{"product_id":"omga-radial-series-radial-arm-saw","title":"OMGA RADIAL Series Heavy-Duty Radial Arm Saw — 900\/7 \u0026 1250\/7","description":"\u003cp\u003eThe OMGA RADIAL series are the heavy end of OMGA's radial arm saw line — 7 HP machines on a \u003cstrong\u003ecast iron arm\u003c\/strong\u003e, built for furniture manufacturers, frame makers, sawmills and carpentry shops that need one machine to do many jobs well rather than one job quickly.\u003c\/p\u003e\n\n\u003cp\u003eWhat makes them versatile is that the head swivels \u003cem\u003eand\u003c\/em\u003e tilts on both the horizontal and vertical axes. That means compound angles, edge work and rip cuts all come off the same machine without a second setup. Both models carry positive stops for bevel from 0 to 45° and mitre at 45-0-45, take a 1 1\/2\" dado, and turn at 3,200 RPM on a 1\" arbor bore.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eRADIAL 900\/7\u003c\/strong\u003e runs an 18\" blade with 35 1\/2\" of cross cut and 43 5\/16\" of rip. The \u003cstrong\u003eRADIAL 1250\/7\u003c\/strong\u003e steps up to a 20\" blade with 49 7\/32\" cross cut and 59\" rip — wide enough to break down full sheets and long stock in one pass. OMGA machines are built in Italy by DIERREGI S.r.l. and supported from OMGA Industries in South Bend, Indiana.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power required.\u003c\/strong\u003e Both models are available in 230V or 460V three phase only — there is no single-phase version and no 208V option on this series. Select your model and voltage above before ordering; the machine is built to the voltage you choose and it cannot be changed afterward. If your shop is on single-phase service you will need a phase converter to run one of these saws.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Iron Arm\u003c\/strong\u003e – the arm is the machine on a radial saw, and cast iron is why these hold a line that a fabricated arm will not\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwivel and Tilt on Both Axes\u003c\/strong\u003e – horizontal and vertical, so compound angles and edge work come off one setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 HP Motor\u003c\/strong\u003e – sized for full-depth cuts in hardwood, all day\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositive Stops\u003c\/strong\u003e – bevel 0–45°, mitre 45-0-45 on both models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 1\/2\" Dado Capacity\u003c\/strong\u003e – grooving and housing work without a second machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Reaches\u003c\/strong\u003e – 35 1\/2\" cross cut on the 900\/7, or 49 7\/32\" on the 1250\/7 for sheet-width work\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Head Feed Available\u003c\/strong\u003e – a factory option on both models for repetitive production cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced in North America from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eRADIAL 900\/7\u003c\/th\u003e\n\u003cth\u003eRADIAL 1250\/7\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e18\" (450 mm)\u003c\/td\u003e\n\u003ctd\u003e20\" (500 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e7 HP\u003c\/td\u003e\n\u003ctd\u003e7 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity\u003c\/td\u003e\n\u003ctd\u003e35 1\/2\" (902 mm)\u003c\/td\u003e\n\u003ctd\u003e49 7\/32\" (1,250 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRipping capacity\u003c\/td\u003e\n\u003ctd\u003e43 5\/16\" (1,100 mm)\u003c\/td\u003e\n\u003ctd\u003e59\" (1,499 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArm\u003c\/td\u003e\n\u003ctd\u003eCast iron\u003c\/td\u003e\n\u003ctd\u003eCast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBevel positive stops\u003c\/td\u003e\n\u003ctd\u003e0–45°\u003c\/td\u003e\n\u003ctd\u003e0–45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMitre positive stops\u003c\/td\u003e\n\u003ctd\u003e45-0-45\u003c\/td\u003e\n\u003ctd\u003e45-0-45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. dado capacity\u003c\/td\u003e\n\u003ctd\u003e1 1\/2\" (38 mm)\u003c\/td\u003e\n\u003ctd\u003e1 1\/2\" (38 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut at 90°\u003c\/td\u003e\n\u003ctd\u003e5 7\/8\" (149 mm)\u003c\/td\u003e\n\u003ctd\u003eConfirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut at 45°\u003c\/td\u003e\n\u003ctd\u003e4 3\/16\" (106 mm)\u003c\/td\u003e\n\u003ctd\u003eConfirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable size\u003c\/td\u003e\n\u003ctd\u003e47\" × 39\" (1,194 × 991 mm)\u003c\/td\u003e\n\u003ctd\u003eConfirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall dimensions\u003c\/td\u003e\n\u003ctd\u003e59\" × 48\" (150 × 122 cm)\u003c\/td\u003e\n\u003ctd\u003eConfirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e800 lbs (363 kg)\u003c\/td\u003e\n\u003ctd\u003eConfirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e63\" × 19\" × 43\"\u003c\/td\u003e\n\u003ctd\u003eConfirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eThree phase only — 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eA note on the 1250\/7 figures marked \"confirmed at order\": the manufacturer's published data sheet for the 1250\/7 currently repeats the 900\/7's dimensions, which cannot be right for a larger machine. Rather than print numbers we cannot stand behind, we confirm those dimensions with OMGA in writing before your order is placed. Blade size, motor, cross cut and rip capacity above are the manufacturer's own stated figures for the 1250\/7.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA RADIAL radial arm saw in the model and voltage selected above\u003c\/li\u003e\n\u003cli\u003eMachine only. A saw blade is not listed as included — contact us before you order if you need one supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/86KLolDBDSM\" title=\"OMGA RADIAL 900\/7 radial arm saw\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVideo shows the RADIAL 900\/7.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eThis machine ships by freight from OMGA in South Bend, Indiana. At 800 lbs and up these are strapped to a pallet and move on a full LTL lane. Freight is quoted separately once we have your complete delivery address — we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"RADIAL 900\/7 — 18\", 7 HP \/ 230V Three Phase","offer_id":52560494493998,"sku":"900209-230","price":16555.0,"currency_code":"USD","in_stock":true},{"title":"RADIAL 900\/7 — 18\", 7 HP \/ 460V Three Phase","offer_id":52560494526766,"sku":"900209-460","price":16555.0,"currency_code":"USD","in_stock":true},{"title":"RADIAL 1250\/7 — 20\", 7 HP \/ 230V Three Phase","offer_id":52560494559534,"sku":"900245-230","price":18526.0,"currency_code":"USD","in_stock":true},{"title":"RADIAL 1250\/7 — 20\", 7 HP \/ 460V Three Phase","offer_id":52560494592302,"sku":"900245-460","price":18526.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/radial-900-7_22d49595-7fed-4086-8403-5c3d2e377df0.jpg?v=1788393158","url":"https:\/\/www.fullforceequipment.com\/products\/omga-radial-series-radial-arm-saw","provider":"FullForce Equipment","version":"1.0","type":"link"}