{"product_id":"omga-tr-2b-double-mitre-saw","title":"OMGA TR 2B — 14\" Twin-Head Double Mitre Saw, 2 × 3 HP","description":"\u003cp\u003eThe TR 2B is the 14\" machine in OMGA's twin-head double mitre line — the same idea as the TR 2A with a bigger blade and a full inch more cross cut. Both ends of a piece are cut in one cycle, mitred or square, so stock leaves the machine finished at both ends.\u003c\/p\u003e\n\n\u003cp\u003eThe left head is fixed and the right head traverses, with positive locking at 90° and 45° right and left, and manual locking on intermediate angles. Distance between the saws runs from 13 3\/16\" out to 9'2\". Two 3 HP motors turn 14\" blades at 3,200 RPM, cutting 6 1\/2\" wide at 90° and 4 1\/2\" at 45°.\u003c\/p\u003e\n\n\u003cp\u003eIf your stock is smaller, the \u003ca href=\"\/products\/omga-tr-2a-double-mitre-saw\"\u003eTR 2A\u003c\/a\u003e does the same job on 12\" blades for less money. If you need to mitre and bevel at once, the \u003ca href=\"\/products\/omga-tr-2b-i-double-mitre-saw\"\u003eTR 2B I\u003c\/a\u003e adds tilting heads.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power and compressed air required.\u003c\/strong\u003e Available in 230V or 460V three phase only — there is no single-phase version. Clamping is pneumatic, so the machine needs a compressed air supply. Select your version and voltage above before ordering; the machine is built to the voltage you choose.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Version\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTR 2B\u003c\/strong\u003e – the standard machine, head positioned by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTR 2B VIS\u003c\/strong\u003e – adds a \u003cstrong\u003edigital display\u003c\/strong\u003e of the distance between saw blades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTR 2B NC\u003c\/strong\u003e – adds an \u003cstrong\u003eNC positioner\u003c\/strong\u003e that drives the head to the programmed distance automatically, plus \u003cstrong\u003etwo horizontal pneumatic clamps\u003c\/strong\u003e not fitted to the other versions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Heads, One Cycle\u003c\/strong\u003e – both ends cut to a set length in a single operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 1\/2\" Cross Cut at 90°\u003c\/strong\u003e – a full inch more than the TR 2A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed Left Head, Traversing Right Head\u003c\/strong\u003e – one reference face stays put\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositive Locking at 90° and 45° Both Sides\u003c\/strong\u003e – manual locking on intermediate angles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9'2\" Maximum Between Saws\u003c\/strong\u003e – full-length stock in one pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 HP Motor Upgrade Available\u003c\/strong\u003e – a factory option on this model\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePneumatic Clamping and Centre Support Included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaw Blades Included\u003c\/strong\u003e – ships with blades fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e14\" (350 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e2 × 3 HP (4 HP available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. distance between saws\u003c\/td\u003e\n\u003ctd\u003e9'2\" (2,794 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. distance between saws\u003c\/td\u003e\n\u003ctd\u003e13 3\/16\" (335 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. distance between saws at 45°\u003c\/td\u003e\n\u003ctd\u003e18 1\/8\" (460 mm), or 9 7\/16\" (240 mm) with options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 90°\u003c\/td\u003e\n\u003ctd\u003e6 1\/2\" (165 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 45°\u003c\/td\u003e\n\u003ctd\u003e4 1\/2\" (114 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum depth of cut\u003c\/td\u003e\n\u003ctd\u003e4 1\/4\" (108 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBevel \/ compound cutting\u003c\/td\u003e\n\u003ctd\u003eNot available — see the TR 2B I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust chute\u003c\/td\u003e\n\u003ctd\u003e2 × 3 1\/8\" (2 × 79 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003eThree phase only — 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir supply\u003c\/td\u003e\n\u003ctd\u003eCompressed air required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. shipping weight\u003c\/td\u003e\n\u003ctd\u003e1,573 lbs (713 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e150\" × 39\" × 53\" (381 × 99 × 135 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA TR 2B in the version and voltage selected above\u003c\/li\u003e\n\u003cli\u003eSaw blades, fitted\u003c\/li\u003e\n\u003cli\u003eMagnetic starter with overload protection\u003c\/li\u003e\n\u003cli\u003eAir filter and regulator\u003c\/li\u003e\n\u003cli\u003eVertical pneumatic clamps and centre support\u003c\/li\u003e\n\u003cli\u003eNC version only: two additional horizontal pneumatic clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/mmQHUITNK70\" title=\"OMGA TR Series double mitre saws\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOMGA's TR Series overview — it covers the TR 2A, TR 2B and TR 2B I together, since all three share the same twin-head design.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eAt 1,573 lbs and 150\" crated, this machine ships by freight from OMGA in South Bend, Indiana. It is a full LTL lane and will need a forklift or a loading dock at delivery. Freight is quoted separately once we have your complete delivery address — we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"Standard \/ 230V Three Phase","offer_id":52560567042350,"sku":"901313-230","price":38949.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ 460V Three Phase","offer_id":52560567075118,"sku":"901313-460","price":38949.0,"currency_code":"USD","in_stock":true},{"title":"VIS — Digital Display \/ 230V Three Phase","offer_id":52560567107886,"sku":"901314-230","price":41559.0,"currency_code":"USD","in_stock":true},{"title":"VIS — Digital Display \/ 460V Three Phase","offer_id":52560567140654,"sku":"901314-460","price":41559.0,"currency_code":"USD","in_stock":true},{"title":"NC — Positioner \/ 230V Three Phase","offer_id":52560567173422,"sku":"931315-230","price":54090.0,"currency_code":"USD","in_stock":true},{"title":"NC — Positioner \/ 460V Three Phase","offer_id":52560567206190,"sku":"931315-460","price":54090.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/tr-2b.jpg?v=1788398963","url":"https:\/\/www.fullforceequipment.com\/products\/omga-tr-2b-double-mitre-saw","provider":"FullForce Equipment","version":"1.0","type":"link"}