{"product_id":"omga-tr-2b-i-double-mitre-saw","title":"OMGA TR 2B I — 15\" Compound Twin-Head Double Mitre Saw, 2 × 4 HP","description":"\u003cp\u003eThe TR 2B I is the top of OMGA's double mitre line and the only one whose heads \u003cstrong\u003etilt\u003c\/strong\u003e. Everything else in the family mitres; this one mitres and bevels in the same cycle, on both ends of the piece at once. For anything that meets at a corner in two planes — angled frame work, splayed casework, architectural millwork — that is the difference between one operation and four.\u003c\/p\u003e\n\n\u003cp\u003eIt runs the largest blades in the family at 370 mm (roughly 15\") on two 4 HP motors, cutting 6 3\/4\" wide at 90° and a full 6 3\/4\" on a bevelled cross cut. Distance between the saws runs from 23 5\/8\" to 9'2\". The left head is fixed and the right traverses, with positive locking at 90° and 45° and manual locking in between.\u003c\/p\u003e\n\n\u003cp\u003eThis is a heavy machine at 1,753 lbs. If you do not need compound capability, the \u003ca href=\"\/products\/omga-tr-2b-double-mitre-saw\"\u003eTR 2B\u003c\/a\u003e gives you nearly the same cross cut for considerably less.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power and compressed air required.\u003c\/strong\u003e Available in 230V or 460V three phase only — there is no single-phase version. Clamping is pneumatic, so the machine needs a compressed air supply. Select your version and voltage above before ordering; the machine is built to the voltage you choose.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Version\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTR 2B I INT VIS\u003c\/strong\u003e – includes a \u003cstrong\u003edigital display\u003c\/strong\u003e of the distance between saw blades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTR 2B I INT NC\u003c\/strong\u003e – includes an \u003cstrong\u003eNC positioner\u003c\/strong\u003e that drives the head to the programmed distance automatically, plus \u003cstrong\u003etwo horizontal pneumatic clamps\u003c\/strong\u003e not fitted to the VIS version.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no hand-positioned version of this model — both builds come with length measurement as standard.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilting Heads for Compound Cuts\u003c\/strong\u003e – mitre and bevel together, both ends, one cycle. The only model in the family that does this\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 3\/4\" Bevelled Cross Cut\u003c\/strong\u003e – the same capacity bevelled as square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e370 mm Blades on 2 × 4 HP\u003c\/strong\u003e – the largest and most powerful in the line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9'2\" Maximum Between Saws\u003c\/strong\u003e – full-length architectural stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositive Locking at 90° and 45°\u003c\/strong\u003e – manual locking on intermediate angles\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePneumatic Clamping and Centre Support Included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaw Blades Included\u003c\/strong\u003e – ships with blades fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e370 mm (15\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e1\" (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e2 × 4 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. distance between saws\u003c\/td\u003e\n\u003ctd\u003e9'2\" (2,794 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. distance between saws\u003c\/td\u003e\n\u003ctd\u003e23 5\/8\" (600 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. distance between saws at 45°\u003c\/td\u003e\n\u003ctd\u003e23 5\/8\" (600 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 90°\u003c\/td\u003e\n\u003ctd\u003e6 3\/4\" (171 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 45°\u003c\/td\u003e\n\u003ctd\u003e4 1\/2\" (114 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum bevelled cross cut\u003c\/td\u003e\n\u003ctd\u003e6 3\/4\" (171 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum depth of cut\u003c\/td\u003e\n\u003ctd\u003e4 1\/4\" (108 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead tilt\u003c\/td\u003e\n\u003ctd\u003eYes — compound cutting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust chute\u003c\/td\u003e\n\u003ctd\u003e2 × 3 1\/8\" (2 × 79 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003eThree phase only — 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir supply\u003c\/td\u003e\n\u003ctd\u003eCompressed air required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. shipping weight\u003c\/td\u003e\n\u003ctd\u003e1,753 lbs (795 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e152\" × 45\" × 65\" (386 × 114 × 165 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA TR 2B I in the version and voltage selected above\u003c\/li\u003e\n\u003cli\u003eSaw blades, fitted\u003c\/li\u003e\n\u003cli\u003eMagnetic starter with overload protection\u003c\/li\u003e\n\u003cli\u003eAir filter and regulator\u003c\/li\u003e\n\u003cli\u003eVertical pneumatic clamps and centre support\u003c\/li\u003e\n\u003cli\u003eNC version only: two additional horizontal pneumatic clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/mmQHUITNK70\" title=\"OMGA TR Series double mitre saws\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOMGA's TR Series overview — it covers the TR 2A, TR 2B and TR 2B I together, since all three share the same twin-head design.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eAt 1,753 lbs and 152\" crated, this is the heaviest machine in the line and ships by freight from OMGA in South Bend, Indiana. It will need a forklift or a loading dock at delivery. Freight is quoted separately once we have your complete delivery address — we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"INT VIS — Digital Display \/ 230V Three Phase","offer_id":52560567501102,"sku":"901189-230","price":56806.0,"currency_code":"USD","in_stock":true},{"title":"INT VIS — Digital Display \/ 460V Three Phase","offer_id":52560567533870,"sku":"901189-460","price":56806.0,"currency_code":"USD","in_stock":true},{"title":"INT NC — Positioner \/ 230V Three Phase","offer_id":52560567566638,"sku":"931186-230","price":63837.0,"currency_code":"USD","in_stock":true},{"title":"INT NC — Positioner \/ 460V Three Phase","offer_id":52560567599406,"sku":"931186-460","price":63837.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/tr-2b-i-int-vis.jpg?v=1788399006","url":"https:\/\/www.fullforceequipment.com\/products\/omga-tr-2b-i-double-mitre-saw","provider":"FullForce Equipment","version":"1.0","type":"link"}