{"product_id":"omga-trf-527-double-mitre-saw","title":"OMGA TRF 527 — 8.5\" Twin-Head Double Mitre Saw for Small Profiles","description":"\u003cp\u003eThe TRF 527 is a twin-head double mitre saw built for small profiles — glass beading strip, thin mouldings, light framing stock. Two heads cut both ends of a piece in one operation, so a length comes off the machine finished at both ends rather than needing a second setup and a second measurement.\u003c\/p\u003e\n\n\u003cp\u003eOne head is fixed and the other traverses on a manual transmission, driven by a hand wheel through a toothed belt so the operator can set the distance between blades quickly and repeat it. Positive locking holds 90° and 45°. Maximum distance between the saws is 7'10\", down to 6 1\/4\" at the short end, on 8.5\" blades turning at 3,200 RPM from two 1.5 HP motors.\u003c\/p\u003e\n\n\u003cp\u003eThis is the small machine in OMGA's double mitre line. If you are cutting structural or furniture stock rather than beading, the TR 2A, TR 2B and TR 2B I take the same idea up to 6 3\/4\" of cross cut.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThree-phase power and compressed air required.\u003c\/strong\u003e Available in 230V or 460V three phase only — there is no single-phase version. Clamping is pneumatic, so the machine needs a compressed air supply. Select your version and voltage above before ordering; the machine is built to the voltage you choose.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Version\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRF 527\u003c\/strong\u003e – the standard machine. Distance between blades is set by hand wheel and read off the machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRF 527 VIS\u003c\/strong\u003e – adds a \u003cstrong\u003edigital display\u003c\/strong\u003e of the distance between saw blades, so the operator dials in a length instead of eyeballing it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRF 527 NC\u003c\/strong\u003e – adds an \u003cstrong\u003eNC positioner\u003c\/strong\u003e that drives the head to the programmed distance automatically, and includes \u003cstrong\u003etwo horizontal pneumatic clamps\u003c\/strong\u003e not fitted to the other versions. This is the version for repetitive production runs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Heads, One Operation\u003c\/strong\u003e – both ends of a piece cut to a set length in a single cycle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand Wheel and Toothed Belt Traverse\u003c\/strong\u003e – length changes are quick and repeatable, not a fight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositive Locking at 90° and 45°\u003c\/strong\u003e – the two angles this machine spends its life on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for Small Section Stock\u003c\/strong\u003e – glass beading and thin mouldings, where a big double mitre is the wrong tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePneumatic Clamping Included\u003c\/strong\u003e – vertical clamps and centre support come as standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaw Blades Included\u003c\/strong\u003e – the machine ships with blades fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in Italy\u003c\/strong\u003e – manufactured by DIERREGI S.r.l. under the OMGA brand, sold and serviced from South Bend, Indiana\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade diameter\u003c\/td\u003e\n\u003ctd\u003e8.5\" (220 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw blade bore\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e2 × 1.5 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArbor speed\u003c\/td\u003e\n\u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. distance between saws\u003c\/td\u003e\n\u003ctd\u003e7'10\" (2,390 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. distance between saws\u003c\/td\u003e\n\u003ctd\u003e6 1\/4\" (159 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. distance between saws at 45°\u003c\/td\u003e\n\u003ctd\u003e6 1\/4\" (159 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 90°\u003c\/td\u003e\n\u003ctd\u003e2 5\/32\" (55 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross cut capacity at 45°\u003c\/td\u003e\n\u003ctd\u003e1 9\/16\" (40 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum depth of cut\u003c\/td\u003e\n\u003ctd\u003e1 9\/16\" (40 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBevel \/ compound cutting\u003c\/td\u003e\n\u003ctd\u003eNot available — see the TR 2B I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust chute\u003c\/td\u003e\n\u003ctd\u003e2 × 3 1\/8\" (2 × 79 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003ctd\u003eThree phase only — 230V or 460V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir supply\u003c\/td\u003e\n\u003ctd\u003eCompressed air required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. shipping weight\u003c\/td\u003e\n\u003ctd\u003e650 lbs (295 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated dimensions\u003c\/td\u003e\n\u003ctd\u003e137\" × 27\" × 59\" (348 × 69 × 150 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne OMGA TRF 527 in the version and voltage selected above\u003c\/li\u003e\n\u003cli\u003eSaw blades, fitted\u003c\/li\u003e\n\u003cli\u003eMagnetic starter with overload protection\u003c\/li\u003e\n\u003cli\u003eAir filter and regulator\u003c\/li\u003e\n\u003cli\u003eVertical pneumatic clamps and centre support\u003c\/li\u003e\n\u003cli\u003eNC version only: two additional horizontal pneumatic clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" style=\"aspect-ratio:16\/9;max-width:900px\" src=\"https:\/\/www.youtube.com\/embed\/ps5NTa9_KZI\" title=\"OMGA TRF 527 NC double mitre saw\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe video shows the TRF 527 NC — the version with the automatic positioner. The standard and VIS versions are the same machine with the head set by hand wheel instead.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eAt 650 lbs and 137\" crated, this machine ships by freight from OMGA in South Bend, Indiana. Freight is quoted separately once we have your complete delivery address — we confirm the exact delivered price with you in writing before anything is charged.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessories and options for this machine are available — \u003ca href=\"\/collections\/omga-accessories\"\u003esee OMGA accessories\u003c\/a\u003e or call (888) 990-8016 and we will spec them with you once the machine is chosen.\u003c\/em\u003e\u003c\/p\u003e","brand":"OMGA","offers":[{"title":"Standard \/ 230V Three Phase","offer_id":52560563831086,"sku":"900527-230","price":32081.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ 460V Three Phase","offer_id":52560563863854,"sku":"900527-460","price":32081.0,"currency_code":"USD","in_stock":true},{"title":"VIS — Digital Display \/ 230V Three Phase","offer_id":52560563896622,"sku":"900538-230","price":34307.0,"currency_code":"USD","in_stock":true},{"title":"VIS — Digital Display \/ 460V Three Phase","offer_id":52560563929390,"sku":"900538-460","price":34307.0,"currency_code":"USD","in_stock":true},{"title":"NC — Positioner \/ 230V Three Phase","offer_id":52560563962158,"sku":"931118-230","price":44634.0,"currency_code":"USD","in_stock":true},{"title":"NC — Positioner \/ 460V Three Phase","offer_id":52560563994926,"sku":"931118-460","price":44634.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/1877\/6622\/files\/trf-527.jpg?v=1788398851","url":"https:\/\/www.fullforceequipment.com\/products\/omga-trf-527-double-mitre-saw","provider":"FullForce Equipment","version":"1.0","type":"link"}