{"product_id":"beton-trowel-btsp10h-concrete-scarifier-honda-gx160","title":"Beton Trowel BTSP10H Concrete Scarifier — 7.9 In. Cutting Width, Honda GX160","description":"\u003cp\u003eA grinder polishes. A \u003cstrong\u003escarifier\u003c\/strong\u003e cuts. When you need to take off a coating, remove a trip hazard, level a high spot at a door threshold, or open up a slick slab so a new coating will actually bond to it, a scarifier's \u003cstrong\u003etungsten carbide cutters\u003c\/strong\u003e hammer into the surface and break it away — fast, and with a deliberately rough profile that adhesives grip.\u003c\/p\u003e\u003cp\u003eThe BTSP10H cuts a \u003cstrong\u003e200 mm (7.9 in.) path\u003c\/strong\u003e at up to \u003cstrong\u003e1.6 mm (0.063 in.) per pass\u003c\/strong\u003e, on a \u003cstrong\u003eHonda GX160\u003c\/strong\u003e. Cutter height is set by a \u003cstrong\u003efingertip control\u003c\/strong\u003e, so the operator can feather the depth into an existing surface instead of gouging a step at the start of the cut.\u003c\/p\u003e\u003cp\u003eThe detail that matters on a machine like this is \u003cstrong\u003ewhere the vacuum outlet sits\u003c\/strong\u003e. Beton Trowel put it \u003cstrong\u003elow, right down at the cutters\u003c\/strong\u003e — which is where the dust actually is. Extraction pulled from the top of a housing collects a fraction of what a low port does, and concrete dust is a silica exposure question, not just a housekeeping one. \u003cstrong\u003eTungsten carbide cutters are fitted as standard\u003c\/strong\u003e, not an upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTungsten carbide cutters fitted as standard\u003c\/strong\u003e — not an extra-cost upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVacuum outlet mounted low at the cutters\u003c\/strong\u003e — where the dust is, not where it is convenient\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 mm (7.9 in.) cutting width\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 1.6 mm (0.063 in.) depth per pass\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFingertip cutter height control\u003c\/strong\u003e — feather into the surface rather than gouge it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHonda GX160, 5.5 HP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e134 lbs\u003c\/strong\u003e — one operator, one van\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectric sibling available\u003c\/strong\u003e — the BTSP10E, for indoor work where an engine cannot run\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecifications\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBTSP10H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBeton Trowel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConcrete scarifier \/ surface planer, push\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEngine\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHonda GX160, 5.5 HP, air-cooled gasoline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCutting Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.9 in. (200 mm) — see the note below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCutting Depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 0.063 in. (1.6 mm) per pass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCutters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTungsten carbide, fitted as standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth Control\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFingertip cutter height adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDust Extraction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVacuum outlet positioned low, at the cutters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePush — not self-propelled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e134 lbs (61 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMachine Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e37.4 x 16.5 x 37.8 in. (950 x 420 x 960 mm), L x W x H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eElectric Version\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBTSP10E — 1.5 kW, 230 V, 69 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease read this before you order.\u003c\/strong\u003e This machine is listed by our own distributor, and by others, as a \u003cstrong\u003e\"10 in.\" scarifier\u003c\/strong\u003e. It is not. Beton Trowel publishes a cutting width of \u003cstrong\u003e200 mm, which is 7.9 in.\u003c\/strong\u003e, and their spec sheet, their product page and two independent dealers all agree. The \"10\" appears to have been read off the model name. We would rather lose the sale than have you order a 10 in. machine and unpack a 7.9 in. one — if your job needs a genuine 10 in. path, tell us and we will find you the right machine.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eTwo smaller notes: Beton Trowel's own product page prints \"Honda GX160, 5.5kW\" — a GX160 is 5.5 \u003cstrong\u003eHP\u003c\/strong\u003e, about 4.1 kW, and their spec sheet confirms HP. \u003cstrong\u003eCutter count, vacuum port diameter, fuel tank capacity and crated shipping weight are not published\u003c\/strong\u003e by Beton Trowel, and we will not invent them. Ask and we will put the questions to the factory.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBTSP10H concrete scarifier\u003c\/li\u003e\n\u003cli\u003eHonda GX160 engine, factory installed\u003c\/li\u003e\n\u003cli\u003eTungsten carbide cutter drum, fitted\u003c\/li\u003e\n\u003cli\u003eOperating and safety manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eA dust extractor is not included. The vacuum outlet is there to be connected to one, and on interior or occupied-building work you will want one — ask and we will quote a suitable unit alongside the machine.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eAdd To Your Machine\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/beton-trowel-btcs501-concrete-saw-18-in-honda-gx390\"\u003eBeton Trowel BTCS501 concrete saw\u003c\/a\u003e — for cutting out the section rather than planing the surface\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bravepro-brpfs108e-floor-stripper-heavy-duty-10-in-electric\"\u003eBravePro BRPFS108E floor stripper\u003c\/a\u003e — for lifting tile, VCT and glued-down coverings before the scarifier goes to work\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/surface-prep\"\u003eAll surface prep equipment\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eOrdering more than one machine? Put them on a single freight quote — one truck is materially cheaper than two.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/betontrowel.com\/wp-content\/uploads\/2025\/09\/BTSP10-EN-20220901.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBTSP10H \/ BTSP10E Scarifier Specification Sheet (PDF) — Beton Trowel\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eOperation Video\u003c\/h3\u003e\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/FNeR05u_tyQ\" title=\"Beton Trowel Surface preparation scarifier BTSP10H\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBeton Trowel's own footage of this exact model. They also publish operation and drum-replacement videos for the smaller BTSP8H — useful if you want to see how the cutter drum comes apart, but that is the 8 in. machine, not this one.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cp\u003eThis machine ships by freight, on a pallet. Beton Trowel does not publish a crated weight for it, so rather than guess at a parcel rate we quote it to your exact address and confirm with you before anything is charged. Tell us on the quote form whether the delivery site has a forklift or a loading dock, because that changes the rate more than the distance does.\u003c\/p\u003e","brand":"Beton Trowel","offers":[{"title":"Default Title","offer_id":52629052227886,"sku":"BTSP10H","price":2503.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/0319060_bt-surface-prep-scarifier-10-in.-gx160.jpg?v=1789122549","url":"https:\/\/www.fullforceequipment.com\/products\/beton-trowel-btsp10h-concrete-scarifier-honda-gx160","provider":"FullForce Equipment","version":"1.0","type":"link"}