{"product_id":"omga-stop-nc-positioner","title":"OMGA Stop — NC Programmable Length Positioner, 6' to 22' Traverse","description":"\u003cp\u003eThe OMGA Stop is a numerically controlled length positioner that \u003cstrong\u003eretrofits onto machines you already own\u003c\/strong\u003e. It is not a saw. It is the fence stop that drives itself to the next programmed length, so the operator loads, cuts, and the stop has already moved before they look up.\u003c\/p\u003e\n\n\u003cp\u003eIt works with up-cut saws, radial arm saws, table saws, drills, mitre saws and double mitre saws. If you are running a cut list by hand with a tape and a clamp-on stop, this is the piece that turns that station into a production cell — and it does it without replacing the machine.\u003c\/p\u003e\n\n\u003cp\u003eA brushless motor drives the carriage at up to 200 feet per minute along a precision linear encoder, holding position to \u003cstrong\u003e±0.004\"\u003c\/strong\u003e. The controller stores up to 500 programs and ships with three software packages: Pusher Basic, Advanced Pusher and Picture Frame. Connectivity is unusually generous for shop equipment — two USB, two RS232 and an RJ45 Ethernet port, so cut lists can come off a network or a memory stick rather than being keyed in.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThis is the one OMGA machine that does not need three-phase power.\u003c\/strong\u003e It runs on \u003cstrong\u003e110V or 220V single phase\u003c\/strong\u003e, which means almost any shop can take one regardless of service.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing a Size and Hand\u003c\/h3\u003e\n\u003cp\u003eThe number is the \u003cstrong\u003euseable traverse in feet\u003c\/strong\u003e — the longest piece the stop can position. Choose the hand by which side of your machine the infeed runs: the stop mounts to the left or the right of the cutting head, and they are not interchangeable. If you are unsure, send us a photo of your setup and we will confirm before ordering.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eUseable traverse\u003c\/th\u003e\n\u003cth\u003eTypical use\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOMGA Stop 6\u003c\/td\u003e\n\u003ctd\u003e6'\u003c\/td\u003e\n\u003ctd\u003eShort parts, frame stock, small shop footprint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOMGA Stop 10\u003c\/td\u003e\n\u003ctd\u003e10'\u003c\/td\u003e\n\u003ctd\u003eGeneral cabinet and millwork lengths\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOMGA Stop 13\u003c\/td\u003e\n\u003ctd\u003e13'\u003c\/td\u003e\n\u003ctd\u003eLong millwork and trim runs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOMGA Stop 16\u003c\/td\u003e\n\u003ctd\u003e16'\u003c\/td\u003e\n\u003ctd\u003eFull-length stock without repositioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOMGA Stop 22\u003c\/td\u003e\n\u003ctd\u003e22'\u003c\/td\u003e\n\u003ctd\u003eTimber, architectural and structural lengths\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetrofits Existing Machines\u003c\/strong\u003e – up-cut, radial arm, table, mitre and double mitre saws, and drills. Your saw stays; the stop does the measuring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e±0.004\" Positioning Accuracy\u003c\/strong\u003e – on a precision linear encoder, not a counted belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 FPM Traverse\u003c\/strong\u003e – the stop is in position before the operator is ready for the next cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 Programs Stored\u003c\/strong\u003e – recurring cut lists get recalled, not re-entered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Software Packages Included\u003c\/strong\u003e – Pusher Basic, Advanced Pusher and Picture Frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB and Ethernet\u003c\/strong\u003e – 2 × USB, 2 × RS232, 1 × RJ45, so cut lists load from a network or a stick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Phase\u003c\/strong\u003e – 110V or 220V, unlike every other OMGA machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrushless Motor\u003c\/strong\u003e – 0.66 kW (0.9 HP), no brushes to service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUseable traverse\u003c\/td\u003e\n\u003ctd\u003e6', 10', 13', 16' or 22' depending on model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003eBrushless, 0.66 kW (0.9 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum traversing speed\u003c\/td\u003e\n\u003ctd\u003e200 FPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePositioning accuracy\u003c\/td\u003e\n\u003ctd\u003e± 0.004\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasuring system\u003c\/td\u003e\n\u003ctd\u003ePrecision linear encoder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware included\u003c\/td\u003e\n\u003ctd\u003ePusher Basic, Advanced Pusher, Picture Frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum programs\u003c\/td\u003e\n\u003ctd\u003e500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection ports\u003c\/td\u003e\n\u003ctd\u003e2 × USB, 2 × RS232, 1 × RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemovable media\u003c\/td\u003e\n\u003ctd\u003eUSB port, Ethernet port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003e110V or 220V \u003cstrong\u003esingle phase\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHand\u003c\/td\u003e\n\u003ctd\u003eRight hand or left hand — not interchangeable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA Stop in the traverse length and hand selected above\u003c\/li\u003e\n\u003cli\u003ePrecision linear encoder system\u003c\/li\u003e\n\u003cli\u003ePusher Basic, Advanced Pusher and Picture Frame software\u003c\/li\u003e\n\u003cli\u003eMounting brackets and the table\/legs stand are \u003cstrong\u003eseparate\u003c\/strong\u003e — see below\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat You Also Need\u003c\/h3\u003e\n\u003cp\u003eThe Stop on its own is a carriage and a controller. To put it to work you need three things: a \u003cstrong\u003etable\u003c\/strong\u003e for it to travel on, a \u003cstrong\u003ebracket\u003c\/strong\u003e that ties that table to your machine, and a \u003cstrong\u003elink kit\u003c\/strong\u003e that wires the two together safely.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/omga-stop-table-and-legs\"\u003eTable and Legs\u003c\/a\u003e — 6', 10', 13', 16' or 22'. \u003cstrong\u003eMatch it to your Stop's length.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/omga-stop-basic-bracket\"\u003eBasic Bracket with Shock Absorber\u003c\/a\u003e — the pusher head that touches your workpiece. Right or left hand\u003c\/li\u003e\n\u003cli\u003eThen \u003cstrong\u003eone\u003c\/strong\u003e machine bracket: \u003ca href=\"\/products\/omga-stop-bracket-mitre-saw\"\u003efor mitre chop saws\u003c\/a\u003e · \u003ca href=\"\/products\/omga-stop-bracket-radial-arm-saw\"\u003efor radial arm saws\u003c\/a\u003e · \u003ca href=\"\/products\/omga-stop-bracket-v-235\"\u003e45° bracket for the V 235\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/omga-stop-safety-link-kit\"\u003eSafety \u0026amp; Link Kit\u003c\/a\u003e — mitre, up-cut or generic. 🔑 The V 235 bracket already includes one\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional Extras\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/omga-stop-tail-clamp\"\u003eTail Clamp Attachment\u003c\/a\u003e — vertical or horizontal, holds the far end of long stock\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/omga-stop-bar-code-reader\"\u003eBar Code Reader\u003c\/a\u003e — scan a work order straight into the controller\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/omga-stop-label-printer\"\u003eLabel Printer\u003c\/a\u003e — peel-off part labels at the saw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure which bracket or kit your machine takes? Tell us the machine and we will confirm it with OMGA before anything ships. Ordering everything together also puts it all on one freight quote, which is far cheaper than shipping small parts separately.\u003c\/p\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/OGpT9SRjRAE\" title=\"OMGA Stop NC programmable length positioner\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eThese are long items — a 22' unit is exactly that — and ship by freight from OMGA in South Bend, Indiana. Freight is quoted separately once we have your complete delivery address, and we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"6' — Stop 6 \/ Right Hand","offer_id":52560594960686,"sku":"OMGA-STOP6-RH","price":9348.0,"currency_code":"USD","in_stock":true},{"title":"6' — Stop 6 \/ Left Hand","offer_id":52560594993454,"sku":"OMGA-STOP6-LH","price":9348.0,"currency_code":"USD","in_stock":true},{"title":"10' — Stop 10 \/ Right Hand","offer_id":52560595026222,"sku":"OMGA-STOP10-RH","price":9571.0,"currency_code":"USD","in_stock":true},{"title":"10' — Stop 10 \/ Left Hand","offer_id":52560595058990,"sku":"OMGA-STOP10-LH","price":9571.0,"currency_code":"USD","in_stock":true},{"title":"13' — Stop 13 \/ Right Hand","offer_id":52560595091758,"sku":"OMGA-STOP13-RH","price":10067.0,"currency_code":"USD","in_stock":true},{"title":"13' — Stop 13 \/ Left Hand","offer_id":52560595124526,"sku":"OMGA-STOP13-LH","price":10067.0,"currency_code":"USD","in_stock":true},{"title":"16' — Stop 16 \/ Right Hand","offer_id":52560595157294,"sku":"OMGA-STOP16-RH","price":15848.0,"currency_code":"USD","in_stock":true},{"title":"16' — Stop 16 \/ Left Hand","offer_id":52560595190062,"sku":"OMGA-STOP16-LH","price":15848.0,"currency_code":"USD","in_stock":true},{"title":"22' — Stop 22 \/ Right Hand","offer_id":52560595222830,"sku":"OMGA-STOP22-RH","price":17637.0,"currency_code":"USD","in_stock":true},{"title":"22' — Stop 22 \/ Left Hand","offer_id":52560595255598,"sku":"OMGA-STOP22-LH","price":17637.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/omga-stop-22-rh.jpg?v=1788400012","url":"https:\/\/www.fullforceequipment.com\/products\/omga-stop-nc-positioner","provider":"FullForce Equipment","version":"1.0","type":"link"}