{"product_id":"omga-t-53-370","title":"OMGA T 53 370 — 14\" Compound Mitre Chop Saw, 4 HP","description":"\u003cp\u003eThe OMGA T 53 370 is the compound-cutting version of OMGA's heaviest mitre chop saw. Where the T 50 350 swings left and right, the T 53 370 tilts as well, so a mitre and a bevel happen in one pass instead of two setups. For crown, casing, frame stock and anything else that meets at a corner in two planes, that is the difference between a clean job and a fussy one.\u003c\/p\u003e\n\n\u003cp\u003eUnderneath it is the same machine as the T 50 350 and built to the same standard: solid cast iron base and head, a rotating table riding on roller bearings, and auto-centering positive stops at 45°, 30°, 22½°, 15° and 10° on both sides of centre, with manual locking for anything in between. The motor is belt driven and steps up to 4 HP to carry the extra work of an angled cut.\u003c\/p\u003e\n\n\u003cp\u003eCapacity is 6 3\/4\" across at 90° and 4 1\/8\" at 45°, with a maximum depth of cut of 4 5\/16\" flat and 2\" at 45°. Bevelled cross cut reaches 6 1\/4\". The 14\" blade turns at 3,200 RPM. OMGA machines are built in Italy by DIERREGI S.r.l. and supported from OMGA Industries in South Bend, Indiana.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power required.\u003c\/strong\u003e This machine is available in 208V, 230V or 460V three phase only — there is no single-phase version. Select your voltage above before ordering; the machine is built to the voltage you choose and it cannot be changed afterward. If your shop is on single-phase service you will need a phase converter to run this saw.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompound Cutting\u003c\/strong\u003e – mitre and bevel together in a single pass, up to 6 1\/4\" bevelled cross cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Iron Base and Head\u003c\/strong\u003e – mass where it matters, so the machine absorbs vibration instead of putting it into the cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoller-Bearing Rotating Table\u003c\/strong\u003e – smooth and repeatable through thousands of angle changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-Centering Positive Stops\u003c\/strong\u003e – 45°, 30°, 22½°, 15° and 10° on both sides, found by feel rather than by squinting at a scale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual Lock for Intermediate Angles\u003c\/strong\u003e – anything between the stops is still available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt-Driven 4 HP Motor\u003c\/strong\u003e – a full horsepower over the T 50 350, to carry the angled cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 1\/8\" Dust Chute\u003c\/strong\u003e – connects to shop dust collection out of the box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced in North America from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e14\" (350 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e4 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 90°\u003c\/td\u003e\n\u003ctd\u003e6 3\/4\" (171 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 45°\u003c\/td\u003e\n\u003ctd\u003e4 1\/8\" (105 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum bevelled cross cut\u003c\/td\u003e\n\u003ctd\u003e6 1\/4\" (159 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum depth of cut\u003c\/td\u003e\n\u003ctd\u003e4 5\/16\" (110 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum depth of cut at 45°\u003c\/td\u003e\n\u003ctd\u003e2\" (51 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePositive stops\u003c\/td\u003e\n\u003ctd\u003e45°, 30°, 22½°, 15°, 10° both sides of centre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable size\u003c\/td\u003e\n\u003ctd\u003e23 5\/8\" × 17 1\/8\" (600 × 435 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust chute diameter\u003c\/td\u003e\n\u003ctd\u003e3 1\/8\" (79 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003eThree phase only — 208V, 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e255 lbs (116 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e28\" × 28\" × 33\" (71 × 71 × 84 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA T 53 370 compound mitre chop saw, built to the voltage selected above\u003c\/li\u003e\n\u003cli\u003eMachine only. A saw blade is not listed as included — contact us before you order if you need one supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/Pqhg0nnB_Cg\" title=\"OMGA T 50 350 mitre chop saw\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOMGA have not filmed the T 53 370 on its own. The video shows the \u003ca href=\"\/products\/omga-t-50-350\"\u003eT 50 350\u003c\/a\u003e — the same machine, same cast iron base, same table and stops, without the tilting head. Everything you see here applies to the T 53 370; the T 53 370 adds bevel.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eThis machine ships by freight from OMGA in South Bend, Indiana. Freight is quoted separately once we have your complete delivery address — we confirm the exact cost with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"208V Three Phase","offer_id":52560493478190,"sku":"931115-208","price":9981.0,"currency_code":"USD","in_stock":true},{"title":"230V Three Phase","offer_id":52560493510958,"sku":"931115-230","price":9981.0,"currency_code":"USD","in_stock":true},{"title":"460V Three Phase","offer_id":52560493543726,"sku":"931115-460","price":9981.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/t-53-370.jpg?v=1788393055","url":"https:\/\/www.fullforceequipment.com\/products\/omga-t-53-370","provider":"FullForce Equipment","version":"1.0","type":"link"}