{"product_id":"omga-rn-series-radial-arm-saw","title":"OMGA RN Series Radial Arm Saw — RN 450, RN 700 \u0026 RN 900","description":"\u003cp\u003eThe OMGA RN series are precision radial arm saws for furniture makers, frame shops, sawmills and carpentry shops — the kind of machine that lives at the end of a bench and cuts everything that comes through the door. Three sizes share the same build: the RN 450 with a 12\" blade and 4 HP, and the larger RN 700 and RN 900 with 14\" blades and 5 HP.\u003c\/p\u003e\n\n\u003cp\u003eWhat separates these from a job-site radial arm saw is the carriage. It rides on \u003cstrong\u003eeight bearings\u003c\/strong\u003e running on interchangeable steel tracks, and each bearing carries a dust scraper so the track stays clean as the saw is pulled through cut after cut. Tracks that stay clean are tracks that stay accurate, and when they eventually wear, they are replaceable rather than terminal. The main angle positions lock by self-centering, so the common angles are repeatable without measuring.\u003c\/p\u003e\n\n\u003cp\u003eChoose the size by the cut you need. The RN 450 crosscuts 17 3\/4\" and rips 26 3\/4\". The RN 700 goes to 27 1\/2\" crosscut and 36 5\/8\" rip. The RN 900 reaches 35 5\/16\" crosscut and 44 1\/2\" rip — wide enough for sheet-width work. All three turn at 3,200 RPM with a 1\" arbor bore, bevel stops from 0 to 45° and mitre stops at 45-0-45. OMGA machines are built in Italy by DIERREGI S.r.l. and supported from OMGA Industries in South Bend, Indiana.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power required.\u003c\/strong\u003e These machines are available in 208V, 230V or 460V three phase only — there is no single-phase version. Select your model and voltage above before ordering; the machine is built to the voltage you choose and it cannot be changed afterward. If your shop is on single-phase service you will need a phase converter to run one of these saws.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-Bearing Carriage\u003c\/strong\u003e – the saw carriage rides on eight bearings rather than a sliding way, which is where the cut quality comes from\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust Scrapers on the Bearings\u003c\/strong\u003e – the steel tracks and bearings stay clean through the shift instead of packing with sawdust\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable Steel Tracks\u003c\/strong\u003e – tracks are a replaceable wear item, so the machine is rebuildable rather than disposable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Centering Angle Locking\u003c\/strong\u003e – the main angles are found and held repeatably\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBevel 0–45°, Mitre 45-0-45\u003c\/strong\u003e – positive stops on every model in the series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Capacities\u003c\/strong\u003e – 17 3\/4\", 27 1\/2\" or 35 5\/16\" crosscut, so you buy the reach you actually need\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDado Capable\u003c\/strong\u003e – 1 1\/2\" maximum dado on the RN 700 and RN 900\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced in North America from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eRN 450\u003c\/th\u003e\n\u003cth\u003eRN 700\u003c\/th\u003e\n\u003cth\u003eRN 900\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e12\" (305 mm)\u003c\/td\u003e\n\u003ctd\u003e14\" (350 mm)\u003c\/td\u003e\n\u003ctd\u003e14\" (350 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e4 HP\u003c\/td\u003e\n\u003ctd\u003e5 HP\u003c\/td\u003e\n\u003ctd\u003e5 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity\u003c\/td\u003e\n\u003ctd\u003e17 3\/4\" (451 mm)\u003c\/td\u003e\n\u003ctd\u003e27 1\/2\" (699 mm)\u003c\/td\u003e\n\u003ctd\u003e35 5\/16\" (897 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRipping capacity\u003c\/td\u003e\n\u003ctd\u003e26 3\/4\" (679 mm)\u003c\/td\u003e\n\u003ctd\u003e36 5\/8\" (930 mm)\u003c\/td\u003e\n\u003ctd\u003e44 1\/2\" (1,130 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut at 90°\u003c\/td\u003e\n\u003ctd\u003e3 1\/2\" (89 mm)\u003c\/td\u003e\n\u003ctd\u003e4 1\/2\" (114 mm)\u003c\/td\u003e\n\u003ctd\u003e4 1\/2\" (114 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut at 45°\u003c\/td\u003e\n\u003ctd\u003e2 1\/2\" (64 mm)\u003c\/td\u003e\n\u003ctd\u003e3 3\/16\" (81 mm)\u003c\/td\u003e\n\u003ctd\u003e3 3\/16\" (81 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. dado capacity\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003ctd\u003e1 1\/2\" (38 mm)\u003c\/td\u003e\n\u003ctd\u003e1 1\/2\" (38 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBevel positive stops\u003c\/td\u003e\n\u003ctd\u003e0–45°\u003c\/td\u003e\n\u003ctd\u003e0–45°\u003c\/td\u003e\n\u003ctd\u003e0–45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMitre positive stops\u003c\/td\u003e\n\u003ctd\u003e45-0-45\u003c\/td\u003e\n\u003ctd\u003e45-0-45\u003c\/td\u003e\n\u003ctd\u003e45-0-45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable size\u003c\/td\u003e\n\u003ctd\u003e27\" × 21\" (686 × 533 mm)\u003c\/td\u003e\n\u003ctd\u003e35\" × 35\" (889 × 889 mm)\u003c\/td\u003e\n\u003ctd\u003e32\" × 46\" (813 × 1,168 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall dimensions\u003c\/td\u003e\n\u003ctd\u003e27\" × 40\" (69 × 102 cm)\u003c\/td\u003e\n\u003ctd\u003e35\" × 50\" (89 × 127 cm)\u003c\/td\u003e\n\u003ctd\u003e54\" × 46\" (137 × 117 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e246 lbs (112 kg)\u003c\/td\u003e\n\u003ctd\u003e368 lbs (167 kg)\u003c\/td\u003e\n\u003ctd\u003e412 lbs (187 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e35\" × 35\" × 43\"\u003c\/td\u003e\n\u003ctd\u003e52\" × 38\" × 63\"\u003c\/td\u003e\n\u003ctd\u003e63\" × 20\" × 43\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003eThree phase only — 208V, 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA radial arm saw in the model and voltage selected above\u003c\/li\u003e\n\u003cli\u003eMachine only. A saw blade is not listed as included — contact us before you order if you need one supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/86KLolDBDSM\" title=\"OMGA RADIAL 900\/7 radial arm saw\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOMGA have not filmed the RN series on its own. The video shows the \u003ca href=\"\/products\/omga-radial-series-radial-arm-saw\"\u003eRADIAL 900\/7\u003c\/a\u003e, the heavier machine in the same family — the eight-bearing carriage, the pull-through cutting action and the angle locking are the same in principle on the RN saws.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eThis machine ships by freight from OMGA in South Bend, Indiana. Freight is quoted separately once we have your complete delivery address — we confirm the exact cost with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"RN 450 — 12\", 4 HP \/ 208V Three Phase","offer_id":52560476209454,"sku":"900290-208","price":7789.0,"currency_code":"USD","in_stock":true},{"title":"RN 450 — 12\", 4 HP \/ 230V Three Phase","offer_id":52560476242222,"sku":"900290-230","price":7789.0,"currency_code":"USD","in_stock":true},{"title":"RN 450 — 12\", 4 HP \/ 460V Three Phase","offer_id":52560476274990,"sku":"900290-460","price":7789.0,"currency_code":"USD","in_stock":true},{"title":"RN 700 — 14\", 5 HP \/ 208V Three Phase","offer_id":52560476307758,"sku":"900355-208","price":8157.0,"currency_code":"USD","in_stock":true},{"title":"RN 700 — 14\", 5 HP \/ 230V Three Phase","offer_id":52560476340526,"sku":"900355-230","price":8157.0,"currency_code":"USD","in_stock":true},{"title":"RN 700 — 14\", 5 HP \/ 460V Three Phase","offer_id":52560476373294,"sku":"900355-460","price":8157.0,"currency_code":"USD","in_stock":true},{"title":"RN 900 — 14\", 5 HP \/ 208V Three Phase","offer_id":52560476406062,"sku":"900655-208","price":8491.0,"currency_code":"USD","in_stock":true},{"title":"RN 900 — 14\", 5 HP \/ 230V Three Phase","offer_id":52560476438830,"sku":"900655-230","price":8491.0,"currency_code":"USD","in_stock":true},{"title":"RN 900 — 14\", 5 HP \/ 460V Three Phase","offer_id":52560476471598,"sku":"900655-460","price":8491.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/rn-450.jpg?v=1788392265","url":"https:\/\/www.fullforceequipment.com\/products\/omga-rn-series-radial-arm-saw","provider":"FullForce Equipment","version":"1.0","type":"link"}