\u003eThe blade angle adjusts from 1\/2 to 2 degrees with increase\/decrease pushbuttons, and a manual handle sets blade clearance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/1007099__sh5208hd_web_jpg.jpg?v=1793161712\u0026amp;width=1200\" alt=\"Baileigh SH-5208-HD hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"1200\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e52 in. shear length\u003c\/b\u003e\u003cspan\u003e8 ga. mild steel, 12 ga. stainless\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e220V three phase\u003c\/b\u003e\u003cspan\u003e60Hz supply\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e30-42 strokes per minute\u003c\/b\u003e\u003cspan\u003esingle, inch and auto modes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e8 hydraulic hold-downs\u003c\/b\u003e\u003cspan\u003ewith rubber pads\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRake angle 1\/2 to 2 degrees\u003c\/b\u003e\u003cspan\u003epushbutton adjustment\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBlade gap handle\u003c\/b\u003e\u003cspan\u003emanual clearance adjustment\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCycle counter and cut-length timer\u003c\/b\u003e\u003cspan\u003eon the control enclosure\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eElectro-welded frame\u003c\/b\u003e\u003cspan\u003eheavy-duty welded construction\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-5208-HD \/ BA9-1007099\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower requirements\u003c\/td\u003e\n\u003ctd\u003e220V \/ 3Ph \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shear length\u003c\/td\u003e\n\u003ctd\u003e52 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, mild steel\u003c\/td\u003e\n\u003ctd\u003e8 ga. (based on 64,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, stainless steel\u003c\/td\u003e\n\u003ctd\u003e12 ga. (based on 100,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e30-42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gate length\u003c\/td\u003e\n\u003ctd\u003e39.37 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gate length\u003c\/td\u003e\n\u003ctd\u003e23.62 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle (rake)\u003c\/td\u003e\n\u003ctd\u003e1\/2° to 2°, pushbutton adjusted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade clearance\u003c\/td\u003e\n\u003ctd\u003eManual adjustment lever\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold-downs\u003c\/td\u003e\n\u003ctd\u003e8 hydraulic cylinders with rubber pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eManual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e28 gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e91 x 54 x 65 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e4,400 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eManual back gauge with mounting washers and bolts, squaring arm with scale and material stop, front support arm with material stop, pedestal with foot pedal and E-stop switch, 4 round leveling pads, toolbox (lever grease gun, 300 mm adjustable wrench, 6 x 100 mm Phillips screwdriver, 10-piece metric hex wrench set from 1.5 to 10 mm, 3 cans of touch-up paint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer, per the manual); replacement blades are sold by Baileigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325413496\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/6388635a28e9089c\/original\/SH-5208HD-1-of-2-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-5208-HD Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-5208-HD need?\u003c\/summary\u003e\u003cp\u003e220V, three phase, 60Hz. The customer supplies the power cord, and the manual calls for a time-delay fuse or breaker rated slightly above full-load current.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow thick a sheet can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 8 ga. mild steel or 12 ga. stainless steel across 52 in., and down to 24 ga.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is included?\u003c\/summary\u003e\u003cp\u003eThe manual back gauge, squaring arm with scale and stop, front support arm with stop, foot pedal pedestal with E-stop, 4 leveling pads and a toolbox.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year from Baileigh. Hydraulic components carry their manufacturer's warranty, and included die sets, tooling and blades are covered for 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861527265582,"sku":"BA9-1007099","price":38389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/1007099__sh5208hd_web_jpg.jpg?v=1793161712"},{"product_id":"baileigh-sh-8010-hd-80-inch-heavy-duty-hydraulic-shear-10-gauge-mild-steel-7-5-hp-220v-3ph","title":"Baileigh SH-8010-HD 80-Inch Heavy-Duty Hydraulic Shear, 10-Gauge Mild Steel, 7.5 HP 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e80\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHeavy-Duty Hydraulic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e10 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStrokes\/Min\u003c\/span\u003e\u003cb\u003e32-44\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-8010-HD 80-Inch Heavy-Duty Hydraulic Shear, 10-Gauge Mild Steel, 7.5 HP 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-8010-HD is a heavy-duty hydraulic shear with an 80 in. maximum shear length. It cuts up to 10 ga. mild steel or 13 ga. stainless steel and is driven by a 7.5 HP motor on 220V three-phase power.\u003c\/p\u003e\n\u003cp\u003eIt runs at 32 to 44 strokes per minute. The front gate is 39.37 in., the back gate is 23.62 in., and the hydraulic system holds 35 gal. It ships complete in one crate.\u003c\/p\u003e\n\u003ch4\u003e12 Hydraulic Hold-Downs\u003c\/h4\u003e\n\u003cp\u003eTwelve hydraulic hold-down cylinders with rubber pads clamp the sheet across the full 80 in. length.\u003c\/p\u003e\n\u003ch4\u003eVariable Rake and Shadow Line\u003c\/h4\u003e\n\u003cp\u003eThe blade angle adjusts from 1\/2 to 2 degrees with pushbuttons, and a 4 ft fluorescent lamp casts a shadow line for lining up the cut.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH8010HD_IMG_MAIN.jpg?v=1793161732\u0026amp;width=1200\" alt=\"Baileigh SH-8010-HD hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"864\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e80 in. shear length\u003c\/b\u003e\u003cspan\u003e10 ga. mild steel, 13 ga. stainless\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7.5 HP, 220V 3Ph\u003c\/b\u003e\u003cspan\u003e5.59 kW motor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e32-44 strokes per minute\u003c\/b\u003e\u003cspan\u003esingle, inch and auto modes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e12 hydraulic hold-downs\u003c\/b\u003e\u003cspan\u003ewith rubber pads\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRake angle 1\/2 to 2 degrees\u003c\/b\u003e\u003cspan\u003epushbutton adjustment\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBlade gap handle\u003c\/b\u003e\u003cspan\u003emanual clearance adjustment\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCut-length timer and cycle counter\u003c\/b\u003e\u003cspan\u003eon the electrical enclosure\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMulti-edge blades\u003c\/b\u003e\u003cspan\u003e2 usable edges top, 4 bottom\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-8010-HD \/ BA9-1007202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e7.5 HP (5.59 kW), 220V \/ 3Ph \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shear length\u003c\/td\u003e\n\u003ctd\u003e80 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, mild steel\u003c\/td\u003e\n\u003ctd\u003e10 ga. (based on 64,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thickness, stainless steel\u003c\/td\u003e\n\u003ctd\u003e13 ga. (based on 100,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e32-44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gate length\u003c\/td\u003e\n\u003ctd\u003e39.37 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gate length\u003c\/td\u003e\n\u003ctd\u003e23.62 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle (rake)\u003c\/td\u003e\n\u003ctd\u003e1\/2° to 2°, pushbutton adjusted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade clearance\u003c\/td\u003e\n\u003ctd\u003eManual adjustment lever\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold-downs\u003c\/td\u003e\n\u003ctd\u003e12 hydraulic cylinders with rubber pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eManual, with scale and indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic oil capacity\u003c\/td\u003e\n\u003ctd\u003e35 gal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e119 x 48 x 65 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e6,600 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eManual back gauge, squaring arm, material support arms, pedestal with foot pedal and E-stop, 4 round leveling pads, toolbox (lever grease gun, 300 mm adjustable wrench, 6 x 100 mm Phillips screwdriver, 10-piece metric hex wrench set from 1.5 to 10 mm, 3 cans of touch-up paint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003eReplacement blades (sold by Baileigh)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325414455\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/7a1b68415d0514d2\/original\/SH-8010-HD-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-8010-HD Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-8010-HD need?\u003c\/summary\u003e\u003cp\u003e220V, three phase, 60Hz, for the 7.5 HP motor. The manual describes wiring the three power leads to the R, S and T terminals, with the ground to E.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow thick a sheet can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 10 ga. mild steel or 13 ga. stainless steel across the full 80 in. length.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is included?\u003c\/summary\u003e\u003cp\u003eThe manual back gauge, squaring arm, material support arms, foot pedal pedestal with E-stop, 4 leveling pads and a toolbox.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year from Baileigh. Hydraulic components carry their manufacturer's warranty, and included die sets, tooling and blades are covered for 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861528772910,"sku":"BA9-1007202","price":42299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH8010HD_IMG_MAIN.jpg?v=1793161732"},{"product_id":"baileigh-sf-5216e-52-inch-manual-foot-stomp-shear-16-gauge-mild-steel-capacity","title":"Baileigh SF-5216E 52-Inch Manual Foot Stomp Shear, 16-Gauge Mild Steel Capacity","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e52\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eFoot Stomp Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e16 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStainless\u003c\/span\u003e\u003cb\u003e20 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SF-5216E 52-Inch Manual Foot Stomp Shear, 16-Gauge Mild Steel Capacity\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SF-5216E is a foot-operated sheet metal shear with a 52 in. maximum shear length. It needs no electrical power: stepping on the pedal lowers the hold-downs and then the top blade, leaving both hands free to guide the sheet.\u003c\/p\u003e\n\u003cp\u003eIt cuts up to 16 ga. mild steel or 20 ga. stainless steel and down to 24 ga. material. It has a 20 in. front gate and a 33 in. back gate, and the shipping weight is 1,199 lb.\u003c\/p\u003e\n\u003ch4\u003eHold-Down and Spring Return\u003c\/h4\u003e\n\u003cp\u003eA spring-loaded hold-down with a clear safety shield clamps the sheet before the cut, and dual return springs lift the top blade afterward.\u003c\/p\u003e\n\u003ch4\u003eGauging for Repeat Cuts\u003c\/h4\u003e\n\u003cp\u003eA graduated squaring guide keeps the sheet square, a back gauge stop with micro-adjusters sets repeat lengths, and a miter guide handles angled cuts on smaller stock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SF_5216E_IMG_DET1.jpg?v=1793161768\u0026amp;width=1200\" alt=\"Baileigh SF-5216E foot stomp shear detail view 1\" loading=\"lazy\" width=\"1200\" height=\"1200\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e52 in. shear length\u003c\/b\u003e\u003cspan\u003emaximum cut width\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e16 ga. mild steel\u003c\/b\u003e\u003cspan\u003ebased on 65,000 PSI tensile\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e20 ga. stainless steel\u003c\/b\u003e\u003cspan\u003ebased on 100,000 PSI tensile\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e24 ga. minimum thickness\u003c\/b\u003e\u003cspan\u003eper the manual\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e20 in. front gate, 33 in. back gate\u003c\/b\u003e\u003cspan\u003ematerial support and gauging\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBack gauge with micro-adjusters\u003c\/b\u003e\u003cspan\u003efor repeat cut lengths\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMiter guide included\u003c\/b\u003e\u003cspan\u003efor angled cuts on smaller stock\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFoot-operated\u003c\/b\u003e\u003cspan\u003eno electrical power required\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eFoot Shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSF-5216E \/ BA9-1007020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eManual (foot operated, no electrical power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Shear Length\u003c\/td\u003e\n\u003ctd\u003e52 in. (1321 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMild Steel Capacity\u003c\/td\u003e\n\u003ctd\u003e16 ga. (65,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless Steel Capacity\u003c\/td\u003e\n\u003ctd\u003e20 ga. (100,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Gate Length\u003c\/td\u003e\n\u003ctd\u003e20 in. (508 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack Gate Length\u003c\/td\u003e\n\u003ctd\u003e33 in. (838 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Angle\u003c\/td\u003e\n\u003ctd\u003e1°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlades\u003c\/td\u003e\n\u003ctd\u003eUpper blade with 2 cutting edges, lower blade with 1 cutting edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e66 x 30 x 46 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e1,110 lb (Baileigh listing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1,199 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eShear body, foot pedal, 2 pedal pivot shafts, miter guide, 2 back gauge shafts, 2 front arm extensions, 2 micro-adjuster assemblies, front stop, back gauge stop, hardware set, spare clevis and cotter pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325412840\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/479df0fc7d54a9bb\/original\/SF_5216E_01_2021_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SF-5216E Foot Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh foot shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the SF-5216E need power?\u003c\/summary\u003e\u003cp\u003eNo. It is foot operated; the pedal lowers the hold-downs and then the top blade.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 16 ga. mild steel (rated at 65,000 PSI tensile) or 20 ga. stainless steel (rated at 100,000 PSI tensile), and material as thin as 24 ga., across a 52 in. length.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I make repeat cuts?\u003c\/summary\u003e\u003cp\u003eSet the back gauge stop with its micro-adjusters for repeat lengths, use the graduated squaring guide for square cuts, and use the included miter guide for angled cuts on smaller stock.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat does it weigh?\u003c\/summary\u003e\u003cp\u003eThe manual lists a shipping weight of 1,199 lb and shipping dimensions of 66 x 30 x 46 in.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861530345774,"sku":"BA9-1007020","price":4199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SF_5216E_IMG_MAIN.jpg?v=1793161767"},{"product_id":"baileigh-sh-120500-hd-122-inch-hydraulic-shear-with-nc-back-gauge-1-2-inch-mild-steel-20-hp-220v-3ph","title":"Baileigh SH-120500-HD 122-Inch Hydraulic Shear with NC Back Gauge, 1\/2-Inch Mild Steel, 20 HP 220V 3Ph","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e122\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eHydraulic Shear, NC Back Gauge\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e1\/2 in.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStainless\u003c\/span\u003e\u003cb\u003e3\/8 in.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-120500-HD 122-Inch Hydraulic Shear with NC Back Gauge, 1\/2-Inch Mild Steel, 20 HP 220V 3Ph\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-120500-HD is a heavy-duty hydraulic shear with a 122 in. shear length, rated for 1\/2 in. mild steel and 0.375 in. (9.5 mm) stainless steel. Its 20 HP main motor runs on 220V 3-phase power.\u003c\/p\u003e\n\u003cp\u003eIt makes 7 to 35 strokes per minute with up to 130,389 lbf of cutting force. A motorized back gauge, run by a YSD6000s numerical control, positions from 0.4 to 39.3 in., and the shear ships at 19,181 lb.\u003c\/p\u003e\n\u003ch4\u003eProgrammable Back Gauge\u003c\/h4\u003e\n\u003cp\u003eThe control runs single-step or multi-step programs of up to 25 steps, and each step can repeat 1 to 99 times.\u003c\/p\u003e\n\u003ch4\u003eRake and Gap Adjustment\u003c\/h4\u003e\n\u003cp\u003eThe blade rake is set with pushbuttons and read on a digital display, and the blade gap is set with a hand wheel and pointer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH1205HD_IMG_MAIN.jpg?v=1793161809\u0026amp;width=1200\" alt=\"Baileigh SH-120500-HD hydraulic shear main view\" loading=\"lazy\" width=\"1200\" height=\"892\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e122 in. shear length\u003c\/b\u003e\u003cspan\u003e3,100 mm cut\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1\/2 in. mild steel\u003c\/b\u003e\u003cspan\u003erated on 64,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e3\/8 in. stainless steel\u003c\/b\u003e\u003cspan\u003erated on 100,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7 to 35 strokes per minute\u003c\/b\u003e\u003cspan\u003e6.5 in. maximum ram travel\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e130,389 lbf cutting force\u003c\/b\u003e\u003cspan\u003e3,190 PSI maximum hydraulic pressure\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMotorized NC back gauge\u003c\/b\u003e\u003cspan\u003e0.4 to 39.3 in. range\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHand wheel blade gap\u003c\/b\u003e\u003cspan\u003e0.002 to 0.024 in. clearance\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSafety equipment\u003c\/b\u003e\u003cspan\u003elight curtain on the rear guards, E-stop and front safety bar switch\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eHydraulic Shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-120500-HD \/ BA9-1007085\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain motor\u003c\/td\u003e\n\u003ctd\u003e20 HP (15 kW), 220V \/ 3-phase \/ 60 Hz, 54 A at 1,740 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge motor\u003c\/td\u003e\n\u003ctd\u003e0.5 HP (0.37 kW), 220V \/ 3-phase \/ 60 Hz, 2 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower requirements\u003c\/td\u003e\n\u003ctd\u003e220V 3-phase 60 Hz; power cord supplied by the customer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear length\u003c\/td\u003e\n\u003ctd\u003e122 in. (3,100 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMild steel capacity\u003c\/td\u003e\n\u003ctd\u003e0.500 in. (12.7 mm), based on 64,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless steel capacity\u003c\/td\u003e\n\u003ctd\u003e0.375 in. (9.5 mm), based on 100,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e7 to 35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum ram travel\u003c\/td\u003e\n\u003ctd\u003e6.5 in. (167 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum cutting force\u003c\/td\u003e\n\u003ctd\u003e130,389 lbf (580 kN)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge\u003c\/td\u003e\n\u003ctd\u003eMotorized, YSD6000s NC control, 0.4 to 39.3 in. (10 to 1,000 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSquaring arm\u003c\/td\u003e\n\u003ctd\u003e48 in., mounts on the right or left side, 4 bump stops (per Baileigh)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade clearance\u003c\/td\u003e\n\u003ctd\u003e0.002 to 0.024 in. (0.05 to 0.60 mm), manual hand wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRake angle\u003c\/td\u003e\n\u003ctd\u003ePushbutton adjustment with digital readout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum hydraulic pressure\u003c\/td\u003e\n\u003ctd\u003e3,190 PSI (22 MPa)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic pump flow\u003c\/td\u003e\n\u003ctd\u003e12.4 GPM (47 L\/min)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic reservoir\u003c\/td\u003e\n\u003ctd\u003e35 gal. (132.5 L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions\u003c\/td\u003e\n\u003ctd\u003e152 x 135 x 91.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e19,181 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eFoot pedal, squaring arm, left and right back guards with support pads, light curtain emitters and reflectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePower cord (supplied by the customer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325413397\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/6f039cde511851ef\/original\/SH_120500_HD_1of2_10_2019_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-120500-HD Hydraulic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh hydraulic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power does the SH-120500-HD need?\u003c\/summary\u003e\u003cp\u003e220V 3-phase 60 Hz. The 20 HP main motor draws 54 A and the back gauge motor 2 A. The manual calls for a time-delay fuse or breaker, and the customer supplies the power cord.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow does the back gauge work?\u003c\/summary\u003e\u003cp\u003eIt is motorized and run by a YSD6000s numerical control, with a range of 0.4 to 39.3 in. It can run single-step or multi-step programs of up to 25 steps.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow thick a sheet can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 1\/2 in. mild steel or 3\/8 in. stainless steel across the full 122 in. length.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow is it shipped?\u003c\/summary\u003e\u003cp\u003eShipping weight is 19,181 lb, and the shipping dimensions are 152 x 135 x 91.5 in.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat warranty does it carry?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); hydraulic components carry their manufacturer's warranty; included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861531230510,"sku":"BA9-1007085","price":92399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH1205HD_IMG_MAIN.jpg?v=1793161809"},{"product_id":"baileigh-sf-5216-52-inch-manual-foot-shear-16-gauge-mild-steel-capacity","title":"Baileigh SF-5216 52-Inch Manual Foot Shear, 16-Gauge Mild Steel Capacity","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e52\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eFoot Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e16 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStainless\u003c\/span\u003e\u003cb\u003e20 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SF-5216 52-Inch Manual Foot Shear, 16-Gauge Mild Steel Capacity\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SF-5216 is a foot-operated sheet metal shear with a 52 in. maximum shear length. It needs no electrical power: the pedal lowers the hold-downs first and then the top blade, so both hands stay on the material.\u003c\/p\u003e\n\u003cp\u003eIt cuts up to 16 ga. mild steel or 20 ga. stainless steel and down to 24 ga. material, with 24 in. front and back gates. The blades are high carbon, high chrome alloy tool steel, and the shipping weight is 996 lb.\u003c\/p\u003e\n\u003ch4\u003eMulti-Edge Blades\u003c\/h4\u003e\n\u003cp\u003eThe top blade has two cutting edges and the bottom blade has four, so a dull edge can be turned to a fresh one before resharpening.\u003c\/p\u003e\n\u003ch4\u003eBuilt-In Oilers\u003c\/h4\u003e\n\u003cp\u003eOil fill caps at each end feed the slideways through a wick, which keeps routine lubrication simple.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SF5216_IMG_DET1.jpg?v=1793161836\u0026amp;width=1200\" alt=\"Baileigh SF-5216 foot shear detail view 1\" loading=\"lazy\" width=\"1200\" height=\"1200\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e52 in. shear length\u003c\/b\u003e\u003cspan\u003emaximum cut width\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e16 ga. mild steel\u003c\/b\u003e\u003cspan\u003ebased on 65,000 PSI tensile\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e20 ga. stainless steel\u003c\/b\u003e\u003cspan\u003ebased on 100,000 PSI tensile\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e24 ga. minimum thickness\u003c\/b\u003e\u003cspan\u003eper the manual\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e24 in. front and back gates\u003c\/b\u003e\u003cspan\u003ematerial support and gauging\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBack gauge with micro-adjusters\u003c\/b\u003e\u003cspan\u003efor repeat cut lengths\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSquaring guide\u003c\/b\u003e\u003cspan\u003egraduated in inches and millimeters\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHold-downs and spring return\u003c\/b\u003e\u003cspan\u003eclamp before the cut, blade lifts after\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eFoot Shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSF-5216 \/ BA9-1007017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eManual (foot operated, no electrical power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Shear Length\u003c\/td\u003e\n\u003ctd\u003e52 in. (1321 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMild Steel Capacity\u003c\/td\u003e\n\u003ctd\u003e16 ga. (65,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless Steel Capacity\u003c\/td\u003e\n\u003ctd\u003e20 ga. (100,000 PSI tensile)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Gate Length\u003c\/td\u003e\n\u003ctd\u003e24 in. (609 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack Gate Length\u003c\/td\u003e\n\u003ctd\u003e24 in. (609 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Angle\u003c\/td\u003e\n\u003ctd\u003e1°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlades\u003c\/td\u003e\n\u003ctd\u003eHigh carbon, high chrome alloy tool steel; top blade 2 cutting edges, bottom blade 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Gap\u003c\/td\u003e\n\u003ctd\u003e0.005 in. (factory set)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e67 x 32 x 53 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e996 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325412819\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/7baf97534a9eba3a\/original\/SF_5216_05_2021_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SF-5216 Foot Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh foot shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the SF-5216 need power?\u003c\/summary\u003e\u003cp\u003eNo. It is foot operated; the pedal lowers the hold-downs and then the top blade.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 16 ga. mild steel (rated at 65,000 PSI tensile) or 20 ga. stainless steel (rated at 100,000 PSI tensile), and material as thin as 24 ga., across a 52 in. length.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan the blades be reused when they dull?\u003c\/summary\u003e\u003cp\u003eThe top blade has two cutting edges and the bottom blade has four, and the blades can be resharpened.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow is it lubricated?\u003c\/summary\u003e\u003cp\u003eOil fill caps at each end feed the slideways through a wick; the manual recommends Mobil Vactra #2 way oil or an equivalent, and the grease fittings should be kept lubricated.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861533098286,"sku":"BA9-1007017","price":5299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SF5216_IMG_MAIN.jpg?v=1793161835"},{"product_id":"baileigh-mps-5-manual-throatless-shear-3-16-inch-mild-steel-capacity-5-1-4-inch-blade","title":"Baileigh MPS-5 Manual Throatless Shear, 3\/16-Inch Mild Steel Capacity, 5-1\/4-Inch Blade","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e3\/16\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003eManual Throatless Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eBlade Length\u003c\/span\u003e\u003cb\u003e5.25 in.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003ePower\u003c\/span\u003e\u003cb\u003eManual\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh MPS-5 Manual Throatless Shear, 3\/16-Inch Mild Steel Capacity, 5-1\/4-Inch Blade\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh MPS-5 is a hand-operated throatless shear that cuts mild steel up to 3\/16 in. thick with a 5.25 in. blade. It needs no electrical power.\u003c\/p\u003e\n\u003cp\u003eBecause there is no throat, the sheet can be turned as it is cut, so the shear handles straight lines and curves. It is bolted to a bench, table or floor before use, and it ships at 75 lb.\u003c\/p\u003e\n\u003ch4\u003eThroatless Design\u003c\/h4\u003e\n\u003cp\u003eMaterial passes the blade without binding, which lets you cut large panels and follow a radius by hand.\u003c\/p\u003e\n\u003ch4\u003eCast Iron Body\u003c\/h4\u003e\n\u003cp\u003eBaileigh builds the frame from cast iron, and the long handle with a rubber grip provides the leverage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/1010423__mps_5_web_jpg.jpg?v=1793161910\u0026amp;width=1200\" alt=\"Baileigh MPS-5 throatless shear main view\" loading=\"lazy\" width=\"1200\" height=\"1164\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e3\/16 in. mild steel\u003c\/b\u003e\u003cspan\u003erated on 64,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e5.25 in. blade length\u003c\/b\u003e\u003cspan\u003eupper and lower blades\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThroatless\u003c\/b\u003e\u003cspan\u003eno throat depth limit on the sheet\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStraight and radius cuts\u003c\/b\u003e\u003cspan\u003eturn the work as you cut\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCast iron construction\u003c\/b\u003e\u003cspan\u003eper Baileigh\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNo power required\u003c\/b\u003e\u003cspan\u003efully manual operation\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHandle with rubber grip\u003c\/b\u003e\u003cspan\u003e724 mm (about 28-1\/2 in.) handle\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBench, table or floor mount\u003c\/b\u003e\u003cspan\u003ebolt down before use\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eThroatless Shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eMPS-5 \/ BA9-1010423\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eManual (no electrical power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShear capacity\u003c\/td\u003e\n\u003ctd\u003e0.1875 in. (3\/16 in., 4.76 mm) mild steel, based on 64,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade length\u003c\/td\u003e\n\u003ctd\u003e5.25 in. (133.3 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003eThroatless, straight and radius cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eCast iron (per Baileigh)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eBolts to a table, bench or floor; mounting hardware supplied by the customer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions\u003c\/td\u003e\n\u003ctd\u003e24 x 24 x 24 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e75 lb (34 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eShear with upper and lower blades, handle with rubber grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003eMounting bolts, washers and nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e019907011323\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/2428c1bfbda59ea1\/original\/MPS-5-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh MPS-5 Throatless Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh throatless shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the MPS-5 need power?\u003c\/summary\u003e\u003cp\u003eNo. It is a manual shear operated by its handle, with no electrical connection.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow thick can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 3\/16 in. (0.1875 in.) mild steel, rated on 64,000 PSI tensile material.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it cut curves?\u003c\/summary\u003e\u003cp\u003eYes. The throatless design lets the sheet turn as it is cut, so it handles both straight and radius cuts.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow is it mounted?\u003c\/summary\u003e\u003cp\u003eThe manual calls for bolting it to a level, solid table, bench or floor. The customer supplies the bolts, washers and nuts.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat warranty does it carry?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861536047406,"sku":"BA9-1010423","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/1010423__mps_5_web_jpg.jpg?v=1793161910"},{"product_id":"baileigh-sh-5216a-52-inch-pneumatic-sheet-metal-shear-16-gauge-mild-steel-air-powered","title":"Baileigh SH-5216A 52-Inch Pneumatic Sheet Metal Shear, 16-Gauge Mild Steel, Air Powered","description":"\u003clink rel=\"stylesheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/ffx-desc-v1.css?v=1792303111\"\u003e\n\u003cdiv class=\"ffx\"\u003e\n\u003cdiv class=\"ffx-hero\"\u003e\n\u003cdiv class=\"ffx-card\"\u003e\n\u003cdiv class=\"ffx-big\"\u003e52\u003ci\u003ein.\u003c\/i\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ffx-cap\"\u003ePneumatic Shear\u003c\/div\u003e\n\u003cdiv class=\"ffx-two\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMild Steel\u003c\/span\u003e\u003cb\u003e16 ga.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStrokes\/Min\u003c\/span\u003e\u003cb\u003e20\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eBaileigh SH-5216A 52-Inch Pneumatic Sheet Metal Shear, 16-Gauge Mild Steel, Air Powered\u003c\/h2\u003e\n\u003cp\u003eThe Baileigh SH-5216A is an air-powered sheet metal shear with a 52 in. shear length. It is rated for 16 gauge mild steel and 20 gauge stainless steel, and it cycles at 20 strokes per minute.\u003c\/p\u003e\n\u003cp\u003eA pneumatic foot pedal in a pedestal fires the cut, spring-loaded hold-downs clamp the sheet, and a manual back gauge with a dial indicator sets repeat lengths. Front and back gauge lengths are 24 in. each, and the shear ships at 1,588 lb.\u003c\/p\u003e\n\u003ch4\u003eAir Operation\u003c\/h4\u003e\n\u003cp\u003eThe shear runs on shop compressed air through its air control unit. Baileigh lists 90 to 115 PSI, and the manual warns never to connect a supply above 120 PSI.\u003c\/p\u003e\n\u003ch4\u003eMulti-Edge Blades\u003c\/h4\u003e\n\u003cp\u003eThe top blade has two usable edges and the bottom blade has four, both in high carbon, high chrome tool steel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cdiv class=\"ffx-feat\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH5216A_IMG_DET7.jpg?v=1793162011\u0026amp;width=1200\" alt=\"Baileigh SH-5216A pneumatic shear side view with support arms\" loading=\"lazy\" width=\"1200\" height=\"1200\"\u003e\n\u003cul class=\"ffx-bul\"\u003e\n\u003cli\u003e\n\u003cb\u003e52 in. shear length\u003c\/b\u003e\u003cspan\u003e1,321 mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e16 ga. mild steel\u003c\/b\u003e\u003cspan\u003erated on 64,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e20 ga. stainless steel\u003c\/b\u003e\u003cspan\u003erated on 100,000 PSI tensile material\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e20 strokes per minute\u003c\/b\u003e\u003cspan\u003epneumatic drive\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFoot pedal pedestal\u003c\/b\u003e\u003cspan\u003eair foot switch for hands-free cutting\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManual back gauge\u003c\/b\u003e\u003cspan\u003ehand wheel with scale and dial indicator\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront gauge and side gauge\u003c\/b\u003e\u003cspan\u003ewith two material support arms\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpring-loaded hold-downs\u003c\/b\u003e\u003cspan\u003ewith pads, under a hold-down cover\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003ePneumatic Shear specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Stock Number\u003c\/td\u003e\n\u003ctd\u003eSH-5216A \/ BA9-1007163\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003ePneumatic (compressed air)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir supply\u003c\/td\u003e\n\u003ctd\u003e90 to 115 PSI (per Baileigh); never above 120 PSI (manual); 3\/8 in. I.D. minimum hose, 10 ft. maximum length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum shear length\u003c\/td\u003e\n\u003ctd\u003e52 in. (1,321 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMild steel capacity\u003c\/td\u003e\n\u003ctd\u003e16 ga. (1.52 mm), based on 64,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless steel capacity\u003c\/td\u003e\n\u003ctd\u003e20 ga. (0.912 mm), based on 100,000 PSI tensile strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum material thickness\u003c\/td\u003e\n\u003ctd\u003e24 ga. (0.607 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes per minute\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront gauge length\u003c\/td\u003e\n\u003ctd\u003e24 in. (610 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack gauge length\u003c\/td\u003e\n\u003ctd\u003e24 in. (610 mm), manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade angle\u003c\/td\u003e\n\u003ctd\u003e1°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlades\u003c\/td\u003e\n\u003ctd\u003eHigh carbon, high chrome tool steel; top blade 2 edges, bottom blade 4 edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e75 x 36 x 53 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e1,588 lb (720 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eTwo material support arms, front gauge, side gauge, manual back gauge, foot switch pedestal with air foot pedal, air control unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003eAir hose and quick-connect coupler, shut-off valve, floor anchor bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (Baileigh); included die sets, tooling and blades 45 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e731325414103\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/6efbf015f999bb9e\/original\/SH_5216A_10_2015_pdf.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBaileigh SH-5216A Pneumatic Shear Owner's Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec ffx-vid\"\u003e\n\u003ch3\u003eSee it in action\u003c\/h3\u003e\n\u003cdiv class=\"ffx-vids\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/wvE6pbqCzqk\" title=\"Baileigh Industrial 52-Inch Pneumatic Sheet Metal Shear, 16-Gauge Capacity (SH-5216A)\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen loading=\"lazy\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003eBaileigh video: Baileigh Industrial 52-Inch Pneumatic Sheet Metal Shear, 16-Gauge Capacity (SH-5216A).\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ffx-sec\"\u003e\n\u003ch3\u003eBaileigh pneumatic shear questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat air supply does the SH-5216A need?\u003c\/summary\u003e\u003cp\u003eBaileigh lists 90 to 115 PSI. The manual calls for a hose of at least 3\/8 in. I.D. no longer than 10 ft., and says never to connect a supply above 120 PSI.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow thick can it cut?\u003c\/summary\u003e\u003cp\u003eUp to 16 gauge mild steel or 20 gauge stainless steel across 52 in., and down to 24 gauge.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow is the cut length set?\u003c\/summary\u003e\u003cp\u003eA manual back gauge with a hand wheel, scale and dial indicator sets the length behind the blade, and a front gauge and side gauge are used at the front.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow heavy is it to ship?\u003c\/summary\u003e\u003cp\u003eShipping weight is 1,588 lb, with shipping dimensions of 75 x 36 x 53 in.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat warranty does it carry?\u003c\/summary\u003e\u003cp\u003e1 year (Baileigh); included die sets, tooling and blades 45 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":67861541912878,"sku":"BA9-1007163","price":7199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/SH5216A_IMG_MAIN.jpg?v=1793162010"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/collections\/SH5210_IMG_MAIN.jpg?v=1793388410","url":"https:\/\/www.fullforceequipment.com\/collections\/shears-notchers.oembed","provider":"FullForce Equipment","version":"1.0","type":"link"}